Showing 55–63 of 1343 results
-
$133
The Clamp-on Meter Model 67 is a general purpose professional clamp-on meter that measures up to the toughest standards. This meter offers a complete set of measurement ranges (AC Amps, AC Volts, DC Volts, Ohms, Continuity with beeper, Frequency from V or A, and Temperature) and is in compliance with international safety and quality standards to ensure professional and reliable measuring tools. Standard size, full function clamp-on meter 1AAC current measurements 14VDC volt measurements TRMS measurements Frequency measurements from V and A 1ms Peak function for fast capture of signals Hold function to freeze readings Designed to measure Amps and Volts at the same time Push-button for easy ADC zeroing Large easy-to-read 9999-count backlit display Includes test leads and soft carrying case
-
$166
Standard size, full function clamp-on meter 1AAC/DC current measurements 14VDC volt measurements TRMS measurements Resistance measurement to 1,Ω Continuity with beeper below 35Ω Frequency measurements from V and A 1ms Peak function for fast capture of signals Hold function to “freeze” readings Designed to measure Amps and Volts at the same time Push-button for easy ADC zeroing Large easy-to-read 9999-count backlit display > Each Unit Includes Test Leads Soft Carrying Case
-
$555
11 range scales indicating cable faults and terminations up to 19,000 ft (6000m) in feet or meters Detects opens, shorts, taps, faulty taps, bridge taps, splitters, high resistance, wet cables, splices and more Identifies impedance mismatches Works with twisted pair, parallel and coaxial cable Selectable cable impedance (25ohms, 50ohms, 75ohms, 100ohms) Over-voltage protection up to 250V Adjustable cursor assists in locating faults and termination Built-in tone generator for tracing and locating cables Large high-visibility blue electroluminescent backlit display
-
$247
Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires Unique graphical and digital display of fault information and length Indicates distances to opens and shorts and identifies locations Built-in tone generator for tracing and locating cables Built-in service check function to detect telephone, 10BaseT, 100Mbit and token ring Visual and audible warning of live telephone network voltages Works with all Category 6 cables Large high-visibility blue electrolumiscent backlit display Active remote identifiers indicate Pass/Fail at remote end Up to 16 unique remote identifiers available Works with TIA 568A/B, USOC and ISDN wiring schemes CE Mark > Each Unit Includes CA7028 Meter Remote ID Two patch cords Four 1.5V AA Batteries User Manual Soft Carrying Case
-
$105
10,000-count LCD display Excellent Resolution 100A AC/DC Ammeter with low 10A Range (1mA Resolution) Tapered Jaws for crowded wiring or areas (.45-12mm Jaw Opening) 600V AC/DC Voltmeter Analog Output in AAC/DC Auto-Ranging & ADC Zero Push-button Data HOLD & PEAK Functions Relative Function to Compare Two Measurements Ohm Range & Continuity Test with Beeper, 600V Protection Batteries: AUTO-OFF and Low Battery Indicator IEC/EN 61010 Safety Rated and CE Mark > Each Unit Includes Lead Set (Red & Black lead) with Needle Point Test Probes Carrying Case AAA Batteries User Manual
-
$296
Each Kit Includes 5217 Digital Multimeter 400D-10 Current Meter with 10 Flexible Sensor NC-1 Non-Contact Voltage Detector 6527 1kV Megohmmeter Tool Bag Reversible Pocket Screwdriver > This kit provides all the essential tools to measure all typical electrical parameters as well as check the insulation of cables and equipment. It includes a digital multimeter, insulation tester, line splitter and flexible current sensor 5217 Digital Multimeter 5217 TRMS, 6000-cts, NCV, V, A, AC/DC, Ohm, T, Frequency, Auto Hold True RMS (TRMS) Non-Contact Voltage detection Low input impedance voltage measurement (VLowZ) to help prevent ghost voltage from affecting the measurement HOLD function MAX/MIN function displays the maximum and minimum readings detected during a measurement session Δ REL compares measurements to a user selected reference value. Auto/Manual range selection Backlight and flashlight Multiple mounting options (stand, slot, magnet) Sleep Mode for extending battery life > 400D-10 Current Meter with 10 Flexible Sensor Digital FlexProbe with 10 sensor Easy access and measurement, even in confined spaces where access is difficult Measurement from 20mAAC to 4000A (model dependent) Resolution down to 1mA (model dependent) Auto-ranging HOLD feature Direct reading Compact and simple to use Flexible current sensor True RMS Safety rating of 600V CAT IV Sensor diameter 1.77 to >, 3.94 (sensor dependent) > NC-1 Non-Contact Voltage Detector Voltage Sensitivity: 100 to 240VAC Frequency: 50/60Hz Detection Distance: <,5mm Over Voltage: 600V Cat. III Battery: 21.5V AAA Safety: For indoor use and in accordance with overvoltage 600V Cat. III, Pollution Degree 2 > 6527 1kV Megohmmeter True Megohmmeter® Insulation test voltage selections of 250V, 500V and 1000V Measure insulation to 4000MΩ (4GΩ) TEST LOCK feature for timed measurements up to 15 minutes Auto discharge after insulation test AC/DC voltmeter to 600VAC/1000VDC Ohmmeter to 400kΩ Continuity meter with up to 200mA test current Test lead resistance compensation for accurate low resistance measurements Auto HOLD function to freeze readings Large and bright dual display with blue backlight Auto Power Off Ergonomic over-molded case with back-stand Complies with International Insulation Testing Standards including EN61557 CE marked and 600V CAT IV >
