Multifunction Calibrators

Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators. Use it as a milliamp and voltage calibrator Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters Simulate 2-Wire Transmitters Power up transmitters & loops with the built-in 24 V power supply Simplify HART hookups with built-in 250 Ohm resistor > Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058). Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types. Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz. Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure Easy to read Turn on the backlight & easily see the display in dark areas of the plant. Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility. > Each Unit Includes Four “AA” Alkaline batteries Certificate of Calibration Blue Rubber Boot Evolution Hands Free Carrying Case Evolution mA/V Test Leads 1 Red & 1 Black Lead with Banana Plugs & Alligator Clips Evolution RTD Wire Kit 2 Red & 2 Black Leads with Banana Plugs & Spade Lugs

Save over $393 with the PIE 820ELITE F VIP Kit. Limited Time Offer. FREE Fenix TK75 LED Searchlight, 4,000 Lumens with Batteries and Charger FREE 128 Pack of Green Calibration Labels Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators. Use it as a milliamp and voltage calibrator Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters Simulate 2-Wire Transmitters Power up transmitters & loops with the built-in 24 V power supply Simplify HART hookups with built-in 250 Ohm resistor > Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058). Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types. Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz. Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure Easy to read Turn on the backlight & easily see the display in dark areas of the plant. Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility.

Save over $147 with the PIE 820ELITE L VIP Kit. Limited Time Offer. FREELeatherman Sidekick Fuse Tool FREEAmprobe 5XP Digital Multimeter FREE 128 Pack of Green Calibration Labels Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators. Use it as a milliamp and voltage calibrator Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters Simulate 2-Wire Transmitters Power up transmitters & loops with the built-in 24 V power supply Simplify HART hookups with built-in 250 Ohm resistor > Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058). Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types. Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz. Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure Easy to read Turn on the backlight & easily see the display in dark areas of the plant. Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility.

Save over $95 with the PIE 820ELITE T VIP Kit. Limited Time Offer. FREE39 Piece SAE/Metric 6 pt. Standard Socket Set, Multi-Drive FREE 128 Pack of Green Calibration Labels Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators. Use it as a milliamp and voltage calibrator Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters Simulate 2-Wire Transmitters Power up transmitters & loops with the built-in 24 V power supply Simplify HART hookups with built-in 250 Ohm resistor > Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058). Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types. Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz. Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure Easy to read Turn on the backlight & easily see the display in dark areas of the plant. Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility.

Detect ‘hidden’ loop problems: Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments! Check all loop parameters at once with the LoopScope™: Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! Automatically detect 2, 3 or 4 wire RTDs: Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor Swap out faulty transmitters to diagnose control issues: Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the     LoopScope to     simultaneously see the loop current, power supply voltage and loop loads for troubleshooting Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. As easy to use as single function PIE Calibrators. Turn on the backlight to easily see the display in dark areas of the plant. Connections diagrams are indicated on the display for each function along with a labeled connector and a help chart behind the tilt stand. Calibrate with Confidence Accurate to ±0.02% of Reading 0.01% Full Scale. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability. Guaranteed Compatibility with process inputs Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 T/C and 9 RTD types to 0.1°C and 0.1°F • Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.

Save over $393 with the PIE 830 F VIP Kit. Limited Time Offer. FREE Fenix TK75 LED Searchlight, 4,000 Lumens with Batteries and Charger FREE 128 Pack of Green Calibration Labels Detect ‘hidden’ loop problems: Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments! Check all loop parameters at once with the LoopScope™: Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! Automatically detect 2, 3 or 4 wire RTDs: Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor Swap out faulty transmitters to diagnose control issues: Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the     LoopScope to     simultaneously see the loop current, power supply voltage and loop loads for troubleshooting Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. As easy to use as single function PIE Calibrators. Turn on the backlight to easily see the display in dark areas of the plant. Connections diagrams are indicated on the display for each function along with a labeled connector and a help chart behind the tilt stand. Calibrate with Confidence Accurate to ±0.02% of Reading 0.01% Full Scale. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability. Guaranteed Compatibility with process inputs Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 T/C and 9 RTD types to 0.1°C and 0.1°F • Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.

Save over $147 with the PIE 830 L VIP Kit. Limited Time Offer. FREELeatherman Sidekick Fuse Tool FREEAmprobe 5XP Digital Multimeter FREE 128 Pack of Green Calibration Labels Detect ‘hidden’ loop problems: Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments! Check all loop parameters at once with the LoopScope™: Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! Automatically detect 2, 3 or 4 wire RTDs: Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor Swap out faulty transmitters to diagnose control issues: Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the     LoopScope to     simultaneously see the loop current, power supply voltage and loop loads for troubleshooting Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. As easy to use as single function PIE Calibrators. Turn on the backlight to easily see the display in dark areas of the plant. Connections diagrams are indicated on the display for each function along with a labeled connector and a help chart behind the tilt stand. Calibrate with Confidence Accurate to ±0.02% of Reading 0.01% Full Scale. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability. Guaranteed Compatibility with process inputs Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 T/C and 9 RTD types to 0.1°C and 0.1°F • Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.

Save over $95 with the PIE 830 T VIP Kit. Limited Time Offer. FREE39 Piece SAE/Metric 6 pt. Standard Socket Set, Multi-Drive FREE 128 Pack of Green Calibration Labels Detect ‘hidden’ loop problems: Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments! Check all loop parameters at once with the LoopScope™: Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! Automatically detect 2, 3 or 4 wire RTDs: Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor Swap out faulty transmitters to diagnose control issues: Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the     LoopScope to     simultaneously see the loop current, power supply voltage and loop loads for troubleshooting Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. As easy to use as single function PIE Calibrators. Turn on the backlight to easily see the display in dark areas of the plant. Connections diagrams are indicated on the display for each function along with a labeled connector and a help chart behind the tilt stand. Calibrate with Confidence Accurate to ±0.02% of Reading 0.01% Full Scale. Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability. Guaranteed Compatibility with process inputs Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 T/C and 9 RTD types to 0.1°C and 0.1°F • Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span plus continuous ramp. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.