Power Analyzers

Measures up to 66Vrms or Vdc Measures up to 65Aac or 14Adc (Probe dependent) Displays Min, Max, and Average Volts and Amps, Crest Factor, Peak value and K-Factor Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase Displays total harmonic distortion (THD-F and THD-R) for voltage and current Displays individual harmonic values and % for Volts and Amps through the 5th harmonic Captures and displays inrush current waveforms and statistics Stores up to eight screen captures Stores up to 1MB of trend recorded data Configurable from DataView software or front panel Download stored data to DataView software via optical USB port Captures up to 496 alarm events from up to 1 different thresholds Displays and records up to 17 different power quality parameters > Each Unit Includes (3) Color-coded Current Probes (4) Color-coded 1 ft Voltage Leads (4) Color-coded Alligator Clips RS-232 DB9F Optically Coupled Serial Cable NiMH Battery US 12V Power Cord DataView Professional software Carrying Bag Soft Carrying Pouch User Manual

True RMS Single-, Two- and Three-PhaseMeasurements at 256 Samples/Cycle, Plus DC Real-Time Color Waveforms Easy-to-Use On-Screen Setup Automatic Current Probe Recognition and Scaling True RMS Voltage and Current Measurement Measures DC Volts, Amps and Power Displays and Captures Voltage, Current and Power Harmonics to 50th Order, Including Direction, in Real-Time Captures Transients Down to 1/256th of a Cycle Stores Comprehensive Data Base of Logged Data Phasor Diagram Display VA, Var And W Per Phase and Total kVAh, VARh and kWh Per Phase and Total Neutral Current Calculated and Displayed for Three-Phase Transformer K-Factor Display Power Factor, Displacement PF Display Captures Up to 51 Transients Short and Long Term Flicker Display Phase Unbalance (Current and Voltage) Harmonic Distortion (Total and Individual) from 1st to 50th Alarms, Surges and Sags Screen Snapshot Function Captures Waveforms or Other Information on the Display > Each Unit Includes Three 193-24-BK AmpFlex® Sensors Dataview® Software for Configuring Data Storage Real-Time Display Analysis and Report Generation

Measurement of TRMS Voltages Up to 1000Vrms AC/DC for Two-, Three-, Four- or Five-Wire Systems Measurement of TRMS Currents Up to 10,000Arms (Sensor Dependent) Direct Measurement of Neutral Current and Voltage Frequency Measurement (40 to 69Hz Systems) Record and Display Trend Data as Fast as Once Per Second for One Month for Up to 25 Variables Transient Detection on all V and I Inputs (Up to 210) Selectable PT and CT Ratios Inrush Current Measurement Calculation of Crest Factors for V and A Calculation of The K-Factor for Transformers Calculation of Short-Term and Long-Term Flicker Calculation of the Three-Phase Voltage Unbalance Harmonic Measurements (Referenced to the Fundamental or RMS Value) for Voltage, Current or Power, Up to 50th Harmonic Stores Up to 10,000 Alarm Events Displays of Harmonic Sequencing and Direction and Calculation of Overall Harmonics Real-Time Display of Phasor Diagrams Including Values and Phase Angles Monitors the Average Value of any Parameter, Calculated for a Period from 1 Sec to 2 Hrs Measurement of Active, Reactive and Apparent Power Per Phase and Their Respective Sum Total Calculation of Power Factor, Displacement Power Factor and Tangent Factor Recording, Time Stamping and Characterization of Disturbance (Swells, Sags and Interruptions, Exceedence of Power and Harmonic Thresholds) 2GB Internal Trend Recording Memory Additional Memory for Alarm, Transient, Inrush and Snapshot Storage Measurement of Energy VAh, VARh, Wh and VADh 65μs/Sample Trend Recording The Max and Min RMS Measurements are Calculated Every Half-Period > Each Unit Includes Dataview® Software for Configuring Data Storage Real-Time Display Analysis and Report Generation

Measurement of TRMS voltages up to 1000Vrms AD/DC for two-, three-, four- or five-wire systems Measurement of TRMS currents up to 6500Arms (sensor dependent) Direct measurement of neutral current and voltage Frequency measurement (40 to 70Hz systems) Records and displays trend data as fast as once per second for one month up to 25 variables Captures up to 210 transient occurrences on all V and A inputs Measures harmonics (referenced to the fundamental or RMS value) for voltage, current or power up to the 50th harmonic Recording, time stamping and characterization of disturbance (swells, sages and interruptions, exceedence of power and harmonic thresholds) 2GB SD Card for Trend Recording memory, Alarm, Snapshot, Transient and Inrush stored in internal flash memory Measures energy VAh, VARh & Wh 65µs/sample transient recording > Each Unit Includes FREE DataView® Software is included for Configuring Real-time Display and Report Generation

