Showing 91–99 of 221 results
Measuring Range selectable per software: 0.2 A to 20 A 2 A to 200 A > Peak current for sinusoidal currents: 74 A 300 A > Intrinsic error: 0.5% Frequency Range: 40 Hz to 10 kHz Operating Voltage: 300 V CAT IV Phase Error: 0.5 ° Jaw Opening: <, 15 mm diameter or 15 x 17 mm bus bars
Simultaneously measure demand and harmonic waveforms that share the same voltage line over 4-circuits Data can be saved onto a PC card High-speed and continuous processing to measure individual waveforms Measurement line & number of circuits Single-phase 2-wires (4 circuits), Single-phase 3-wires (2 circuits), Three-phases 3-wires (2 or 1 circuit), and Three-phases 4-wires (1 circuit) Note: 50 or 60 Hz, and that share the same voltage line Measurement items Voltage, Current, Active/ reactive/ apparent power, Active/ reactive power integration, Power factor, Frequency, Harmonic waveform value Voltage ranges 150.00 V to 600.00 V AC, 3 ranges Current ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use) Power ranges 75.000 W to 900.00 kW (depends on combination of voltage, current range, and measurement line) Basic accuracy AC Voltage: ±0.2 % rdg. ±0.1 % f.s. AC Current: ±0.2 % rdg. ±0.1 % f.s. current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. current sensor accuracy (at power factor = 1) CLAMP ON SENSOR 9661: ±0.3 % rdg. ±0.01 % f.s. (different from each model) Measurement method Digital sampling, PLL synchronization or 50/60 Hz fixed clock Basic accuracy Active power: ±0.2% rdg. ±0.1% f.s. clamp-on sensor accuracy (at 45 to 66 Hz) Display refresh rate 2 times /sec (except when using a PC card while accessing the internal memory, or when performing RS-232C communications) Data save interval Standard interval: 1 sec to 30 sec, 1 minute to 60 minutes, 13 selects Fast interval: A single waveform, or 0.1, 0.2, or 0.5 sec (at instant value only) Frequency characterristics Fundamental waveforms up to the 50th order ±3% f.s. measurement accuracy (of a 45 to 66 Hz fundamental waveform) Other functions Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, ±5 V DC f.s.) Power supply 100 to 240 V AC, 50/60 Hz, 30 VA max. Dimensions, mass 210 mm (8.27 in) W × 160 mm (6.30 in) H × 60 mm (2.36 in) D, 1.2 kg (42.3 oz) > Each Unit Includes VOLTAGE CORD L9438-53 (Black/ Red/ Yellow/ Blue) Power cord Instruction Manual Quick Start Manual CD-R (RS-232C interface operating manual) Input cord label
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
Measure up to two 3-phase, 3-wire systems (displays voltage and current for three lines) Measure up to four single-phase, 2-wire systems 5 A to 5000 A range Compact and light weight PC card data storage Power recording for individual waveforms Simultaneous recording of demand values and harmonics Basic Accuracy: Voltage: ±0.2 % rdg. ±0.1 % f.s., Current:±0.2 % rdg. ±0.1 % f.s. Clamp accuracy (active power, at 45 to 66 Hz) Measurement Ranges: Voltage: 150 V to 600 V, 3 ranges, Current: 5 A to 5 kA, 8 ranges (use clamp sensor), Power: 750 W to 9 MW, 16 combination patterns Data storage Internal memory: 1 MB, Flash Card: Up to 528 MB Power supply 100 to 240 V AC, 50/60 Hz Dimensions: 210 mm(8.27 in)W × 160 mm(6.30 in)H × 60 mm(2.36 in)D, 1.2 kg (42.3 oz) > Each Unit Includes 9438-03 voltage cord set (1 cord each of black, red, yellow, and blue) Voltage cord Ground adapter (3P to 2P) Input cord label Operating manuals (Advanced edition and Quick Start Guide) CD-R (Advanced edition and RS-232C interface operating manuals) 9441 connection cable
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
Introduction to the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer is an advanced tool designed to measure and analyze power quality in electrical systems. This device plays a crucial role in ensuring the efficiency and safety of electrical infrastructures by providing comprehensive insights into various electrical parameters. By offering precise measurements of voltage, current, power, and harmonics, the Hioki 3169-21-01/1000 aids engineers and technicians in diagnosing and addressing power quality issues effectively. Power quality analysis is vital in maintaining the reliability of electrical systems. Poor power quality can lead to equipment malfunctions, energy losses, and even safety hazards. The Hioki 3169-21-01/1000 addresses these challenges by delivering accurate and reliable data, which allows for timely interventions and corrective measures. This analyzer is particularly valuable in industrial settings, commercial installations, and utility networks where power quality is paramount. The Hioki 3169-21-01/1000 boasts impressive specifications that set it apart in the field of power analysis. It features a broad measurement range, ensuring versatility across different electrical environments. The analyzer provides high accuracy, which is critical for making informed decisions based on its readings. It can measure a wide array of electrical parameters, including voltage, current, power, and harmonics, making it a comprehensive tool for power quality assessment. Hioki, the brand behind the 3169-21-01/1000, has a long-standing reputation for excellence in electrical measurement instruments. Established in 1935, Hioki has consistently been at the forefront of innovation and quality in this domain. The company’s commitment to delivering reliable and high-performance tools is evident in the design and functionality of the 3169-21-01/1000 Power Quality Analyzer. This device is a testament to Hioki’s dedication to supporting electrical professionals with state-of-the-art technology. Key Features and Applications of the Hioki 3169-21-01/1000 The Hioki 3169-21-01/1000 Power Quality Analyzer stands out with a myriad of features designed to enhance the accuracy and efficiency of electrical system analysis. One of the key attributes is its user-friendly interface, which simplifies the process of setting up and operating the device. The clear display and intuitive menu navigation ensure that even users with minimal technical background can effectively utilize the analyzer. Another significant feature is the data logging capability, which allows for comprehensive recording of power quality parameters over extended periods. This functionality is critical for identifying intermittent issues that may not be apparent during short-term analysis. Real-time monitoring is also a standout feature, providing instantaneous feedback on electrical parameters such as voltage, current, power, and harmonics. This real-time data is invaluable for immediate troubleshooting and ensuring ongoing compliance with power quality standards. The Hioki 3169-21-01/1000 also boasts advanced analysis functions, including the ability to perform harmonic analysis up to the 50th order. This level of detail is crucial for diagnosing complex electrical issues and optimizing system performance. The analyzer’s versatility is further enhanced by its various modes of operation, which include single-phase, three-phase three-wire, and three-phase four-wire configurations. These modes cater to a wide range of applications, from residential and commercial buildings to industrial settings. In practical terms, the Hioki 3169-21-01/1000 has been effectively employed in numerous scenarios. For instance, in manufacturing facilities, it aids in detecting and mitigating power quality issues that could lead to equipment malfunctions or downtime. In the utilities sector, the analyzer is used to monitor and ensure the stability of power distribution networks. Additionally, commercial buildings utilize the device for energy audits, helping to identify inefficiencies and optimize energy consumption. Real-world examples further illustrate the analyzer’s capabilities. For example, a case study in a large manufacturing plant demonstrated how the Hioki 3169-21-01/1000 was used to identify and rectify harmonic distortion, resulting in enhanced equipment reliability and reduced maintenance costs. Similarly, in a commercial building, the device facilitated a comprehensive energy audit that led to significant energy savings and improved operational efficiency. Overall, the Hioki 3169-21-01/1000 Power Quality Analyzer is an indispensable tool for professionals aiming to enhance the reliability and efficiency of electrical systems. Its combination of user-friendliness, robust data logging, real-time monitoring, and advanced analytical capabilities make it a versatile solution for a wide array of applications.
No products in the cart.
