Showing 1–9 of 212 results
-
$48
This multimeter is designed for safety: IEC61010 600V CAT IV. The Multimeter Model 5231 provides a Volt, Ohm, Continuity, Diode function, as well as an AC voltmeter function with low input impedance that is capable of finding ghost voltages by adding a burden to the circuit. It performs AC/DC direct reading current measurements up to 600A with a current clamp accessory plugged in. The rotary function switch provides two OFF positions (OFF and OFF NCV). While in the OFF NCV position, the display will turn red if placed close to a live cable, providing a safe and easy way to detect hot wires. This meter has a high sensitivity with a resolution of 0.01mV and can withstand overloads up to 8000V. The Model 5231 is ideal for electrical installers, electricians and heating or air-conditioning specialists. Non-electrical contact detection of network voltage (NCV Function) High sensitivity with a resolution of 0.01mV AC voltmeter with low input impedance (voltage measurements for electricity and electrical engineering) AC/DC voltmeter with high input impedance (voltage measurements for electronics) Ohmmeter, Continuity test with buzzer and Diode test functions Ammeter (measurement using current clamp-on current probes) Withstands overloads up to 8000V VLowZ function detects the presence of ghost voltage by placing a burden on the circuit Multi-position mounting for a hands-free work environment Recommended current probes AEMC Models MN03, MN251 & SR651 IEC/EN 61010-1, 1000V CAT III, 600V CAT IV > Each Unit Includes Soft Carrying Case Set of two 5 ft color-coded test leads User Manual
-
$55
Non-electrical contact detection of network voltage (NCV Function) High sensitivity with a resolution of .1mV AC voltmeter with low input impedance (voltage measurements for electricity and electrical engineering) AC/DC voltmeter with high input impedance (voltage measurements for electronics) Ohmmeter, Continuity test with buzzer, Diode test and Capacitance functions Frequency and Duty Cycle measurements Withstands overloads up to 8V VLowZ function detects the presence of ghost voltage by placing a burden on the circuit Multi-position mounting for a hands-free work environment IEC/EN 611-1, 1V CAT III, 6V CAT IV > Each Unit Includes 2 5 ft. color coded test leads Soft Carrying Case User Manual
-
$44
The 15XP-B is the right choice for electronics engineers technicians and field service Autoranging display for faster measurements TTL logic test for digital circuits Integrated tilt stand for easy bench use Diode test for component level troubleshooting Data hold freezes display to hold measurement reading 600V AC / 600V DC—highest voltage rating in this size of meter Special 2000 MΩ measurement range
-
$49
Non-contact voltage detector Separate door for easy battery and fuse access Manual ranging, display: 3-1/2 digit LCD, 1999 counts Display update rate: 2.5/sec, nominal Power battery: 9 V NEDA 1604, JIS 006P, IEC 6F22 Operating temperature: 0 °C to 45 °C at <, 70 % R.H. Storage temperature: -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter Low battery indication Overrange indication Min/max and data Hold
-
$69
Min/max, relative, peak and data hold Auto power off to save battery life Separate door for easy battery and fuse access Magne-Grip™ Holster with magnetic hanging strap Display: 3-3/4 digit LCD, 3999 counts with 41-segment analog bar graph Display update rate: 2/sec, nominal Analog bar graph Overrange indication Operating temperature: 0 °C to 45 °C at <, 70 % R.H. Storage temperature: -20 °C to 60 °C Input warning tone when test leads are in wrong jack
-
$78
Autoranging, display: 3-3/4 digit LCD, 3999 counts with 41-segment analog bar graph Display update rate: 2/sec, nominal Operating temperature: 0 °C to 45 °C at <, 70 % R.H True-rms digital multimeter with temperature and backlight Overrange indication Auto power off to save battery life Min/max, data hold and range lock Separate door for easy battery and fuse access Magne-Grip™ Holster with magnetic hanging strap
-
$64
Temperature measurement capability to 1000 °C/1832 °F (type-K thermocouple included) 600 V AC/600 V DC highest voltage rating in this class of meter Capacitance for motor run/start test 0.1 _A resolution for flame sensor testing Frequency to 1 MHz Resistance to 40 MΩ Data hold freezes display Magne-Grip™ Holster VolTect™ non-contact voltage detector Low battery indication
-
$94
Backlight, True-rms with component and logic test Inductance to 40 H, frequency to 40 MHz, capacitance to 400 _F, logic to 20 MHz Input warning tone when test leads are in wrong jack 10 Amps AC/DC, fully safety fused Continuity beeper Min/max, average, relative, peak, and data hold Auto power off to save battery life Separate door for easy battery and fuse access Magne-Grip™ Holster with magnetic hanging strap Autoranging, display: 4-3/4 digit LCD, 10,000 counts with 41-segment analog bar graph Display Update Rate: 2/sec, nominal Power Battery: 9 V NEDA 1604, JIS 006P, IEC 6F22 Operating temperature: 0 °C to 45 °C at <, 70 % R.H
-
$103
Backlight, True-rms with with optical PC interface Frequency to 10 MHz,capacitance to 400 uF, temperature to 2372 °F Bright blue backlight 10 Amps AC/DC, fully safety fused Continuity beeper Min/max, average, relative, peak, and data hold Auto power off to save battery life Separate door for easy battery and fuse access Magne-Grip™ Holster with magnetic hanging strap Autoranging, display: 4-3/4 digit LCD, 10,000 counts with 41-segment analog bar graph Display update rate: 2/sec, nominal Power battery: 9 V NEDA 1604, JIS 006P, IEC 6F22 Operating temperature: 0 °C to 45 °C at <, 70 % R.H Input lead warning