Measurement of TRMS voltages up to 1000Vrms AD/DC for two-, three-, four- or five-wire systems Measurement of TRMS currents up to 6500Arms (sensor dependent) Direct measurement of neutral current and voltage Frequency measurement (40 to 70Hz systems) Records and displays trend data as fast as once per second for one month up to 25 variables Captures up to 210 transient occurrences on all V and A inputs Measures harmonics (referenced to the fundamental or RMS value) for voltage, current or power up to the 50th harmonic Recording, time stamping and characterization of disturbance (swells, sages and interruptions, exceedence of power and harmonic thresholds) 2GB SD Card for Trend Recording memory, Alarm, Snapshot, Transient and Inrush stored in internal flash memory Measures energy VAh, VARh & Wh 65µs/sample transient recording > Each Unit Includes FREE DataView® Software is included for Configuring Real-Time Display and Report Generation

The PowerPad III Model 8436 is a three-phase power quality analyzer that is easy-to-use, compact and shock resistant. It enables technicians and engineers to measure and carry out diagnostics and power quality work on one-, two- or three- phase networks. Five voltage and four current inputs are provided. It is IEC 61000-4-30 Class B and safety rated to 600V CAT IV. It is rated IP67 when used with the flexible sensor Ampflex 196A. Measurement of TRMS voltages up to 1000Vrms AC/DC for two-, three-, four- or five-wire systems Measurement of TRMS currents up to 10,000Arms (sensor dependent) 65?s sample rate Direct measurement of neutral current & voltage Record and display trend data as fast as once per second for one month for up to 25 variables Transient detection on all V and I inputs (up to 210) Selectable PT and CT ratios Inrush current measurement Calculation of Crest Factors for V and A Calculation of the K-Factor for transformers Calculation of short and long term flicker and three-phase voltage unbalance Measures harmonics (referenced to the fundamental or RMS value) for voltage, current or power, up to 50th harmonic Displays of harmonic sequencing and direction and calculation of overall harmonics Real-time display of phasor diagrams including values and phase angles Measurement of active, reactive and apparent power per phase and their respective sum total Calculation of power factor, displacement power factor and tangent factor Recording, time stamping and characterization of disturbance (swells, sags and interruptions, exceedance of power and harmonic thresholds) 2GB internal Trend Recording memory, Alarm, Snapshot and Transient/Inrush memories are separate Measurement of energy kVAh, kvarh & kWh The Max and Min RMS measurements are calculated every half-period Includes DataView® software for configuring, real-time display, analysis and report generation > Each Unit Includes Extra large tool bag Accessory pouch 5 ft USB cable Five 10 ft black voltage leads with alligator clips 110V US power cord NiMH battery SD-Card Twelve color-coded input ID markers Quick start guide USB stick containing DataView® software User manual Line power adapter 100-1000V DC to 400Hz Four water-tight AmpFlex® 196A-24-BK

At half the size of previous models, the compact DM-5 brings speed and efficiency to power quality jobs ranging from routine maintenance to in-plant troubleshooting of individual machinery and power distribution panels. Built for use in even the largest facilities, the DM-5 is safety tested to meet the world’s most prestigious safety standards and is rated to CAT IV 300 V, CAT III 600 V, CAT II 1000 V. Simultaneously measures power, harmonics, waveform, power quality (voltage: 3-channel, current: 4-channel) Measures single and three-phase power system with 10 selectable wiring connection settings Test parameters voltage, current, active/reactive/apparent power, PF and frequency all on one screen Quick start mode, wiring check and auto current sensor detection for quick, accurate measurements Automatic recording with memory for up to 1,000 parameters at user defined intervals Includes thin flex current sensor with user selectable input ranges of 300 A, 1000 A, or 3000 A Energy consumption check: Trend and demand graphs for easy view Power quality events: Swell, Dip, Interruption, transients, Inrush current, and flicker Real-time remote monitoring on compatible PC and Android devices via Bluetooth communication Comes complete with measurement accessories, PC software, and large carrying case Safety rated CAT IV 300 V, CAT III 600 V, CAT II 1000 V

Measures the solar power and transmission up to 2000 W/m2, 634BTU / (ft2xh) Power mode – measurement of the power per unit area of incident solar radiation Transmission mode calculates the solar power transmission percentage of the material for example how much solar power in % will be transmitted through the window Convenient to read display with remote sensor technology Selectable measurement units either W/m2 or BTU / ( ft2 x h) > > Data hold Max/min functions to indentify locations with maximum or minimum power