Megohmmeters and Insulation Testers

Single range testing voltage 1000 V, Insulation meter up to 2000 Mohms Built tough to withstand a 1-meter drop onto a concrete floor Bright LED luminous scale Check for live circuits and for the battery status Hard case in a body, quick and easy storage without disconnecting the leads Testing voltage 1000 V DC Rated resistance 2000 Mohm Accuracy 1st effective measuring range ±5 % of indicated valu 2 to 1000 Mohm Lower limit resistance 1 Mohm (measurement resistance value to be maintained testing voltage) Overload protection 1200 V AC (10 sec.) AC voltage measurement 0 to 600 V (50/60 Hz), ±5 % of maximum scale value accuracy, 500 kohm or more input resistance Other functions Bright LED luminous scale, Drop proof (on concrete, 1 m/1 time), Battery check, Live circuit check, Auto discharge Power supply LR6 (AA) alkaline batteries ×4, Continuous use: 15 hours (at 500 V range, no load) Dimensions, mass 159 mm (6.26 in)W × 177 mm (6.97 in)H × 53 mm (2.09 in)D, 610 g (21.5 oz), (including battery, not including test lead) > Each Unit Includes Test Lead Instruction Manual 4 LR6 (AA) alkaline batteries Shoulder strap

5-range testing voltage 50 V/100 Mohms to 1000 V/4000 Mohms Stable & medium-speed digital readings, response time at PASS/ FAIL decision 0.8 second Drop proof onto concrete from 1m (3.28 feet) Bright LED luminous LCD, Test lead with bright LED lamp to illuminate near hand (Option L9788-11 or L9788-10) Continuity check via 200 mA testing Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles DC voltage measurement 4.2V (0.001V resolution) to 600V (1V resolution), 4 ranges, Accuracy: ±1.3% rdg. ±4 dgt., Input resistance: 100 kO or higher AC voltage measurement 420V (0.1V resolution) / 600V (1V resolution), 2 ranges, 50/60 Hz, Accuracy: ±2.3% rdg. ±8 dgt., Input resistance: 100 kO or higher, Average rectifier Low resistance measurement For checking the continuity of ground wiring, 10 O (0.01 O resolution) to 1000 O (1 O resolution), 3 ranges, Basic accuracy: ±3 % rdg. ±2 dgt., testing current 200 mA or more (at 6 O or less) Display Semi-transmissive FSTN LCD with back lighting, bar-graph indicator Response time Approx. 0.8 second for PASS/FAIL decision (at HIOKIs conditions) Other functions Live circuit indicator, Automatic electric discharge, Automatic DC/AC detection, Comparator, Drop proof, Auto power save Power supply LR6 (AA) alkaline batteries × 4 Continuous use: 20 hours (at HIOKI’s conditions) Number of measurements: 1000 times (at 5 s ON, 25 s OFF cycle, insulation measure of lower limit resistance value to maintain nominal output voltage) Dimensions, mass 159 mm (6.26 in) W × 177 mm (6.97 in) H× 53 mm (2.09 in) D, 600 g (21.2 oz) (including batteries, excluding test leads) > Each Unit Includes Test Lead Neck Strap Instruction Manual 4 LR6 (AA) alkaline batteries

5-range testing voltage 50 V/100 MO to 1000 V/4000 Mohms Stable & high-speed digital readings, response time at PASS/FAIL decision 0.3 second Drop proof onto concrete from 1m (3.28 feet) Bright LED luminous LCD, Test lead with bright LED lamp to illuminate near hand (Option L9788-11 or L9788-10) Continuity check via 200 mA testing Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles DC voltage measurement 4.2V (0.001V resolution) to 600V (1V resolution), 4 ranges, Accuracy: ±1.3% rdg. ±4 dgt., Input resistance: 100 kO or higher AC voltage measurement 420V (0.1V resolution) / 600V (1V resolution), 2 ranges, 50/60 Hz, Accuracy: ±2.3% rdg. ±8 dgt., Input resistance: 100 kO or higher, Average rectifier Low resistance measurement For checking the continuity of ground wiring, 10 O (0.01 O resolution) to 1000 O (1 O resolution), 3 ranges, Basic accuracy: ±3 % rdg. ±2 dgt., testing current 200 mA or more (at 6 O or less) Display Semi-transmissive FSTN LCD with back lighting, bar-graph indicator Response time Approx. 0.3 second for PASS/FAIL decision (at HIOKIs conditions) Other functions Indicate MO measurement value after a lapse of one minute, Live circuit indicator, Automatic electric discharge, Automatic DC/AC detection, Comparator, Drop proof, Auto power save Power supply LR6 (AA) alkaline batteries × 4 Continuous use: 20 hours (at HIOKI’s conditions) Number of measurements: 1000 times (at 5 s ON, 25 s OFF cycle, insulation measure of lower limit resistance value to maintain nominal output voltage) Dimensions, mass 159 mm (6.26 in) W × 177 mm (6.97 in) H× 53 mm (2.09 in) D, 640 g (22.6 oz) (including batteries, excluding test leads) > Each Unit Includes Test Lead Neck strap Instruction Manual 4 LR6 (AA) alkaline batteries

Hioki insulation testers or megohmmeters feature all-in-one designs including built-in rugged cases and test lead storage compartments. The IR4058 is a 5-range, 50V to 1000V digital insulation resistance tester with bargraph, and delivers efficient functions and features to help shorten work time associated with field insulation testing. CAT III 600 V Measured values held on the display are sent immediately to a smartphone or tablet via Bluetooth® Smart technology (IR4058) 5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ Digital bar graph Stable & high-speed digital readings, 0.3 second response time for PASS/ FAIL decisions Drop proof onto concrete from 1m (3.28 feet) Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Option L9788-11 or L9788-10) Continuity check via 200 mA testing Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles > Each Unit Includes Test Lead Neck Strap Instruction Manual 4 Alkaline Batteries

The SM-8200 Digital Super Megohmmeter series are insulation resistance meters consisting of a constant voltage power supply and a high sensitivity current measuring element, and are designed to measure the electrical resistance of insulation materials with high insulating properties. Ultra megohm measurement Digital/analog display on LCD Compatible for measurement of several sample types with electrodes & other devices

Up to 1000V, 210^13 ohms The SM-8200 Digital Super Megohmmeter series are insulation resistance meters consisting of a constant voltage power supply and a high sensitivity current measuring element, and are designed to measure the electrical resistance of insulation materials with high insulating properties. Ultra megohm measurement Digital/analog display on LCD Compatible for measurement of several sample types with electrodes & other devices

Measurement voltage : 10 1,000 V DC (7ranges) Meas. range : 0.05 2 x 1010 MO (9ranges) Digital/analogue display on LCD Suited for measurement site of high to low voltage and resistive load Equipped with imer, remote starter, comparator and HV-EN function (standard spec) Compatible for measurement of several sample typees with electrodes and other devices

The Hioki SM Series Super Megohm Meters are high resistance and ultra low current inspection devices with a 0.1 fA resolution to offer precise testing on production lines. The SM7110 is designed for use in evaluating and testing the performance of electronic components used in products such as smartphones and hybrid vehicles, and supports measurement voltage output of up to 1000 V. 300 times better noise resistance Max. 1000 V output : SM7110 Max. 2 × 10^19 Ω display Min. 0.1 fA resolution Built-in EXT I/O, RS-232C, GP-IB and USB > Each Unit Includes Power cord Instruction manual CD-R (Communications command instruction manual, USB driver) EXT I/O male connector Short plug