Multimeters

PRV240: Using the PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment Sources both ac and dc steady-state voltage—supplies 240 V dc/ac A single LED indicates functionality, making this unit a simple-to-use solution for complying with TBT verification of your test tool Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact Includes TPak™ Magnetic Hanging Strap Long battery life—5,000 tests per set of four AA batteries > T150: 4 ways to detect AC/DC voltage LED indicators, digital indicator, audible continuity and vibration feedback Backlit screen and indicators for use in poor lighting conditions Switch audible tone on/off for use in areas where quiet is necessary Low battery indicator Detects voltage even when the batteries are dead Improved probe docking system ensures probes can always be easily and safely stored Phase rotation indicator suitable for use on 3 phase systems RCD functionality draw more current from the circuit to intentionally trip an RCD Display hold temporarily stores last value taken on screen Built-in electric torch Single phase voltage for fast identification of live conductors Push-on probe tips Resistance testing up to 1999Ω WearGuard insulation shows damage to test leads CAT IV 600V and CAT III 690V safety rating GS38 compliant probe tips >

Connect the v3001 FC Wireless DC Voltage Module to your test point, and view the results up to 20 meters away on the 3000 FC Wireless Digital Multimeter. You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke Connect ™ modules as a system for multiple measurements. From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the FC Wireless DC Voltage Module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm’s way. AC and DC voltage measurements to 1000 V AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V, IP54 Measure up to 1000 VDC Use as a standalone meter or as part of the system Use the logging function for recording and saving up to 65,000 readings > Each Unit Includes Fluke 3000 FC Series Wireless Multimeter Fluke v3001 DC Voltage Module TL175 Test Leads TL222 Test Leads AC175 Alligator Clips AC220 Alligator Clips Magnetic hanging strap

In addition to a milliohmmeter and a multimeter, an insulation tester has been integrated into the MetraHit 27I for measurements up through the gigaohm range. Especially where service and repairs in the field of aviation technology are involved, the instrument can be used in a broad range of applications. Avionik Set including: Insulation Tester, Milliohmmeter, Multimeter and Data Logger. Insulation resistance measurement 30.00 MOhm to 3.000 GOhm with adjustable test voltage of 50, 100, 250 or 500 V Milliohmmeter: 3.000 mOhm to 300.00 mOhm with 1 A measuring current and 30.00 mOhm to 30.00 Ohm with 200 mA measuring current Kelvin connection (4-wire measurement) Resistance measurement from 300 Ohm to 30 MOhm Voltage measurement from 3 to 600 VDC and 3 to 600 VAC with ±30.000 digits Frequency measurement from 300 Hz to 3 kHz DATA hold memory for up to 1200 measured values Continuity and diode testing Overload protection DAkkS calibration certificate as standard feature LCD including background illumination provided with 3 rechargeable NiMH batteries and a charger as standard equipment > > Each Unit Includes 1 METRA HIT 27I 1 GH18 protective rubber cover with carrying strap 3 size AA NiMH storage batteries 1 NA HIT 27 mains power battery charger 1 KS17-S measurement cable set 1 set of Kelvin clips KC4 (1 set = 2 each) 1 set of Kelvin probes KC27 (1 set = 2 each) 1 HC30 hard case 1 abbreviated operating instructions 1 operating instructions D/GB/F 1 adapter USB-HIT including USB cable and system software METRAwina10/METRA HIT on CD-ROM 1 DAkkS calibration certificate

In addition to a milliohmmeter and a multimeter, an insulation tester has been integrated into the MetraHit 27I for measurements up through the gigaohm range. Especially where service and repairs in the field of aviation technology are involved, the instrument can be used in a broad range of applications. Insulation resistance measurement 30.00 MOhm to 3.000 GOhm with adjustable test voltage of 50, 100, 250 or 500 V Milliohmmeter: 3.000 mOhm to 300.00 mOhm with 1 A measuring current and 30.00 mOhm to 30.00 Ohm with 200 mA measuring current Kelvin connection (4-wire measurement) Resistance measurement from 300 Ohm to 30 MOhm Voltage measurement from 3 to 600 VDC and 3 to 600 VAC with ±30.000 digits Frequency measurement from 300 Hz to 3 kHz DATA hold memory for up to 1200 measured values Continuity and diode testing Overload protection DAkkS calibration certificate as standard feature LCD including background illumination provided with 3 rechargeable NiMH batteries and a charger as standard equipment > Each Unit Includes 1 GH18 protective rubber cover with carrying strap 3 size AA NiMH storage batteries 1 KS17-S measurement cable set 1 NA HIT 27 mains power battery charger 1 set of Kelvin clips KC4 (1 set = 2 each) 1 abbreviated operating instructions 1 operating instructions D/GB/F 1 DAkkS calibration certificate

