Pumps

Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between. Easily refillable nitrogen cylinder holds enough gas for multiple calibrations Nylon bag to hold hose and fittings attached to inside of lid Includes storage compartment in control panel for pressure reference test gauge Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench Optional padded strap for field use (NPAK-STRP) Made in U.S.A. Pressure Range 0 to 3000 psi (0 to 207 bar) Vacuum Range 0 to 10Hg (0 to 254 mmHG) Temperature range 0 to 130 °F (-18 to 54 °C) Construction ABS Plastic, Aluminum, Anodized Aluminum, Brass, Plated Steel, Stainless Steel, Zippered Nylon with Velcro Seal materials Buna-N, Delrin, Teflon > Each Unit Includes Assembly NPAK Assembly Gauge Adapter 1/8 male NPT x female QT, no check-valve, brass Hose Quick-test hose, brass hose ends, 6 ft (1.83 m) long Hose Quick-test hose, brass hose ends, 3 ft (92 cm) long Hose Adapter 1/4 male NPT x male QT, no check-valve, brass Hose Adapter 1/4 male NPT x male QT, no check-valve, brass

Hand Pump: QTHP 5000 psi / 35 MPa Hydraulic Pump Pressure Reference: Pressure FieldLab, 3000 psi / 200 bar / 20 MPa, Female Quick-test bottom connection Process Connection: 1/4 male NPT x male Quick-test, no check-valve, brass Hose: Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long > Each Unit Includes Pressure FieldLab, 3000 psi / 200 bar / 20 MPa, Female Quick-test bottom connection -FLP1-GR-QF 1/4 male NPT x male Quick-test, no check-valve, brass QTHA-2MB0 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long Hose QTQT-HOS-3ft Bottle with flip top for Hydraulic pump fluid, empty QTHP-BOTL USB-A to Micro USB-B cable, 2m long D-000040 FieldLab AC Power Charger Kit FieldLab Carrying Case

Connect to and calibrate both very low or high pressure instrumentation using included volume controller and pressure gauge Weight 7.71 lb / 3.50 kg Length 1 ft 2 in / 35.56 cm Width 8.50 in / 21.59 cm Height 9.00 in / 22.86 cm Burst Pressure 27,000 psi / 1,862 bar / 185 MPa Charging AC Power (Australia, China, Europe, North America, UK adapters included) DC Auto power (Optional) Color Silver Complies with CSA C22.2 #157 CSA C22.2 #213 CSA C22.2 #61010-1 ISA 12.12.01 UL 913 UL 61010-1 Class 1 Division 1 Groups A,B,C,D Ex ia IIC T4 Ga (-10 &lt, Ta &lt, 50 °C) CE Approval Ex II 1 G Ex ia IIC T4 Ga (-10 &lt, Ta &lt, 50 °C) Datalogging 2 million points Fine Adjustment Resolution 0.0005 PSI Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water Hose 1 Quick-test Hose, Brass ends, 6ft / 1.9m long Hose 2 Quick-test Hose, Brass ends, 3ft / 0.9m long Ingress Protection IP67 (1 meter water submersion for 30 minutes) Inlet Port Male Quick-test Inner Diameter 0.08 in / 0.20 cm LCD Display 3.5 in / 90mm Color TFT LCD Display Length 3, 6 Materials Anodized Aluminum Brass Powder Coated Steel Stainless Steel Max Pressure 3,000 psi / 207 bar / 21 MPa Max Storage Temperature 167 °F / 75 °C Max Temperature 130 °F / 54 °C Max Vacuum 10 inHg / 255 mmHg Measurement Type Gauge Pressure Mechanical Rotation 42 turns (pressure balanced) Media Compatibility Air Inert Gas Min Storage Temperature -20 °F / -29 °C Minimum Bend Radius 1.00 in / 2.54 cm Mounting Holes 3 x M5 Inserts (10 mm deep) Outer Diameter 0.20 in / 0.51 cm Outlet Port Male Quick-test Male Quick-test with cap and chain Pressure Measurement Uncertainty /- 0.02% of Full Scale (0-20% of Full Scale) /- 0.1% of Reading (20-100% of Full Scale) /- 0.25% of Full Scale (Vacuum) Pressure Media Nitrogen, inert gas Pressure Reference Pressure FieldLab, 500 psi / 35 bar / 3.5 MPa Process Connection 1/4 Male NPT Relative Humidity 0% to 90% (-10 to 35°C) 0% to 70% (35 to 50°C) Seal Materials Buna-N Delrin Teflon Type QT USB Connection USB (Type B) Wetted Materials 316 Stainless Steel Wrench Size 15 mm Wrench Size 9/16 In > Each Unit Includes FieldLab AC Power Charger Kit USB cable, Straight A x Right Angle B, shielded, grey, 2 meters long FieldLab Carrying Case Pressure FieldLab, 1000 psi / 70 bar / 7 MPa, Female Quick-test bottom connection 1/4 male NPT x male Quick-test, no check-valve, brass Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long Quick-test 6900 psi hose, brass hose ends, 6 ft (1.83 m) long QTVC Assembly

