Showing 28–36 of 1343 results
-
$1.496
The 10A Micro-Ohmmeter Model 6255 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method, the Model 6255 is the most accurate Micro-Ohmmeter available, with results within 0.05%. The Model 6255 is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel. Three test modes are available, resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer from a PC. Measure from 1µΩ (0.1µΩ resolution) to 2500.0Ω Test current selection of 1mA, 10mA, 100mA, 1A and 10A Tests up to 60 minutes at 10Amps RTD temperature probe (optional) Automatic and manual temperature correction Two programmable alarm set points Stores up to 1500 test results Selectable inductive or resistive test modes Automatic multiple test mode (multiple tests without pressing the test button) Large multi-line electroluminescent display Internal rechargeable batteries conduct up to 5000 – 10A tests Rugged, double insulated waterproof case
-
$3.633
Perform tests normally or with both sides of the switch gear connected to the ground Four languages available through user selection Cooling system to improve the number of sequential tests that can be performed Programmable Test Duration to 120 seconds Direct viewing of stored tests on the instruments display Programmable and manual test current selection Accurately measures low contact resistances with test currents up to 200A Measures resistances up to 1O Low resolution of 0.1µO Large LCD digital display Stores up to 8000 test results USB communication interface Direct printout using DataView® software and a PC Rugged, light-weight and water-resistant case
-
$743
Contact Voltage Indication (Warns of Unsafe Conditions) Large Multi-Function Bright Yellow Organic Display (OLED) Selectable Test Frequency (Improves Accuracy in Inductive Environments) Storage of Measurements (O and/or A, V, Inductance with Time-Stamping) Model 6416: up to 300 Measurements Stored Designed to EN 61010-1, 600V CAT IV Safety Standards Clamping Diameter of 1.4” (35mm) with Large Jaw Design Displays Stored Measurements on the LCD Display Auto-Off Power Function Noise Icon And Buzzer Alert User to Presence of Dangerous Voltage and Current Levels Rugged Lexan® Head and Body Construction Resists Breakage > Note: *Replacement for AEMC 5717E Each Unit Includes Hard Carrying Case Calibration Loop Four 1.5V AA Batteries User Manual DataView Software
-
$889
Contact Voltage Indication (Warns of Unsafe Conditions) Large Multi-Function Bright Yellow Organic Display (OLED) Selectable Test Frequency (Improves Accuracy in Inductive Environments) Storage of Measurements (O and/or a, with Time-Stamping) Model 6417: up to 2000 Measurements Stored Designed to EN 61010-1, 600V CAT IV Safety Standards Clamping Diameter of 35mm with Large Jaw Design Displays Stored Measurements on the LCD Display or Via Bluetooth (Class 1- Communicates up to 900 Ft) to a PC (Requires a PC with Bluetooth Capability) (Model 6417) Auto-Off Power Function Alarm Function with Adjustable Set Point and Buzzer for Quick Field Checks for Volts, Amps and Ohms (Model 6417) Rugged Lexan® Head and Body Construction Resists Breakage Alarm Settings and Stored Memory Information Saved During Shutdown (Model 6417) Includes Dataview® Software for Data Storage, Real-Time Display, Analysis, Report Generation and System Configuration (Model 6417) Noise Icon And Buzzer Alert User to Presence of Dangerous Voltage and Current Levels
-
$1.321
Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments Selectable test voltage 16 or 32V up to 250mA test current 4-Point soil resistivity measurement with automatic calculation of Rho and user selection of Wenner or Schlumberger test method 2- and 4-Wire DC resistance measurement (Bond testing) with automatic polarity reversal Auto-off power management Rugged dustproof and rainproof field Rechargeable NiMH batteries from wall charger or vehicle power Remote set up and operation of all measurements using DataView® software supplied Stores up to 512 complete test results in internal memory Auto-off power management Automatic recognition of all electrode connections and their resistance value Includes DataView software
-
$1.637
3-Point fall-of-potential measurement 3-point earth coupling measurement Manual or automatic frequency scan from 4 to 513Hz for test accuracy in electrically noisy environments. Earth coupling testing and measuring Selectable test voltage of 16 or 32V with up to 25mA of test current. 4-point soil resistivity measurement with automatic calculation of Rho (r) and user selection of the Wenner or Schlumberger test method. 2- and 4-Wire DC resistance measurement (Bond testing) with automatic polarity reversal Auto-off power management Automatic recognition of all electrode connections and their resistance value. Stores up to 512 complete test results in internal memory. Optically isolated USB communications Remote set up and operation of all measurements using DataView software supplied Automatic report generation Rechargeable NiMH batteries from wall charger or vehicle power
-
$1.727
4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual and automatic frequency selection and automatic lead compensation 4-Pole (4-Point) Soil Resistivity measurement with automatic calculation of Rho (r) and user selection of the Wenner or Schlumberger test method 3-Pole (3-Point) Earth Coupling measurement Manual and automatic frequency scan from 40 to 513Hz for optimum test accuracy in electrically noisy environments Selectable test voltage of 16 or 32V up to 250mA of test current Auto-off power management Automatic recognition of all electrode connections and their resistance value Stores up to 512 complete test results in internal memory Optically isolated USB communication Remote set up and operation of all measurements using DataView® software supplied Automatic report generation Rechargeable NiMH batteries from wall charger or vehicle powerRugged dustproof and rainproof field case Ð IP54 rated in closed position Grounding standards IEC 61557 parts 4 and 5 compliant > Each Unit Includes Includes DataView® software for data storage, real-time display, analysis, report generation and system configuration
-
$1.316
Test ground resistance using the 2 clamp method (no auxiliary rods needed) 2- and 4-Pole Bond Resistance/Continuity measurement (DC Resistance) with automatic polarity reversal 3-Pole Fall-of-Potential measurement with manual or automatic frequency selection 4-Pole Soil Resistivity measurement with automatic calculation of Ρ and user selection of the Wenner or Schlumberger test method 3-Pole Earth Coupling measurement Manual and Automatic frequency scan from 41 to 513Hz for optimum test accuracy in electrically noisy environments Selectable test voltage of 16 or 32V up to 250mA of test current Auto-off power management Automatic recognition of all electrode connections and their resistance value Stores up to 512 complete test results in internal memory Optically isolated USB communication Remote set up and operation of all measurements using DataView® software Rechargeable NiMH batteries from wall charger or vehicle power Rugged dustproof and rainproof field case IP54 rated in closed position Grounding standards IEC 61557 parts 4 and 5 compliant Includes DataView® software for data storage, real-time display, analysis, report generation and system configuration
-
$1.629
Test ground resistance using the 2 clamp method (no auxiliary rods needed) 2- and 4-Pole Bond Resistance/Continuity measurement (DC Resistance) with automatic polarity reversal 3-Pole Fall-of-Potential measurement with manual or automatic frequency selection 4-Pole Soil Resistivity measurement with automatic calculation of Rho (r) and user selection of the Wenner or Schlumberger test method 3-Pole Earth Coupling measurement Manual and Automatic frequency scan from 41 to 513Hz for optimum test accuracy in electrically noisy environments Selectable test voltage of 16 or 32V up to 250mA of test current Auto-off power management Automatic recognition of all electrode connections and their resistance value Stores up to 512 complete test results in internal memory Optically isolated USB communication Remote set up and operation of all measurements using DataView® software Rechargeable NiMH batteries from wall charger or vehicle power Rugged dustproof and rainproof field case – IP54 rated in closed position Grounding standards IEC 61557 parts 4 and 5 compliant Includes DataView® software for data storage, real-time display, analysis, report generation and system configuration
