Megohmmeters and Insulation Testers

Save over $735 with the Megger MIT525 VIP Kit Limited Time Offer FREE Megger MIT410/2 Smaller size and lighter weight allows easier transport and use without compromising performance. High measurement range enables installation testing and long-term trending of higher value apparatus. Unique dual case design allows for fire-retardant protection while maintaining ruggedness. High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy. Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability. Operate from line power when battery fully discharged (charges while operating). Two and one-half hour full battery charge time (one half hour charge for one hour testing) significantly increases productivity. Up to six hours continuous testing (5 kV) on a single battery charge. Industry best guard terminal performance to insure highest accuracy of measured values. Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures. Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages. CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications. Large LCD with automatic backlight. Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments. High altitude operation up to 3000 m while maintaining CATIV 600 V rating. Rotary switch operation for easy, intuitive field use. Field replaceable battery > Each Unit Includes FREE MIT410/2 User guide CD Power lead 10 ft (3 m) leadset x 3, medium insulated clips

Megger Model # MJ159 Catalog # 212159 Test Voltages: 100, 250, 500, 1000 VDC Insulation Resistance: 0 to 2000 MW 0-600V AC Measuring Range Direct-Reading Analog Meter—No Multipliers Hand-Crank Operation 7 x 6 x 5 HWD/4.5 lbs > Each Unit Includes Test Leads (210971) Carrying Case 217740) Instructions

Megger Model # MJ359 Catalog # 212359 Test Voltages: 100, 250, 500, 1000 VDC Insulation Resistance: 0 to 2000 Megohms 0-600V AC Measuring Range Direct-Reading Analog Meter—No Multipliers Line or Hand-Crank Operation 7 x 6 x 5 HWD/4.5 lbs > Each Unit Includes Test Leads (210971) Carrying Case (217740) Instructions

Simple manual or automatic testing 120 V 60 Hz operation User-selectable PASS/FAIL limits Fast testing test times selectable from 1 s Ground bond testing at 25 A, 10 A and 200 mA Differential, touch and substitute ground leakage testing Tests power cords Full color QVGA display > Each Unit Includes Carry case Continuity/earth bond lead Storage/carry case w/ lead and document pouch Extension Lead Adaptor (ELA) 120V US

Operators of electric tools and other electrical equipment must be protected from potentially dangerous flaws in workmanship or wear and tear. The PAT450 is designed to test portable electrical equipment for safe operation. The PAT450 offers sufficient memory for the test results of 10,000 assets with the proven long duty cycle, testing simplicity and speed of the PAT300 series. Offers 1.5 kV and 3.0 kV flash testing and bond testing at three currents, 200 mA, 10 A and 25 A Large bright color screen for clear test results and simple navigation through the menus. Menus have been simplified to make operation faster and more intuitive. Five soft-keys give direct access to frequently used functions making navigation through the menus even faster and the tester even more productive, offering a greater return on investment.

Certified to EN61010-1 to 600V, Category III for safety Self-contained AC current measurement up to 10 Amps Overload protection available > Each Unit Includes Test Lead Set with Retractable Banana Jacks Carrying Case

The Simpson TS-113 Volt-Ohm-Milliammeter Railroad Test Set is a rugged, reliable instrument that has been designed for use by trained and qualified technicians associated with the Railroad Signaling and Communications Field. In construction and general principle, it follows closely the proven Simpson pattern based on experience of many years of successful multimeter manufacture. AC current transformer facilitates minimal voltage drop On time measurement at any rate in excess of 30 pulses per minute An adjustable Pointer Stop for observation of peak reading stabilization A current-limiting diode prevents overload damage > Each Unit Includes Black padded nylon Carrying Case Test Lead Set

The MIC-05s1 is a portable, rugged, easy-to-use, 5 kV class insulation test meter. Measurement to 20 TΩ User-selectable test voltage any from 50 to 1,000 V (with 10 V resolution) and 1,000 to 5,000 V (with 25 V resolution) Continuous indication of measured insulation resistance or leakage current Audio beeps every five-second periods to indicate measurement progress Indication of actual test voltage during measurement 1.2 mA, 3 mA and 5 mA test current Step voltage and ramp voltage insulation resistance measurements (SV) (RV) Selectable test times (T1, T2 , T3 from 1 to 600 seconds) to measure one or two absorption coefficients Adjustable measuring time to 99 59’ Polarization index (PI) and dielectric absorption ratio (DAR) measurements Dielectric Discharge calculation (DD) High-noise immunity, digital filters function for measurements in high noise environment (10 s, 30 s , 60 s) Adjustable limits for measured resistance RISO Measurement of capacitance during the measurement of RISO DC and AC voltage measurement in the range of 0 to 600 V Meter conforms to EN 61557 > Safety First Features: CAT-IV 600V, CAT-III 1000V Automatic discharge of tested object after the insulation resistance measurement completes to remove high voltage charge remaining due to cable capacitance Protection against measuring live objects, measurement will not proceed Measurements with test leads up to 65 ft / 20 m length > Construction: Backlit keyboard and graphical display Rugged IP 54 case protected from water spray from any direction > Power Supply: Bult-in battery pack, low battery warning indicator, built-in fast charger AC power: 90 V to 260 V, 50 Hz / 60 HzGraphical display > Memory: 990 cells of memory (11,880 records) to save test results Wireless data transmission to a PC with Bluetooth®, or via USB cable