Ralston Instruments 10,000 psi Hydraulic hand pump is an excellent way to generate high pressure for use in calibration and testing. The pump comes with a hose and process connection, bottle and optional pressure gauge or FieldLab for a complete calibration kit. Easily pump to 10,000 psi without without having to lock a stroke limiting knob Stainless steel for all wetted parts makes pressure very stable, especially at high pressure Priming module allows the user to quickly fill a hose or device under test before pumping with handle Includes Quick-test XT 10,000 psi adapters and hoses for hand tight connections in the field Lightweight 3 lb/1.4 kg and compact so easy to hold and pump with one hand Well balanced because pressurized section is below the reservoir Compatible with water, ethylene glycol, antifreeze, windshield wiper fluid, hydraulic oil, mineral oil and alcohol Unique reservoir material is highly resistant to shock, extreme temperature and chemical exposure Bleed/Vent valve has metal to metal seat for excellent sealing at any pressure Made in the USA > Each Unit Includes XTHP Hydraulic hand pump 3 ft Quick-test test hose 1/4 Male NPT process adapter Bottle

Ralston Instruments 10,000 psi Hydraulic hand pump is an excellent way to generate high pressure for use in calibration and testing. The pump comes with a hose and process connection, bottle and optional pressure gauge or FieldLab for a complete calibration kit. Easily pump to 10,000 psi without without having to lock a stroke limiting knob Stainless steel for all wetted parts makes pressure very stable, especially at high pressure Priming module allows the user to quickly fill a hose or device under test before pumping with handle Includes Quick-test XT 10,000 psi adapters and hoses for hand tight connections in the field Lightweight 3 lb/1.4 kg and compact so easy to hold and pump with one hand Well balanced because pressurized section is below the reservoir Compatible with water, ethylene glycol, antifreeze, windshield wiper fluid, hydraulic oil, mineral oil and alcohol Unique reservoir material is highly resistant to shock, extreme temperature and chemical exposure Bleed/Vent valve has metal to metal seat for excellent sealing at any pressure Made in the USA > Each Unit Includes XTHP Hydraulic hand pump 3 ft Quick-test test hose 1/4 Male NPT process adapter Bottle

The Tentec Aero WTP3 is a self contained electric driven high pressure hydraulic pump unit that can generate pressures of up to 1500 bar. The unit is a perfect match with the Aero wind turbine range of bolt tensioning tools from Tentec. One of the major features of the WTP3 Pump unit is the ability to totally remote control the pump from the controller hand grip. The WTP3 unit is designed to work in adverse environmental conditions, to ensure its durability the unit is certified to IP-56.

The Tentec Aero WTP3 is a self contained electric driven high pressure hydraulic pump unit that can generate pressures of up to 1500 bar. The unit is a perfect match with the Aero wind turbine range of bolt tensioning tools from Tentec. One of the major features of the WTP3 Pump unit is the ability to totally remote control the pump from the controller hand grip. The WTP3 unit is designed to work in adverse environmental conditions, to ensure its durability the unit is certified to IP-56.

The Tentec Aero WTP3 is a self contained electric driven high pressure hydraulic pump unit that can generate pressures of up to 1500 bar. The unit is a perfect match with the Aero wind turbine range of bolt tensioning tools from Tentec. One of the major features of the WTP3 Pump unit is the ability to totally remote control the pump from the controller hand grip. The WTP3 unit is designed to work in adverse environmental conditions, to ensure its durability the unit is certified to IP-56.