-
$263
Motor Test Kit (Low Voltage) includes: 6609: Phase and Motor Rotation Meter: The Phase Rotation Meter Model 6609 is a compact and rugged meter designed to identify phase rotation on 3-Phase systems and identify live and open/de-energized phases. Ideal for installing rotating machinery or motors, and for checking generator output. The Model 6609 is also an ideal tool for measuring the proper rotation of motors, conveyors, pumps and other electrical devices interconnected on the power line system before installation where direction of rotation is dependent on proper phase hook-up. 6527: Digital Megohmmeter, 4G Ohm, 250V/500V/1000V: The Model 6527 is a portable multi-range True Megohmmeter capable of measuring insulation resistance from 1kΩ to 4000MΩ. It has three user selectable test voltages of 250V, 500V and 1000V. The Model 6527 is also a multimeter that features an AC/DC voltmeter function capable of measuring up to 600VAC and 1000VDC, continuity test function with audible beeper for resistances under 35Ω, and an overload protection of 600Vrms. In addition, it can measure resistance up to 400kΩ. The TEST button has an associated locking feature for continuous tests up to 15 minutes, eliminating the need to manually hold down the button. This lightweight, easy-to-use megohmmeter can be used for most commonly performed insulation tests, such as on cables, switch gears, motors, DC generators, power tools and small appliances. 203: Clamp On Meter: The True RMS Clamp-On Meter Model 203 is safety rated at 600V CAT IV. It measures AC DC volts and amps, frequency, continuity, resistance, and temperature (with the supplied K thermocouple probe). The Model 203 can also perform diode checks. Its Adapter mode displays external sensor inputs. The Delta relative function compares new measurements to a reference value, and the MIN/MAX function tracks high and low values. This compact and rugged meter can operate in the most demanding work environments, and its IP40 rating allows it to withstand both dust and water spray. Small Tool Bag: Dimensions: 13.0 x 9.8 x 9.5
-
$551
Motor Test Kit {Medium Voltage} includes: 6524: Multifunction Insulation Resistance Tester, 1000V True Megohmmeter 1 kV Insulation and Multi-Function Tester (Resistance, Continuity, Frequency and Voltage) 50V, 100V, 250V, 500V and 1000V Insulation Test Voltages 200GΩ Max Insulation Resistance DAR and PI ratios calculated Timed Test Mode up to 40 minutes for Insulation Resistance Test Test Lock feature for hands free timed measurements up to 15 minutes Continuity tests at 20mA or 200mA Test lead resistance compensation for accurate low resistance measurements True RMS AC/DC Voltmeter up to 700V Ohmmeter to 1000kΩ Frequency measurements from 15 to 800Hz Auto discharge after Insulation Test Hold function to freeze readings Large and bright dual display with blue backlight Auto Standby Feature due to inactivity saves battery power 300 Measurement storage in memory Optional Remote Probe accessory > 6610: Phase Rotation Meter: The Phase Rotation Meter Model 6610 is an essential tool for any installation, inspection and maintenance facility. The Model 6610 is a phase meter with voltage sensing detector clips (no metal contact points) designed to identify phase rotation on 3-phase systems and identify live and open/de-energized phases. The phase order is determined as soon as the leads are connected. The presence of live wires and phase sequence are provided by LED indication and buzzer as soon as detection has occurred. The Model 6610 is ideal for installing rotating machinery or motors, and for checking generator phase rotation direction. 205: Power Clamp-on Meter, 1000VAC/DC: The True RMS Clamp-On Meter Model 205 is safety rated at 600V CAT IV. It measures AC DC volts and amps, frequency, continuity, resistance, power and Power Factor, phase rotation, and THD. It can also perform diode checks. The Delta relative function compares new measurements to a reference value, and the MIN/MAX function tracks high and low values. The Model 205 also tracks peak and peak- values. This compact and rugged meter can operate in the most demanding work environments, and its IP40 rating allows it to withstand both dust and water spray. Large Tool Bag: Dimensions: 18 x 9 x 12
-
$1.846
The Digital/Analog Megohmmeter Model 5060 is the latest design in 5000V insulation testers. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD). The True Megohmmeter® Model 5060 displays the test voltage, insulation resistance and the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads are displayed at the conclusion of the test. This meter is designed with the highest level of built in safety features. The Model 5060 can be operated from an internal rechargeable battery or from AC line power. An RS-232 port provides the ability to configure the unit and run a test from the PC. Test reports can be generated directly from the instruments to a printer or through the PC using the DataView® analysis software.