The MetraHit 27M is a rugged, reliable and compact milliohmmeter, multimeter and a temperature measuring instrument too. It is very well suited for on-site service, as well as for a wide variety of laboratory tasks. Applications apart from general low-ohmig measurements: measuring low value contact resistances at welding seams and riveted joints determination of low-resistance transitions at outer skins of aercraft (lightning protection, wicktest), and for general low-resistance measurements > Milliohmmeter: 3.000 mOhm to 300.00 mOhm with 1 A measuring current and 30.00 mOhm to 30.00 Ohm with 200 mA measuring current Kelvin connection (4-wire measurement) Resistance measurement from 300 Ohm to 30 MOhm Voltage measurement from 3 to 600 VDC and 3 to 600 VAC with ±30,000 digits Frequency measurement from 300 Hz to 3 kHz DATA hold memory for up to 1200 measured values Continuity and diode testing Overload protection DAkkS calibration certificate as standard feature > > Each Unit Includes 1 GH18 protective rubber cover with carrying strap 3 size AA NiMH storage batteries 1 KS17-S measurement cable set 1 abbreviated operating instructions 1 operating instructions D/GB/F 1 DAkkS calibration certificate

Voltage measurement: 0 .. 0.15 / 0 .. 0.5 V=, 0 .. 1.5 / 5 / 15 / 50 / 150 / 500 V= / ~ Input resistance: 20 kOhm / V=, 4 kOhm / V~ Current measurement: 0 .. 50 mA=, 0 .. 1.5 / 15 / 150 mA / 1.5 / 15 A= / ~ Resistance measurement: 1 Ohm .. 1 MOhm (4 ranges) Level: -15 .. 56 dB (6 ranges) Accuracy: class 2.5 Dimensions: 92 x 126 x 45 mm Weight: approx. 0.25 kg without battery Battery: 1.5 V IEC LR 6 (AA Mignon) > Each Unit Includes 1 analog resistance measuring instrument (without battery or cable set) 1 operating instructions

The new STARLINE generation instruments including METRAHIT BASE, PRO andX-TRA, are rugged, reliable digital multimeters with housings made of impact-resistant plastic. They feature a new design and are equipped with state-of-the-art technology. Resolution: ± 12,000 digits, 4½-place 3 connector jacks with patented automatic blocking sockets (ABS) TRMS AC and AC / DC function Voltage measurement with a basic accuracy- of ±0.05% (V DC) Automatic and manual measuring range selection Automatic storage of measured values: DATA / MIN / MAX Large, light-blue illuminated display with extra-large characters (15 mm) and an analog bar graph for dynamic processes Separate battery and fuse compartments IP 52 protection against dust and water Measuring categories: 1000 V CAT III and 600 V CAT IV Made in Germany DAkkS calibration certificate included > Specific features of the BASE multimeter: 12 multimeter functions Voltage ACTRMS, voltage AC DC TRMS, voltage DC, frequency (Hz), resistance, diode test, continuity test, current TRMS via additional current sensors with voltage output, adjustable clamp parameters, temperature with type K thermocouples > Each Unit Includes 1 multimeter 1 pair of safety measurement cables (1.5 m) with 4 mm test probes, 1000 V CAT III, 600 V CAT IV (KS17-2) 2 batteries, 1.5 V, type AA 1 condensed operating instructions, English/German 1 CD ROM, content: operating instructions in English and German) 1 DAkkS calibration certificate

The new, professional METRAHIT ENERGY multimeter is exceeding all previous performance limits. Thanks to simultaneous TRMS current and voltage measurement (AC, AC DC and DC) with a resolution of 60,000 digits, all important power quantities can be precisely acquired. RMS measurement with the following and more: V AC TRMS, V AC DC TRMS 100 kHz with bandwidth, V DC, dB, Hz (V), Hz (A), Ω, µF, V diode, °C / F (TC / RTD) Power measurement (W, VAr, VA, PF): active, reactive and apparent power with extreme values, power factor Energy measurement (Wh, VArh, VAh) active, reactive and apparent energy, mean power value with adjustable observation period and maximum value Mains quality analysis: recording of over and undervoltage, dips, swells, voltage peaks and transients in 0, 50 and 60 Hz systems Harmonic analysis: RMS values and distortion components up to the 15th harmonic at 16.7, 50, 60 and 400 Hz > Special measuring functions: Crest factor (CF), conductivity (nS), low impedance (RSL), duty cycle (%), cable length (km) Triple display, display illumination can be activated for difficult lighting conditions Resolution: 60,000 digits (4 6/7 place) 1 kHz / -3 dB low-pass filter can be activated Direct current measurement from 10 nA to 10 A, 16 A intermittently current measurement with current clamp transformers and sensors, transformation ratio is taken into account at the display Measurement data memory for up to 300,000 measured values Instrument is fully remote controllable without activating the rotary switch or changing current sockets > Each Unit Includes 1 multimeter 1 pair of safety measurement cables (1.5 m) with 4 mm test probes, 1000 V CAT III, 600 V CAT IV (KS17-2) 2 batteries, 1.5 V, type AA 1 condensed operating instructions, English/German 1 CD ROM, content: operating instructions in English and German) 1 DAkkS calibration certificate