Microohmmeters / DLROs

Instantaneous check on battery deterioration. Model 3555 for compact storage batteries: portable telephones and similar applications Support for high-capacity batteries For compact storage batteries (portable telephones) The increasing importance of battery testing Three-rank rating of battery state: Pass, Warning, or Fail

Measures down to 1µohms 6 Ranges from 2.000mohms to 200.0ohms Maximum Resolution of 1µohms Four Terminal Measurement 0-2.000mohm /- 5% 0-20.00mohm /- 4% 0-200.0mohm /-4% 0-2.000ohm /- 3% 0-20.00ohm /- 2% 0-200.0ohm /- 2% > Each Unit Includes Test Leads Charger Instruction Manual

1 µΩ resolution, 4½ digits Range: 1 µΩ 200 Ω 0.02% basic accuracy Digital output Pulsed mode for auto-zero or constant dc Probes for chips and traces Choices of Probes for all applications Optional Battery Operation for field / shop floor use > Each Unit Includes LOM-501 4-Terminal-Kelvin Clips

Agilent Model # 34420A 7 ½ digits resolution 100 pV / 100 nOhm sensitivity 1.3 nVrms / 8 nVpp noise performance Built-in low noise 2 channel scanners 3 low power, dry circuit testing built-in resistance functions Direct SPRT, RTD, Thermistor, and Thermocouple measurements > Each Unit Includes Low-thermal input cable (34102A) Low-thermal shorting plug (34103A) Kelvin clip set (11062A) Operating manual Service manual Quick reference guide Test report with calibration sticker 2.3 ml bottle of contact cleaner Power cord Includes BV0001B Digital Multimeter app

High or low output power selection for condition diagnosis Rechargeable battery or line power supply, continuous operation, even with dead battery 10 A for 60 seconds, less time waiting to cool, great for charging inductance High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only) Rotary switch selects one of five test modes, including auto start on connection, giving ease of use Equally at home in the laboratory, the workshop or in the field, on the bench or on the ground, Megger’s new heavy duty DLRO10HD low resistance ohmmeter combines rugged construction with accuracy and ease of use It features an internal rechargeable battery and can also operate from a mains supply, even if the battery is completely flat > Each Unit Includes KC1 kelvin clip 3m leads Test lead pouch (lid mounted) DLRO10HD user guide CD Warranty book

The Megger 241005-7 series duplex test lead with gold-plated Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. Megger Catalog # 241005-7 Duplex Kelvin Clips (2) .5 (1.3 cm) old Plated 10A Max Test Current 7 Ft

The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35 (9 mm) between the current and potential probe tips on the duplex hand spikes. Megger Model # 242002-18 Fixed-Point, Heavy-Duty Hand Spike Terminations, 10A Max. Test Current Duplex Test Leads 10A Maximum Current 18ft Long

The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. Duplex Test Leads Heavy-Duty Fixed Point Hand Spikes 10 A 30 ft