Showing 55–63 of 79 results
-
$3.493
Augmenting Megger’s DLRO10 and 10X range the DLRO10HD combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation. The DLRO10HD measures low resistance values in applications ranging from railways and aircraft to resistance of components in industry. It is well suited to measuring thick conductors, bonds and quality of welding because of its 10 A range for resistance values up to 250 mΩ. The included 1000-809 lead set is intended to measure the resistance of the lightning protection circuit of a wind turbine, either in part in a production environment, or fully assembled during commissioning, maintenance, or following repair. This lead set is designed to be connected to any instruments in the Megger 10 A DLRO range or the Megger BT51. However, for outside use the DLRO10HD is recommended due to it robustness and high IP rating. High or low output power selection for condition diagnosis Rechargeable battery or line power supply, continuous operation, even with dead battery 10 A for 60 seconds, less time waiting to cool, great for charging inductance High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only) Rotary switch selects one of five test modes, including auto start on connection, giving ease of use Equally at home in the laboratory, the workshop or in the field, on the bench or on the ground, Megger’s new heavy duty DLRO10HD low resistance ohmmeter combines rugged construction with accuracy and ease of use It features an internal rechargeable battery and can also operate from a mains supply, even if the battery is completely flat Wind Turbine Lightning Protection Test Lead Set Megger DLRO Booklet > Each Unit Includes DLRO-10HD DH4 duplex handspike 1.2m Test lead pouch (lid mounted) DLRO10HD user guide CD Warranty book Wind Turbine Lightning Protection Test Lead Set Megger DLRO Booklet
-
$2.612
Augmenting Meggers DLRO10 and 10X range the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage. These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds. The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument. Details of which can be found in the ordering information panel of this data sheet. The DLRO10HDX provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch. A simple control panel enables easy navigation for configuration settings. NEW Onboard memory storage for test results up to 200 records (HDX only) Download to PowerDB NEW interchangeable test lead terminations High or low output power selection for condition diagnosis Operates from battery or AC mains supply Protected to 600 V without blowing a fuse, test lead live voltage warning light Heavy duty case: IP 65 lid closed, IP54 operational Simple rotary switch selection of five test modes, including auto start on connection Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements 7Ah lead acid battery provides extended operation and can be charged whilst operating from line power Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery
-
$2.612
Augmenting Meggers DLRO10 and 10X range the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage. These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds. The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument. Details of which can be found in the ordering information panel of this data sheet. The DLRO10HDX provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch. A simple control panel enables easy navigation for configuration settings. Save over $490 with this VIP Kit! (FREE transit case included) NEW Onboard memory storage for test results up to 200 records (HDX only) Download to PowerDB NEW interchangeable test lead terminations High or low output power selection for condition diagnosis Operates from battery or AC mains supply Protected to 600 V without blowing a fuse, test lead live voltage warning light Heavy duty case: IP 65 lid closed, IP54 operational Simple rotary switch selection of five test modes, including auto start on connection Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements 7Ah lead acid battery provides extended operation and can be charged whilst operating from line power Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery
-
$2.715
Augmenting Meggers DLRO10 and 10X range the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage. These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds. The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument. Details of which can be found in the ordering information panel of this data sheet. The DLRO10HDX provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch. A simple control panel enables easy navigation for configuration settings. NEW Onboard memory storage for test results up to 200 records (HDX only) Download to PowerDB NEW interchangeable test lead terminations High or low output power selection for condition diagnosis Operates from battery or AC mains supply Protected to 600 V without blowing a fuse, test lead live voltage warning light Heavy duty case: IP 65 lid closed, IP54 operational Simple rotary switch selection of five test modes, including auto start on connection Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements 7Ah lead acid battery provides extended operation and can be charged whilst operating from line power Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery
-
$2.715
