Showing 1–9 of 64 results
-
$136
AEMC ® Introduces the NEW Digital FlexProbe ® Models 400D & 4000D. An ideal addition to the electricians tool kit, the Digital FlexProbe ® models can be used for TRMS AC current measurements and are rated at 600V CAT IV. They provide a welcomed solution when accessing electrical conductors is difficult in tight places. Three models are available: The Model 400D, available with either a 6 or 10 sensor, has a measurement range starting at 20mA, and is designed for work in residential, commercial and light industrial applications. It can be used to check electrical distribution systems up to 400 Amps. The Model 4000D, available with a 14 sensor, has a measurement range starting at 100mA and can be used on higher-power industrial installations, as well as electrical utilities for measurements up to 4000 Amps. Although they are high-performance instruments, the Digital FlexProbe ® models remain very simple to use: two buttons are all it takes to start the instrument, deactivate the auto power-off, HOLD the value on the display or store the maximum value (MAX HOLD). The values are read directly on the built-in 4000-count display. They are ergonomically designed for comfortable handheld use even when bulky gloves are required. The optional articulating, magnetic Multifix mounting system accessory makes it simple to hang on a wall, door, table edge or clip onto a belt. Measurement from 20mAAC to 4000A (model dependent) True RMS Safety rating of 600V CAT IV Resolution down to 1mA (model dependent) Auto-ranging HOLD feature Direct reading Compact and simple to use Flexible current sensor Digital FlexProbe with 6 sensor Easy access and measurement, even in confined spaces where access is difficult Sensor diameter 1.77 to >, 3.94 (sensor dependent) > Applications HVAC current measurements Residential and commercial site current monitoring Measuring branch current in breaker panels General AC current measurements Measurement of industrial loads
-
$299
The AmpFlex® is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. Measurement range is 5 to 6000A. Output signal is 0.1mV/A. Sensor length is 60. Accuracy 1% of Reading TRMS measurements when connected to a TRMS instrument No core saturation or damage if overloaded Waterproof sensor Shape Memory for custom pre-shaping of sensor before use Very high frequency response Low phase shift for power measurements Insensitive to DC, measures only AC component on DC AC signals Excellent linearity Lightweight
-
$147
The MR415 is a hall effect current probe with 1 range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 400AAC, 1mV/A & 600ADC, 1mV/A, 4mm Banana Plug Lead The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Automatic Zero DC reset function Auto Power Off enable/disable function Millivolt output compatible with most equipment and instruments Battery life up to 50 hours Safety rating 600V CATIII
-
$158
The MR416 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 40AAC, 60ADC, 10mV/A & 400AAC, 600ADC, 1mV/A, 4mm Banana Plug Lead The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Automatic Zero DC reset function Auto Power Off enable/disable function Millivolt output compatible with most equipment and instruments Battery life up to 50 hours Safety rating 600V CATIII
-
$173
The MR417 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (2m) lead terminated by a BNC connector and can measure up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 40AAC, 60ADC, 10mV/A & 400AAC, 600ADC, 1mV/A, BNC Output The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Equipped with a Zero DC reset function Auto Power Off enable/disable function LED overload and low battery indicators Millivolt output compatible with most equipment and instruments Equipped with a coaxial lead and isolated BNC connectors for direct connection to an oscilloscope Battery life up to 50 hours Safety rating 600V CATIII
-
$173
The MR525 is a hall effect current probe with a single range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 1000AAC, 1mV/A & 1400ADC, 1mV/A, 4mm Banana Plug Lead The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Automatic Zero DC reset function Auto Power Off enable/disable function Millivolt output compatible with most equipment and instruments Battery life up to 50 hours Safety rating 600V CATIII
-
$192
The MR526 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plug and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 100AAC, 150ADC, 10mV/A & 1000AAC, 1400ADC, 1mV/A, 4mm Banana Plug Lead The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Automatic Zero DC reset function Auto Power Off enable/disable function Millivolt output compatible with most equipment and instruments Battery life up to 50 hours Safety rating 600V CATIII
-
$210
The MR527 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs. The probe has a 6.5 ft (2m) lead terminated by a BNC connector and can measure up to 1000AAC and 1400ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied). 100AAC, 150ADC, 10mV/A & 1000AAC, 1400ADC, 1mV/A, BNC Output The jaw shape enables users to clamp on to cables or small busbars Powered by battery or standard external 5V power supply via micro-USB connector Measures up to 1000Aac and 1400Adc (model dependent) Equipped with a Zero DC reset function Auto Power Off enable/disable function LED overload and low battery indicators Millivolt output compatible with most equipment and instruments Equipped with a coaxial lead and isolated BNC connectors for direct connection to an oscilloscope Battery life up to 50 hours Safety rating 600V CATIII
-
$1.317
The AC/DC Current Probe Model J93-BK is a Hall Effect Current Probe designed to measure DC currents up to 5000A and AC currents up to 3500A, without opening the circuit. This probe is for use with Models 8333, 8336, 8435 & PEL Series.
