Megger MIT2500

Description

The MIT2500 insulation and continuity tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed.

The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be “dialed in”. This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test.

• Designed for Motor and Cable Testing, Specialist Applications and Electrical Testing Markets
• Insulation Testing to 2.50 Kv (New)
• 200 GΩ Measurement Range at ≥ 1.00kv
• Guard Terminal for Testing of Equipment With High Surface Leakage Issues
• Stabilized Insulation Test Voltage to -0% 2% ±2V
• Variable Insulation Test Voltage from 50V to 999 V in 1V Steps
• Variable Insulation Test Voltage from 1.00 Kv to 2.50kv in 10V Steps
• Single Range, Fast Continuity Testing from 0.01Ω to 1MΩ
• 0.01mv to 600V TRMS AC and DC Voltage Measurement
• Test Result Storage and Bluetooth® Downloading
• Live Circuit Detection and Protection
• CATIV 600V Applications & IP54 Environmental Protection
• Rechargeable Options for Mains and Car Charging

>

Each Unit Includes

• Red/Black/Blue 1 kV silicone test leads with probes and clips 1007-781
• Red/Black/Blue 2.50 kV silicone test leads with clips 1007-637
• Owners Information CD download at www.megger.com
• Batteries 6 x AA Alkaline 1002-753
• Hard carry case 2006-649
• Download manager software