Showing 28–36 of 72 results
Get a FREE PM620 Pressure Module Up to a $2690 value!!! when you buy a DPI 620G (any version)… and either the MC620 (module carrier) PART# MC620 pressure module carrier or any PV62x (pressure generation base), PART# PV621G for vacuum to 300 psi (pneumatic) PART# PV622G for vacuum to 1500 psi (pneumatic) PART# PV623G for 0 to 15,000 psi (hydraulic)!
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. The PM620 TERPS is the latest development in resonant silicon pressure sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up or calibration. Total uncertainty from 0.0125% FS Temperature compensated accuracy from -10°C to 50°C (-14°F to 122°F) Simple screw fit hand tight no tools required Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi) Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series Safe and Hazardous area versions available Fully interchangeable with no need for set-up or calibration > Why would you want TERPS PM? Portable and easy to use: Technology that delivers Laboratory level accuracy of pressure measurement in the field Minimize downtime: Time is of the essence during an outage and the TERPS PM enables you to cover more ranges with one TERPS PM due to accuracy level Save money: Four times better long-term stability than current sensors on the market, less drift can facilitate longer calibration intervals as assets remain within tolerances for longer Maximize up time: Increase up time with our interchangeable TERPS PM no need for set up or calibration
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. The PM620 TERPS is the latest development in resonant silicon pressure sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up or calibration. Total uncertainty from 0.0125% FS Temperature compensated accuracy from -10°C to 50°C (-14°F to 122°F) Simple screw fit hand tight no tools required Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi) Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series Safe and Hazardous area versions available Fully interchangeable with no need for set-up or calibration > Why would you want TERPS PM? Portable and easy to use: Technology that delivers Laboratory level accuracy of pressure measurement in the field Minimize downtime: Time is of the essence during an outage and the TERPS PM enables you to cover more ranges with one TERPS PM due to accuracy level Save money: Four times better long-term stability than current sensors on the market, less drift can facilitate longer calibration intervals as assets remain within tolerances for longer Maximize up time: Increase up time with our interchangeable TERPS PM no need for set up or calibration
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. The PM620 TERPS is the latest development in resonant silicon pressure sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up or calibration. Total uncertainty from 0.0125% FS Temperature compensated accuracy from -10°C to 50°C (-14°F to 122°F) Simple screw fit hand tight no tools required Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi) Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series Safe and Hazardous area versions available Fully interchangeable with no need for set-up or calibration > Why would you want TERPS PM? Portable and easy to use: Technology that delivers Laboratory level accuracy of pressure measurement in the field Minimize downtime: Time is of the essence during an outage and the TERPS PM enables you to cover more ranges with one TERPS PM due to accuracy level Save money: Four times better long-term stability than current sensors on the market, less drift can facilitate longer calibration intervals as assets remain within tolerances for longer Maximize up time: Increase up time with our interchangeable TERPS PM no need for set up or calibration
