Gages

With extension rod/with TiN-coated contact points TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole (up to 100mm/4models) Large LCD readout Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm With Ratchet Stop for constant force Range .8-2in 20.32-50.8mm Indv Range .8-1 in,1-1.2 in, 1.2-1.6 in,1.6-2 in Setting Rings Incl. 1 in DIA.,1.6 in DIA Resolution: 0.001mm or .00005/0.001mm (over 5 models: .0001/0.001mm) Contact point:TiN-coating Measuring method: Three-point method Display: LCD Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 8 months under normal use > Each Unit Includes Fitted plastic case

TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole (up to 100mm/4models) Large LCD readout Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm With Ratchet Stop for constant force Resolution: 0.001mm or .00005/0.001mm (over 5 models: .0001/0.001mm) Contact point:TiN-coating Measuring method: Three-point method Display: LCD Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 8 months under normal use Range 2-4in 50.8-101.6mm Indv Range 2-2.5 in,2.5-3 in,3-3.5 in,3.5-4 in Setting Rings Incl. 2.5 in DIA.,3.5 in DIA > Each Unit Includes Fitted plastic case

TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole (up to 100mm/4models) Large LCD readout Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm With Ratchet Stop for constant force Resolution: 0.001mm or .00005/0.001mm (over 5 models: .0001/0.001mm) Contact point:TiN-coating Measuring method: Three-point method Display: LCD Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 8 months under normal use Range 4-8in 101.6-203.2mm Indv Range 4-5 in,5-6 in,6-7 in,7-8 in Setting Rings Incl. 5 in DIA., 7 in DIA With extension rod/with TiN-coated contact points > Each Unit Includes Wooden Case

Measurement range is 0.275 to 0.5 and 6.925 to 12.7 mm, precise to 0.00005 or 0.001 mm, and accurate to or 0.0001 TiN-coated measuring contact points for durability and impact resistance Contact point geometry allows the instrument to measure to the bottom of blind holes Easy-to-read LCD for convenient recording of measurement with useful functions, including presetting, zero/ABS, data hold, and battery replacement alarm Set includes three complete display units, two setting rings, and fitted wooden case

Measurement range is 0.5 to 1.0 and 12.7 to 25.4 mm, precise to 0.00005 or 0.001 mm, and accurate to or 0.00015 TiN-coated measuring contact points for durability and impact resistance Contact point geometry allows the instrument to measure to the bottom of blind holes Easy-to-read LCD for convenient recording of measurement with useful functions, including presetting, zero/ABS, data hold, and battery replacement alarm Set includes three complete display units, two setting rings, and fitted wooden case

The minimum value holding function provides the easy detection of hole diameter Up to three sets of master value and upper/lower tolerance value can be memorized An analog bar indicator is integrated to enhance the intuition in reading GO/±NG judgment is performed by setting the upper and lower tolerances Up to four rods (250mm or 500mm) can be used Accuracy: Wide Range: 0.003mm / .00012” Narrow Range: 0.002mm / .00008” Resolution: .00005 / 0.001mm Display: LCD Battery: SR44 (1 pc.) (938882) Battery life: Approx. 9 months for normal use Dust/Water protection level: Conforming to IP53 Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only), Data output, GO/±NG tolerance judgment Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error Range 1.8-4in 45-100mm Probe 6 in 152.4mm

The minimum value holding function provides the easy detection of hole diameter. Up to three sets of master value and upper/lower tolerance value can be memorized. An analog bar indicator is integrated to enhance the intuition in reading. GO/±NG judgment is performed by setting the upper and lower tolerances. Up to four rods (250mm or 500mm) can be used.

Interchangeable anvil is attached to a micrometer head for accurate dimensional setting. Wide measuring range with sub-anvils. Carbide ball contact point for durability. Extension rods (optional) can be attached for measuring deep holes. Range 24-32in Head Travel 2in Sub Anvil 2in,4in With 2923SB-10 Grad .0001in