High Voltage

Up to 380V test Voltage. Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation. Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse Implantable Test 1, allowing historical documentation of original machine performance. Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity. Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors. 1-year calibration cycle. All resistor networks included internally. Test leads included. 1 year warranty

Up to 270V test Voltage. Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation. Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse Implantable Test 2, allowing historical documentation of original machine performance. Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity. Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors. 1-year calibration cycle. All resistor networks included internally. Test leads included. 1 year warranty

MegaPulse Antenna Surge Tester PF 65, 10kV pulse derived from a 1nF capacitor, including the 4M ohm load resistor required by IEC 60065. Designed specifically for testing to IEC 60065 Fig. 7, IEC 60950 Annex N and IEC 62368-1 Annex D. The IEC 60065, Fig. 7a, switch S is our IER design, designed and built in compliance with IEC 60065, Fig. 7b. External interlock is supplied as standard equipment. Optional TestMinder PF computer control allows the 50 cycle test program to be conducted. Optional 1000:1 Oscilloscope output (reference only) The Antenna Surge PF generates the waveform required by IEC 60065, 60950 and 62368-1 to test antenna ports at 10kV output voltage. The MegaPulse Antenna Surge PF is configured with our IER relay and is built in a 19 by 6U enclosure. Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse, allowing easy sanity checks and proof to visiting agency engineers of test setups. 1000:1 BNC Oscilloscope output option allows quick connections and easy evaluation of output waveforms. (Reference only). Requirements are for positive polarity tests only. No reverse polarity waveforms are available from the MegaPulse Antenna Surge PF. Front panel voltage meter shows residual voltage in charging circuit for safer operation.

Complies with OSHA regulations for hot stick testing(1910.269) Dual range selector gives the operator the actual leakage values down to micro-amps Portable tester is lightweight and powered by standard 115VAC High voltage applied simulates either 75,000 volts/ ft for ‘wet’ testing or 100,000 volts/ ft for ‘dry’ testing Any fiberglass tool not meeting the required leakage values should be removed from service and examined more thoroughly to determine the cause of the leakage and its suitability for service Should any of the tools tested not meet the required leakage values of the Hot Stick Tester, restoration to acceptable leakage values is possible by using the proper cleaning aids and products

HASTINGS Live Tester is a technological breakthrough in non-contact voltage detectors. Static Discriminator technology exclusive in Live Tester provides more reliable detection on low voltage ranges, and now means no more false alarms. Live Tester is ready for hot stick use with the all in one universal attachment and shotgun adapter handle. Electronic Touchpad includes 11 range settings from 240v to 230KV and 2 URD settings 15KV and 25KV. Requires (3) C Cell Batteries included. Electronic Touch Pad Control Built-In Self Test Function High Quality Beeper Water Resistant Design Auto Power Off Operator Feedback – both Visual and Audible Low Battery Indication Weighs less than 1 pound > Each Unit Includes (3) C Cell Batteries included.

Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. These testers may be used with rubber insulating gloves or hot sticks. Testers indicate voltage with an extra bright LED light and audible signal.

In applications where its hard to see the analog neon scale, a backlight digital LCD screen can make a huge difference. One auto-ranging model covers both AC and DC testing of voltage up to 50kV. Check voltage in fuses, test for correct phase connections, or for absences of high voltage on de-energized lines or equipment. Just add the hot sticks (Hoyt HS-120/HS-175 Series) for a complete IP66 rated solution. Range/Accuracy AC: 0-4.000kV /± (2.5% Reading 0.1kV) 4.000kV-50.0kV / ± (2.5% Reading 2 Digits) > Range/Accuracy DC: 0-20.00kV / ± (2% Reading 0.08kV) 20.00kV-50.0kV / ± (3% Reading 0.1kV) > > Each Unit Includes Rugged ABS Plastic Carrying Case Two Y Contact Probes, Hook Probes Insulated Holding Rods Six Foot Interconnect Cable AA Batteries Manual

These phasing sticks are used to determine if two conductors are in-phase or out-of–phase. Measure phase to phase, compare between phases, or test phase to earth. dual neon scale that indicates % and VAC Range (System, Full Scale, Max): 11kV/12kV/15kV Length: 4.6 ft Weight: 3.8 lbs Operating Temperature: -25°C to 50°C (-13°F to 122°F) > Each Unit Includes Two factory test reports to IEC specs (100kV for one minute) ABS Carrying Case Two Year Warranty Manual