Intrinsically Safe Version PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology. Providing up to four times greater stability and higher accuracy than current pressure measurement technologies. The PM620 TERPS is the latest development in resonant silicon pressure sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up or calibration. Total uncertainty from 0.0125% FS Temperature compensated accuracy from -10°C to 50°C (-14°F to 122°F) Simple screw fit hand tight no tools required Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi) Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series Safe and Hazardous area versions available Fully interchangeable with no need for set-up or calibration > Why would you want TERPS PM? Portable and easy to use: Technology that delivers Laboratory level accuracy of pressure measurement in the field Minimize downtime: Time is of the essence during an outage and the TERPS PM enables you to cover more ranges with one TERPS PM due to accuracy level Save money: Four times better long-term stability than current sensors on the market, less drift can facilitate longer calibration intervals as assets remain within tolerances for longer Maximize up time: Increase up time with our interchangeable TERPS PM no need for set up or calibration
For Series MC Multi-Cal Pressure Calibrator > Each Unit Includes NIST calibration certification
0 psi to 15 psi (0 to 1 bar) (0 to 100 kPa) Compatible Media: Dry Display pressure readings in any of 10 different pressure units you specify in the calibrator setup Rugged urethane molded case protects the module from rough handling and harsh conditions Features internal temperature compensation from 32°F to 122°F for full-accuracy performance Includes NIST-traceable calibration certificate Module can be used with any of the Fluke 740, 750 or compatible 720 or 710 series calibrators Reference class modules have a 0.015% total uncertainty Module has its own serial number to maintain independent traceability Includes an adapter set with each module 3-year warranty > Each Unit Includes NIST-Traceable Calibration Certificate Adapter Set with Each Module 3-year warranty
Field Metrology Well, 33 °C to 350 °C, w/9143-INSX, w/Process Electronics Temperature Range at 23 °C: 33 °C to 350 °C (91 °F to 662 °F) Display Accuracy: ± 0.2 °C Full Range Stability: ± 0.02 °C at 33 °C ± 0.02 °C at 200 °C ± 0.03 °C at 350 °C Axial Uniformity at 40 mm (1.6 in): ± 0.04 °C at 33 °C ± 0.1 °C at 200 °C ± 0.2 °C at 350 °C Radial Uniformity: ± 0.01 °C at 33 °C ± 0.015 °C at 200 °C ± 0.02 °C at 350 °C Loading Effect (with a 6.35 mm reference probe and three 6.35 mm probes): ± 0.015 °C Full Range Hysteresis: 0.03°C Operating Conditions: 0 °C to 50 °C, 0 % to 90 % RH (non-condensing) Environmental Conditions (for all specifications except temperature range): 13 °C to 33 °C Immersion (Well) Depth: 150 mm (5.9 in) Insert OD: 25.3mm (1.00 in) Heating Time: 5 min: 33 °C to 350 °C Cooling Time: 32 min: 350 °C to 33 °C 14 min: 350 °C to 100 °C Resolution: 0.01 ° Display: LCD, °C or °F user-selectable Size (H x W x D): 290 mm x 185 mm x 295 mm (11.4 x 7.3 x 11.6 in) Weight: 7.3 kg (16 lb) The process version provides a built-in two-channel thermometer readout that measures PRTs, RTDs, thermocouples, and 4-20 mA transmitters which includes the 24 V loop supply to power the transmitter. > Each Unit Includes Insert B RS-232 and 9930 Interface-it control software Test Leads
Field Metrology Well, 33 °C to 350 °C, w/9143-INSX Temperature Range at 23 °C: 33 °C to 350 °C (91 °F to 662 °F) Display Accuracy: ± 0.2 °C Full Range Stability: ± 0.02 °C at 33 °C ± 0.02 °C at 200 °C ± 0.03 °C at 350 °C Axial Uniformity at 40 mm (1.6 in): ± 0.04 °C at 33 °C ± 0.1 °C at 200 °C ± 0.2 °C at 350 °C Radial Uniformity: ± 0.01 °C at 33 °C ± 0.015 °C at 200 °C ± 0.02 °C at 350 °C Loading Effect (with a 6.35 mm reference probe and three 6.35 mm probes): ± 0.015 °C Full Range Hysteresis: 0.03°C Operating Conditions: 0 °C to 50 °C, 0 % to 90 % RH (non-condensing) Environmental Conditions (for all specifications except temperature range): 13 °C to 33 °C Immersion (Well) Depth: 150 mm (5.9 in) Insert OD: 25.3mm (1.00 in) Heating Time: 5 min: 33 °C to 350 °C Cooling Time: 32 min: 350 °C to 33 °C 14 min: 350 °C to 100 °C Resolution: 0.01 ° Display: LCD, °C or °F user-selectable Size (H x W x D): 290 mm x 185 mm x 295 mm (11.4 x 7.3 x 11.6 in) Weight: 7.3 kg (16 lb) > Each Unit Includes Insert C RS-232 and 9930 Interface-it control software
No products in the cart.