Augmenting Meggers DLRO10 and 10X range the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage. These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds. The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument. Details of which can be found in the ordering information panel of this data sheet. The DLRO10HDX provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch. A simple control panel enables easy navigation for configuration settings. Save over $490 with this VIP Kit! (FREE transit case included) NEW Onboard memory storage for test results up to 200 records (HDX only) Download to PowerDB NEW interchangeable test lead terminations High or low output power selection for condition diagnosis Operates from battery or AC mains supply Protected to 600 V without blowing a fuse, test lead live voltage warning light Heavy duty case: IP 65 lid closed, IP54 operational Simple rotary switch selection of five test modes, including auto start on connection Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements 7Ah lead acid battery provides extended operation and can be charged whilst operating from line power Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery
-
$2.715
Augmenting Meggers DLRO10 and 10X range the DLRO10HDX combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation and provides memory storage. These units are powered from either rechargeable battery or mains power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO10HDX provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds. The DLRO10HDX is rated CAT III 300 V provided the optional terminal cover is fitted to the instrument. Details of which can be found in the ordering information panel of this data sheet. The DLRO10HDX provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch. A simple control panel enables easy navigation for configuration settings. Save over $490 with this VIP Kit! (FREE transit case included) NEW Onboard memory storage for test results up to 200 records (HDX only) Download to PowerDB NEW interchangeable test lead terminations High or low output power selection for condition diagnosis Operates from battery or AC mains supply Protected to 600 V without blowing a fuse, test lead live voltage warning light Heavy duty case: IP 65 lid closed, IP54 operational Simple rotary switch selection of five test modes, including auto start on connection Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements 7Ah lead acid battery provides extended operation and can be charged whilst operating from line power Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery
-
$2.424
Megger Model # DLRO-10X Accurate results in under three seconds Auto current reversal cancels standing emfs Fuse protected to 600 V NiMH battery reduces weight 250 mW power limit (with optional override) to avoid heating the test sample Automatically detects continuity in potential and current connections Visible warning of high voltages present at the terminals Visible warning of current flowing in the test sample Multiple operating modes including fully automatic Alpha-numeric keypad for entering test notes User setable high and low limits Autoranging with Manual option Printer output and memory > Each Unit Includes NiMH battery module Two duplex handspikes 1.2m/4 ft,one with indicator lights Battery charger for operation from 115/230V/ 50/60 Hz Cigar lighter adapter for battery charging User guide Warranty manual
-
$3.074
Megger Model # DLRO-10 Accurate results in under 3 seconds Designed for the rigors of onsite testing and laboratory use Four-wire measurement technique cancels out lead resistance Auto current reversal cancels standing emfs Continuous not pulsed current Fuse protected to 600V NiMH battery reduces weight Automatically detects continuity in potential and current connections Visible warning of high voltages present at the terminals Visible warning of current flowing in the test sample 5 operating modes including fully automatic > Each Unit Includes NiMH battery module Two duplex handspikes 1.2m/4 ft,one with indicator lights Battery charger for operation from 115/230V/ 50/60 Hz Cigar lighter adapter for battery charging User guide Warranty manual
-
$2.983
A new addition to the comprehensive range of Megger Low Resistance Ohmmeters, the DLRO100 enables low resistance measurement, across multiple applications, in areas without access to mains power. The integral Li-on battery supplies a constant 100A current for up to 30 minutes or up to 360 Manual/Auto tests to enable enhanced productivity in remote locations. With a focus on user safety, advanced design features ensure the safe operation of the instrument in the most adverse conditions, including a CATIV 600V safety rating in accordance with IEC61010. The rugged design, intuitive interface and IP54 (lid open) rating ensure reliability and ease of use in the most arduous of conditions. Mains Only Rugged Design for Use in Demanding Environments Adjustable 10-100A Output, 4 Terminal Measurement 0.1μΩ to 2 Ω Measurement Range 0.1μΩ Resolution Accuracy of ±0.05 μΩ Between 0.1 μΩ and 10 μΩ, ±0.2% Between 10 μΩ and 2 Ω CATIV 600V Safety Rating Battery and Mains Powered Battery Capacity 360 Single Tests or up to 30 Minutes Continuous 1c00A output Memory Storage USB Download Capability Adjustable Current Ramp Rates and Test Duration Low Ripple D.C. IP Rating 67 (Lid Closed) IP54 (Lid Open Battery Operation Only) Large, Clear LCD Display Time and Date Stamped Memory for Recording of Results (999 Readings) > Each Unit Includes Line Cord Quick Start Guide Certificate of Test Calibration Certificate Information CD
