Voltage Detectors

HT10000P AC: AC output to 10000 Volts. Delivers 1 through 8 milliamps. Custom outputs to 25 mA. HT10000P DC: DC output to 14000 Volts. Delivers 1 through 5 milliamps. Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures. Rear panel adjustments, leakage limit, ramp time, test time and voltage. Ergonomic design for safety and ease of use. High voltage output jack. Automatic voltage ramp-down circuit eliminates residual voltage. Designed for product development and laboratory use. High efficiency design, low power consumption. All test leads included. Calibrated to NIST standards. 1 year warranty HTT-1 and HTT-1RHipot and Ground Continuity Function Checker Compatible

AC output up to 20,000 V Leakage current up to 5.0 mA. Microcontroller technologies, one button test, easy to setup, LEDs indicates test in progress. Upon failures buzzer sounds and testing is terminated. Output voltage, Leakage current and test duration are controlled in the front panel. Test timer is defeatable. HV connector output with a quarter turn twist lock. Designed for product development and laboratory use. One year calibration cycle. Main shutdown switch in front panel for safety.

DC output: up to 25,000 V. Microcontroller Technology, one button test, easy to setup, LEDs indicate test progress. Upon failure, buzzer sounds and testing is terminated. Leakage current limit, voltage ramp and test duration are controlled from the rear panel. Voltage ramp, arc detection and test timer are defeatable. Separate arc detection circuitry.

The HT-5000P ac 200mA is a special use AC only hipot tester, can deliver up to 200 mA, with voltage output from 0 to 5000 VAC. The leakage current can be set from 5 200 mA in 1 mA increments in the front panel. One year warranty, calibration certificate to ANSI Z540 included. Made in the USA. Features Leakage current up to 200 mA. Microcontroller technologies, one button test, easy to setup, LEDs indicates test in progress. Upon failures buzzer sounds and testing is terminated. Output voltage, Leakage current and test duration are controlled in the front panel. Zero voltage start included. One year calibration cycle. Main shutdown switch in front panel for safety.

A 5000V AC/ 6000VDC hipot tester thats easy to use and priced right. Select AC or DC output via front panel button. Simple for production line personnel, easy to set up. Designed so that operator can defeat the leakage current limit and dielectric breakdown shutoffs to allow troubleshooting and analysis of problems with the DUT. Includes precision leakage current and test time setup and viewing from the LED meter. Adjustment is made with no HV output. Made in the USA. Features AC output: up to 5,000 V. DC output: up to 7,000 V. Microcontroller Technology, one button test, easy to setup, LEDs indicate test progress. Upon failure, buzzer sounds and testing is terminated. Output voltage, leakage current limit and test duration are controlled from the front panel. Arc detection and test timer are defeatable. Separate arc detection circuitry. Main shutdown switch on front panel for safety.

The Compliance West HT-5000P V2 Hipot Tester has a AC ouput range up to 5,000 V and a DC output range up to 6,000 V. The HT-5000P V2 is easy to setup and uses microcontroller technology and has one button test. The Compliance West HT-5000P V2 Hipot Tester has a rugged design with easy-to-use Microcontroller Technology, this AC/DC hipot tests to 5,000Vac @ 10mA and 6,000Vdc @ 5mA. Tested to withstand a 6 drop test with no damage. AC output: up to 5,000 V DC output: up to 6,000 V Microcontroller Technology, one button test, easy to setup LED/s indicate test progress. Upon failure, buzzer sounds and testing is terminated Leakage current limit, voltage ramp-up time and test duration are controlled from the rear panel

The HTT-1R Custom simulates the following failures: Ground Continuity Chassis to Ground (0.01ohm), and/or High Leakage Line to Ground (Custom ohm), and/or Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 400V). The HTT-1R can also be set to simulate passing tests: Ground Continuity Chassis to Ground (0.025 ohm), and/or Normal Leakage Line to Ground (Custom ohm), and /or Dielectric Withstand OK (up to 3000 volts) Arc Testing is at 750 ± 400Vac. Results visible through Front Panel Window. Works with any manufacturers Dielectric Withstand or Ground Continuity Tester. The HTT-1R simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1R The HTT-1R is a passive device. No batteries or power is required. Verifies proper operation of your equipment in less than a minute. Portable. Light weight. Simple to operate. Saves time. For testing of Ground Bond Testers up to 30A.. 1 year warranty.

The HTT-1R Hima simulates the following failures: Ground Continuity Chassis to Ground (0.01ohm), and/or High Leakage Line to Ground (200kohm), and/or Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 400V). The HTT-1R can also be set to simulate passing tests: Ground Continuity Chassis to Ground (0.025ohm), and/or Normal Leakage Line to Ground (424kohm), and /or Dielectric Withstand OK (up to 3000 volts) Arc Testing is at 750 ± 400Vac. Results visible through Front Panel Window. Works with any manufacturers Dielectric Withstand or Ground Continuity Tester. The HTT-1R simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1R The HTT-1R is a passive device. No batteries or power is required. Verifies proper operation of your equipment in less than a minute. Portable. Light weight. Simple to operate. Saves time. For testing of Ground Bond Testers up to 30A.. 1 year warranty.