Pressure Measurement

Perform static pressure calibrations using nitrogen with included calibration manifold, pressure gauge and hoses. 30PSIG Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Each kit comes with the 0.25% full scale accuracy reference test gauge, hoses and pressure gauge adapter needed so that you can start calibrating within minutes Made in U.S.A. > Each Unit Includes Hand Pump DP0V Assembly (DP0V) Hose 2 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Process Connection 1 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Gauge Swivel 1/4 female NPT x female Quick-test, no check-valve, brass (QTHA-2FBA) Gauge Pressure FieldLab, 30 psi / 2 bar / 200 kPa, Female Quick-test bottom connection (FLP1-GF-QF)

Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between. Easily refillable nitrogen cylinder holds enough gas for multiple calibrations Includes storage compartment in control panel for pressure reference test gauge Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench Optional padded strap for field use (NPAK-STRP) Made in U.S.A. Pressure Range 0 to 3000 psi (0 to 207 bar) Vacuum Range 0 to 10Hg (0 to 254 mmHG) Temperature range 0 to 130 °F (-18 to 54 °C) Construction ABS Plastic, Aluminum, Anodized Aluminum, Brass, Plated Steel, Stainless Steel, Zippered Nylon with Velcro Seal materials Buna-N, Delrin, Teflon > Each Unit Includes NPAK Assembly

&lt,h3Complete kit includes nitrogen source, pressure gauge and all fittings and adapters to perform differential and static pressure calibrations using nitrogen. 3KPSIG Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between Easily refillable nitrogen cylinder holds enough gas for multiple calibrations Nylon bag to hold hose and fittings attached to inside of lid Includes storage compartment in control panel for pressure reference test gauge Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench Designed to meet US Department of Transportation (DOT) and Canadian Transport Canada (TC) standards CE Approved for use in European Union Designed to meet Pressure Equipment Directive (PED) and Transportable Pressure Equipment (TPED) standards Made in USA > Each Unit Includes Source NPAK Assembly (NPAK) Hose 1 Quick-test 6900 psi hose, S.S. hose ends, 6 ft (1.83 m) long (QSQS-HOS-6ft) Hose 2 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Process Connection 1 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Process Connection 2 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Gauge Pressure FieldLab, 3000 psi / 200 bar / 20 MPa, Female Quick-test bottom connection (FLP1-GR-QF) > &lt,/h3

Perform static pressure calibrations using nitrogen with included calibration manifold, pressure gauge and hoses. 5KPSIG Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Each kit comes with the 0.25% full scale accuracy reference test gauge, hoses and pressure gauge adapter needed so that you can start calibrating within minutes Made in U.S.A. > Each Unit Includes Manifold QTCM Assembly (QTCM) Hose 1 Quick-test 6900 psi hose, S.S. hose ends, 6 ft (1.83 m) long (QSQS-HOS-6ft) Hose 2 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Process Connection 1 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Process Connection 2 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Gauge Pressure FieldLab, 5000 psi / 350 bar / 35 MPa, 1/4 Female Quick-test bottom connection (FLP1-GT-QF)

Perform static pressure calibrations using nitrogen with included calibration manifold, pressure gauge and hoses. 3KPSIG Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve. Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Each kit comes with the 0.25% full scale accuracy reference test gauge, hoses and pressure gauge adapter needed so that you can start calibrating within minutes Made in U.S.A. > Each Unit Includes Manifold QTCM Assembly (QTCM) Hose 1 Quick-test 6900 psi hose, S.S. hose ends, 6 ft (1.83 m) long (QSQS-HOS-6ft) Hose 2 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Process Connection 1 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Process Connection 2 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Gauge Pressure FieldLab, 3000 psi / 200 bar / 20 MPa, Female Quick-test bottom connection (FLP1-GR-QF)

Perform static pressure calibrations using nitrogen with included calibration manifold, pressure gauge and hoses. 1KPSIG Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Each kit comes with the 0.25% full scale accuracy reference test gauge, hoses and pressure gauge adapter needed so that you can start calibrating within minutes Made in U.S.A. > Each Unit Includes Manifold QTCM Assembly (QTCM) Hose 1 Quick-test 6900 psi hose, S.S. hose ends, 6 ft (1.83 m) long (QSQS-HOS-6ft) Hose 2 Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Process Connection 1 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Process Connection 2 1/4 male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0) Gauge Pressure FieldLab, 1000 psi / 70 bar / 7 MPa, Female Quick-test bottom connection (FLP1-GP-QF)