Megohmmeters and Insulation Testers

The Megger MIT410-TC2 insulation resistance and continuity tester has been designed specifically for use within the telecommunications industry. Unique telecommunications-related features include a soft canvas carrying bag with shoulder strap and rugged snap hook to attach to a tool belt, and a bed of nails test lead set. Insulation testing up to 1000 V and 200 G-ohms Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 mA or 20 mA down to 0.01 Pass/Fail limit alarms PI/DAR and Timer function Three year product warranty IP54 rated > Each Unit Includes Soft case Bed of Nails Lead Set Quick Start Guide Certificate of Calibration User Guide

The Megger MIT410 Insulation and Continuity Tester with PI, DAR and switch probe has been designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirements MIT410/2: 50 V, 100 V, 250 V, 500 V and 1000 V Polarisation Index, Dielectric Absorption Ratio The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options. Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating. Insulation testing up to 1000V Patented analog arc and dual digital display CAT IX 600 V Rating 10 V to 100 V Variable Voltage test in 1 V increments TRMS and DC Voltage measurement Continuity testing at 200 mA or 20 mA down to 0.01 Pass/Fail limit alarms PI/DAR and Timer function User selectable test voltage in 1V increments from 10V to 100V Three year product warranty IP54 rated > Each Unit Includes Red/Black Silicone test leads with Probes Clips SP5 remote switch probe (not MIT400/2) Owners information CD Batteries 6 x AA Alkaline Hard carry case

MIT420/2: 50 V, 100 V, 250 V, 500 V and 1000 V Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges. Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options. Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating. Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilized insulation test voltage Single range, faster continuity testing from 0.01 Ω to 1 MΩ 600 V Trms AC and DC voltage measurement Live circuit detection and protection User variable insulation test voltage from 100V to 1000V On board test result storage CAT IV 600 V & IP54 > Each Unit Includes Red/Black Silicone test leads with Probes Clips SP5 remote switch probe (not MIT400/2) Owners information CD Batteries 6 x AA Alkaline Hard carry case

MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download. The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges. Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options. Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating. Designed for Electrical and Industrial testing Insulation testing from 50 to 1000 V 2% test voltage accuracy Stabilized insulation test voltage Polarization Index (PI) and Dielectric Absorption Ratio (DAR) functions True RMS voltage measurement to 600 V ac or dc with resolution from 0.1 mV Single range, faster continuity testing from 0.01 Ω to 1 MΩ Frequency measurement from 15 to 450 Hz Capacitance measurement from 1 nF to 10 μF Automatically test to a time limit Stores over 1000 test results with onboard storage CAT IV 600 V / CAT III 1000 V IP54 rated providing a weatherproof case to reduce the chances of water ingress Live circuit detection and protection Auto reverse polarity PASS/FAIL indication on limit alarms > Each Unit Includes Red/Black Silicone test leads with Probes Clips SP5 remote switch probe (not MIT400/2) Owners information CD Batteries 6 x AA Alkaline Hard carry case

CAT IV 600 V Rated Adjustable insulation test voltages – provides 250 V to 1000 V or 50 V to 1000 V. A special applications instrument (Model MIT40X) offers test voltages from 10 V to 100 V in 1 V steps. Dual digital display readout Exceptional measurement range from 20 GΩ to 200 GΩ Digital and analog arc display Adjustable continuity limit alarm Automatically performs PI and DAR tests True RMS voltage measurement Results storage and wireless Bluetooth download Three year warranty

MIT485/2 Analog/DigitalInsulation Tester Premium/Telecom: 50/100/250/500/1000V 600 V catIV Result Storage Download Insulation testing up to 500 V and 100 GΩ range in a hand held instrument 3 wire connection for A, B and E (Tip, Ring and Earth) connection (New) Gated access to 500 V to prevent accidental damage (New) Rechargeable options for mains and car charging (New) Single range, faster continuity testing from 0.01Ω to 1 MΩ (New) Differential measurement capability (New) Stabilised insulation test voltage (New) 600 V Trms AC and DC voltage measurement Test result storage and Bluetooth ® downloading CAT IV 600 V and IP 54

The Megger MIT515-US insulation resistance tester measures insulation resistance, voltage, current, and capacitance in high-voltage electrical systems. This multiranging digital meter performs timed insulation resistance (IR), polarization index (PI), and dielectric absorption ratio (DAR) tests. Smaller size and lighter weight allows easier transport and use without compromising performance. High measurement range enables installation testing and long-term trending of higher value apparatus. Unique dual case design allows for fire-retardant protection while maintaining ruggedness. High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy. Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability. Operate from line power when battery fully discharged (charges while operating). Two and one-half hour full battery charge time (one half hour charge for one hour testing) significantly increases productivity. Up to six hours continuous testing (5 kV) on a single battery charge. Industry best guard terminal performance to insure highest accuracy of measured values. Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures. Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages. CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications. Large LCD with automatic backlight. Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments. High altitude operation up to 3000 m while maintaining CATIV 600 V rating. Rotary switch operation for easy, intuitive field use. Field replaceable battery > Each Unit Includes User guide CD Power lead 10 ft (3 m) leadset x 3, medium insulated clips

These instruments are designed based on Meggers extensive knowledge of insulation testing (100 years of experience) and significant feedback from actual end users. Megger has taken the best insulation testers in the world and improved them to add functionality, make them easier to use and easier to transport. They include Meggers patented digital/analog display (real-time pointer movement), a CATIV safety rating at all terminals and a unique dual case design. Smaller size and lighter weight allows easier transport and use without compromising performance. High measurement range enables installation testing and long-term trending of higher value apparatus. Unique dual case design allows for fire-retardant protection while maintaining ruggedness. High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy. Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability. Operate from line power when battery fully discharged (charges while operating). Two and one-half hour full battery charge time (one half hour charge for one hour testing) significantly increases productivity. Up to six hours continuous testing (5 kV) on a single battery charge. Industry best guard terminal performance to insure highest accuracy of measured values. Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures. Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages. CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications. Large LCD with automatic backlight. Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments. High altitude operation up to 3000 m while maintaining CATIV 600 V rating. Rotary switch operation for easy, intuitive field use. Field replaceable battery > Each Unit Includes User guide CD Power lead 10 ft (3 m) leadset x 3, medium insulated clips