Multifunction Calibrators

One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Scale from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads

One or two pressure sensors 10” H2O (pending) to 3000 PSI Differential (dry/dry or wet/wet), Gauge, Compound and Absolute types ±0.025% of Full Sclae from 10-100% FS, ±0.002% of FS below 10% No temperature effect from -20º to 50º C (-4º to 122º F) Measure mA / V DC (±100 mA / ±50 V) Source mA / V DC (0 24 mA / 0 24 V) Sink current (0 24 mA) Source 24 VDC and simultaneously measure loop mA mA / V accuracy: ±(0.015% of Reading 0.002 units) Data Logging with internal SD card, supports 100 data files Alkaline battery power > Each Unit Includes CE mark Soft case Table stand Test leads

Kit includes: Test lead kit, batteries, RS-232 serial cable, universal power adapter, protective boot, and software CD Multifunctional Tester with modular calibrator, HART Communication, and documentation with Meriams DMS Database Software Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature and Valve devices Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules Manage calibrations, store calibration data, store HART configurations and upload to DMS Database software Field Upgradeable via Internet download of HART device profiles (DOFs) and operating firmware /- 0.025% FS traceable to NIST with full temperature compensation from 23-122 F

Kit includes: Test lead kit, batteries, RS-232 serial cable, universal power adapter, protective boot, and software CD Multifunctional Tester with modular calibrator, HART Communication, and documentation with Meriams DMS Database Software Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature and Valve devices Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules Manage calibrations, store calibration data, store HART configurations and upload to DMS Database software Field Upgradeable via Internet download of HART device profiles (DOFs) and operating firmware /- 0.025% FS traceable to NIST with full temperature compensation from 23-122 F

Multifunction Calibrator — HART Communication 3 Year Upgrade Three Modular Sensor Bays View up to Four Simultaneous Measurements on the Configurable Display Interchangable Modules — Vacuum/Differential/Gauge/Absolute Pressure — Temperature Measure and Simulate T/C — Supply 24 VDC Source mA or VDC Measure Voltage/Current Field Upgradeable Firmware Supports Module Field Re-Calibration > Each Unit Includes Test Lead Kit Batteries RS-232 Serial Cable Universal Power Adapter Protective Boot Users Manual CD (includes Users Manual and DPC Manager Utility)

This model is Intrinsically safe for hazardous areas Kit includes: Test lead kit, batteries, RS-232 serial cable, universal power adapter, protective boot, and software CD Multifunctional Tester with modular calibrator, HART Communication, and documentation with Meriams DMS Database Software Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature and Valve devices Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules Manage calibrations, store calibration data, store HART configurations and upload to DMS Database software Field Upgradeable via Internet download of HART device profiles (DOFs) and operating firmware /- 0.025% FS traceable to NIST with full temperature compensation from 23-122 F

This model is Intrinsically safe for hazardous areas Kit includes: Test lead kit, batteries, RS-232 serial cable, universal power adapter, protective boot, and software CD Multifunctional Tester with modular calibrator, HART Communication, and documentation with Meriams DMS Database Software Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature and Valve devices Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules Manage calibrations, store calibration data, store HART configurations and upload to DMS Database software Field Upgradeable via Internet download of HART device profiles (DOFs) and operating firmware /- 0.025% FS traceable to NIST with full temperature compensation from 23-122 F

The MFT 4010 is a multifunctional calibrator with full HART digital communications capability It can be used to measure pressure, differential pressure, to source or measure temperature, to source or measure voltage or current, to calibrate field devices, and to document the performance of field devices The MFT 4010 consists of a handheld base unit with three bays for sensor modules The MFT 4010 pressure modules are NIST traceable to /- 0.025% of full scale and are fully temperature compensated for the best accuracy across a broad temperature range RTD and T/C modules measure or simulate a wide variety of temperature types with NIST traceable accuracy