Showing 307–315 of 380 results
-
$4.279
Operating Range: 40 °C 650 °C Accuracy: 0.1 K at 100 °C, 0.3 K at 300 °C, 0.6 K at 650 °C Stability: 0.03 K at 100 °C, 0.05 K at 300 °C, 0.09 K at 650 °C Uniformity, axial: <, 0.06 K at 100 °C, <, 0.4 K at 650 °C Display Resolution: 0.01 °C Protective Conductor: existing in electric circuit Calibration: calibration report 3.1 Test Piece Insertion Length: 150 mm Interface: RS-232 Power Supply: AC 115 V, 50/60 Hz Power Cord: for USA/Canada, 115 VAC Scope of Delivery: 6.5 mm insert with removal tool, power cord, RS-232 cable and software
-
$4.279
Whether in laboratories, workshops or on site, these temperature dry-well calibrators can meet any calibration requirement. As an option, all instruments are available with an integrated measuring instrument. This enables the measurement of resistances, thermoelectric voltages and also current signals (from thermometers with a 0/4 20 mA transmitter) and their direct display in °C. Using our calibration software and a laptop computer, fully automatic calibrations of electrical thermometers can be carried out anywhere. It is also possible to retrofit the integrable measuring instrument into existing calibrators. The model CTD9300-650 for temperatures up to 650 °C (1,202 °F). This model is mainly used in power plants, plant construction and also the chemical industry. All instruments are fitted with blocks for large inserts, of 28 mm diameter by 150 mm long (1.1 x 5.91 in). The calibration instruments of the CTD9300 series achieve the temperature set point extremely quickly, thanks to a controller developed by us specifically for calibration tasks, thus helping to save costs. Up to 650 °C (1,202 °F) Easy operation via intuitive, user-friendly menus Large, easy-to-read display Short response times due to optimised control Improved accuracy due to homogeneous block temperature
-
$2.728
Operating Range: -20 °C 150 °C (Fahrenheit available) Accuracy: 0.3 K depends on the application Stability: 0.05 K (application as micro-calibration-bath) Uniformity, axial: <, 0.05 K Display Resolution: 0.01 °C up to 100 °C, then 0.1 °C Test Piece Insertion Length: 170 mm Interface: RS-485 Power Supply: AC 100 240 V 50 60 Hz Scope of Delivery: 7-hole insert, liquid, infrared insert, surface insert, power cord and manual Special Features: Ordered calibration will be done at standard points Unit: °C Insert Liquid: not changeable (standard)
-
Sale!
$4.334 Original price was: $4.334.$4.200Current price is: $4.200.
Operating Range: -20 °C 150 °C (Fahrenheit available) Accuracy: 0.3 K depends on the application Stability: 0.05 K (application as micro-calibration-bath) Uniformity, axial: <, 0.05 K Display Resolution: 0.01 °C up to 100 °C, then 0.1 °C Test Piece Insertion Length: 170 mm Interface: RS-485 Power Supply: AC 100 240 V 50 60 Hz Scope of Delivery: 7-hole insert, liquid, infrared insert, surface insert, power cord and manual Special Features: Ordered calibration will be done at standard points Unit: °C Insert Liquid: not changeable (standard)
-
$1.752
One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads
-
$1.752
One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads
-
$1.752
One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads
-
$1.752
One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads
-
$1.752
One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads
