Power Analyzers

5 channel, motor analysis, D/A output Basic accuracy of ±0.02%*1 for power measurement (*1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added.) High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics) Accurate measurement even when the load is characterized by large fluctuations, TrueHD 18-bit resolution 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.) DC basic accuracy of ±0.07%, which is key for stable, accurate efficiency measurement Broad frequency band and sampling that are 10 times better than those of legacy models Synchronize 2 units for up to 12 channels*2 in real time *2 Two 6-channel models can be connected with an optical connection cable (over a max. length of 500 m) to enable numerical and waveform synchronization Special triggers to enable waveform analysis and motor analysis without the need for an oscilloscope Wideband harmonic analysis up to the 100th order with a 1.5 MHz band

6 channel, motor analysis, D/A output Basic accuracy of ±0.02%*1 for power measurement (*1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added.) High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics) Accurate measurement even when the load is characterized by large fluctuations, TrueHD 18-bit resolution 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.) DC basic accuracy of ±0.07%, which is key for stable, accurate efficiency measurement Broad frequency band and sampling that are 10 times better than those of legacy models Synchronize 2 units for up to 12 channels*2 in real time *2 Two 6-channel models can be connected with an optical connection cable (over a max. length of 500 m) to enable numerical and waveform synchronization Special triggers to enable waveform analysis and motor analysis without the need for an oscilloscope Wideband harmonic analysis up to the 100th order with a 1.5 MHz band

Immediate recording of the I-V characteristic and of the characteristic parameters I-V400 carries out the field measurement of the I-V characteristic and of the main characteristic parameters both of a single module and of module strings on PV plants (up to a maximum of 1000V and 10A). Immediate compliance test result The acquired data are then processed to extrapolate the I-V characteristic under standard test conditions (STC) in order to proceed comparing them with the rated data declared by the modules’ manufacturer, thus immediately determining whether or not the string or the module under test comply with the characteristics declared by the manufacturer. On the other hand the analysis of IV curve permits to detect any fault condition on each single module composing the string under test. Remote irradiation and temperature measurement Irradiation and temperature measurements play an essential role for extrapolation of the I-V characteristic under standard test conditions. I-V 400 carries out such measurements directly or under remote mode through the optional unit SOLAR-02, synchronized with main unit. I-V 400 can effect measurements at the inverter, while SOLAR-02 simultaneously detects environmental values close to modules without using long cable extensions. Friendly use with possibility of continuous updating of PV modules I-V 400 manages a database of PV modules, which can be updated at any time both via the management software and directly on the instrument through the user interface. Very accurate measurements even using cable extensions Current and voltage measurements on modules or strings are effected with the 4-terminal method, which allows extending measuring cables I-V Curve tracer Voc and Isc measurement Database of 30.000 PV modules curve types Measurement of output voltage from module/string up to 1000V DC Measurement of output current from module/string up to 10A DC Measurement of solar irradiation [W/m2] with reference cell HT304N Measurement of temperature, automatic or by means of probe PT300N Measurement of output DC and nominal power from module/string Numerical and graphical display of I-V characteristic Measurement of the resistance of photovoltaic module series Mechanical inclinometer for incidence angle of solar irradiation 4-terminal measuring method Comparison with standard conditions (STC 1000 W/m2, 25°C) Evaluation of testing result: OK / NO Management of up to 30 types of modules in the internal database Internal memory for data saving Recalling results on the display Optical/USB port for PC connection Help online on the display

DC voltage TRMS voltage with 4 inputs for line(s) and neutral (if any) DC current TRMS current with 4 inputs for line(s) and neutral (if any) DC power Active, reactive and apparent power Active, reactive and apparent energy Power factor and cos-phi Frequency Up to 383 parameters to be recorded at once Integration period selectable from 5 seconds to 60 minutes Voltage and current harmonic analysis up to the 49th order Voltage anomalies (sags, swells) with 10ms resolution Numerical data analysis (DMM function) Graphical display of voltage and current (scope) Harmonic histogram Vectorial diagram of voltages and currents Voltage unbalance Predefined recording settings > Each Unit Includes Built-in memory for data logging Wi-Fi and USB interfaces Android/iOS/Windows software Rechargeable Li-Ion battery with built-in power supply Waterproof IP65 hard carrying case

TRMS voltage measures (5 inputs) TRMS current on phases and neutral (4inputs) Active, reactive and apparent powers measures Active, reactive and apparent energies measures Power factors measure Frequency measure Max 251 selected parameters at the same time Integrated period selectable from 1s to 60min Harmonic analysis of voltage and current up to 49th component Voltage anomalies (sags, swells) with 10ms resolution Numerical and graphical (waveforms) visualization Histogram visualization of harmonic analysis Vectorial diagram of voltages and currents Flicker analysis (Pst, Plt) in compliance to EN50160 Voltage unbalance in compliance to EN50160 Inrush currents measures Predefined and customized recordings configurations TFT colour display with touch screen 15Mbytes internal memory for recordings saving Using of external compact flash and USB pen drives USB interface for PC connection Windows software for recordings analysis Rechargeable Li-Ion battery and external AC/D adapter Contextual help selectable on each screen Virtual keyboard at display > Each Unit Includes PQA 823 KIT800 : Set of 5 cables 5 alligator clips HTFLEX33D : Flexible clamp 3000A AC, diameter 174mm, 4 pcs A0055 : External adapter AC/DC recharging battery YABAT0003HT0 : Li-ION rechargeable battery PT400 : Touch pen TOPVIEW2007 : Windows software USB cable C2007 BORSA2051N : Soft carrying bag User manual on CD-ROM Quick reference guide ISO9000 calibration certificate

Power quality analyser CAT IV with 4 CTs HTFLEX33 Order #: HV000824 Mfg #: HV000824

TRMS P-N, P-P, P-PE voltage measures (5 inputs) TRMS current on phases and neutral (4inputs) Active, reactive and apparent powers measures Active, reactive and apparent energies measures Power factors measure Frequency measure Max 251 selected parameters at the same time Integrated period selectable from 1s to 60min Harmonic analysis of voltage and current up to 49th component Voltage anomalies (sags, swells) with 10ms resolution Numerical and graphical (waveforms) visualization Histogram visualization of harmonic analysis Vectorial diagram of voltages and currents Voltage unbalance Predefined recordings of parameters TFT colour display with touch screen 15Mbytes internal memory for recordings saving Using of external compact flash and USB pen drives USB interface for PC connection Windows software for recordings analysis Rechargeable Li-Ion battery and external AC/D adapter Contextual help selectable on each screen Virtual keyboard at display > Each Unit Includes VEGA 78 KIT800 : Set of 5 cables 5 alligator clips HTFLEX33D : Flexible clamp 3000A AC, diameter 174mm, 4 pcs A0055 : External adapter AC/DC recharging battery YABAT0003HT0 : Li-ION rechargeable battery PT400 : Touch pen TOPVIEW2007 : Windows software USB cable C2007 BORSA2051N : Soft carrying bag User manual on CD-ROM Quick reference guide ISO9000 calibration certificate

Multifunctional Tester for connect with Bluetooth Protocol Order #: ZG47 Mfg #: HT ZG47