Showing 1324–1332 of 1343 results
-
$1.197
High Voltage Ratings to 3KV, 7KV, 10KV or 15KV High Current Ratings to 40 Amps Reduces hazardous operator exposure to high voltage Improves test quality, consistency and repeatability Enhances end product quality and reliability Up to 64 channels in a single compact unit Vitrek Hipot Tester control ports and RS232 interfaces standard GPIB optionally available May be controlled directly by Vitrek Hipot Tester Available QuickTest™ graphical software with full data aquisition CE mark certified to EN 61010 Made in the U.S.A.
-
$2.907
Highest Range of IR Test Voltage Choose from 6.5KVDC or 11KVDC maximum output High speed output control with Dual Coldfire microprocessors and Dual DSPs to provide dwell times as low as 100ms High Resistance Measurement Range — Transfer measurement up to 150 Teraohms Expansive Test Sequency Memory holds up to 100 tests with up to 254 steps per test. Tests can be selected via front panel, Ethernet, RS232 or with optional GPIB. Multi-Dwell Functionality — permits dwells at different voltage levels without having to return to zero between test steps – dramatically simplifying advanced analysis of dielectric properties Ethernet, RS232, Digital I/O & Scanner Control — All standard interfaces – Provides the highest level of test automation. GPIB available Safety Tested per EN 61010-1. EMC compliant to EN 61326-1 > Each Unit Includes TL-980 Test Lead Set NIST traceable Calibration Certificate
-
$3.496
Highest Range of IR Test Voltage Choose from 6.5KVDC or 11KVDC maximum output High speed output control with Dual Coldfire microprocessors and Dual DSPs to provide dwell times as low as 100ms High Resistance Measurement Range — Transfer measurement up to 150 Teraohms Expansive Test Sequency Memory holds up to 100 tests with up to 254 steps per test. Tests can be selected via front panel, Ethernet, RS232 or with optional GPIB. Multi-Dwell Functionality — permits dwells at different voltage levels without having to return to zero between test steps – dramatically simplifying advanced analysis of dielectric properties Ethernet, RS232, Digital I/O & Scanner Control — All standard interfaces – Provides the highest level of test automation. GPIB available Safety Tested per EN 61010-1. EMC compliant to EN 61326-1 > Each Unit Includes TL-980 Test Lead Set NIST traceable Calibration Certificate
-
$752
4.3 Color Touch Display Easy To Use Intuitive User Interface 2 Functions AC Hipot and Low Resistance Made in the USA Designed & Built in San Diego CA Compact, Lightweight, Rugged 100 nano-Amp Leakage Current Resolution Low Cost of Ownership 2 Year Calibration Interval USB 2.0, Serial/RS232, Digital I/O Interfaces are Standard Continuously Variable Insulation Resistance 20-5000V, 450GO Max Internal Self Test Fully Exercises Output and Verifies Current Accuracy Pre-Programmed Daily Verification Test With Optional PVD Test Load 150µS Safety Shutdown Ramped Discharge Capability Selectable ARC Detection 1-20mA Meets UL, CSA, IEC Safety Tester Requirements CE Safety Mark Certified to EN61010 2 Year Parts & Labor Warranty > Each Unit Includes TL-209 Power Cord Operating Manual QTPro-7 45 Day Free Trial NIST Traceable calibration certificate without data
-
$988
4.3 Color Touch Display Easy To Use Intuitive User Interface 2 Functions AC Hipot and Low Resistance Made in the USA Designed & Built in San Diego CA Compact, Lightweight, Rugged 100 nano-Amp Leakage Current Resolution Low Cost of Ownership 2 Year Calibration Interval USB 2.0, Serial/RS232, Digital I/O Interfaces are Standard Continuously Variable Insulation Resistance 20-5000V, 450GO Max Internal Self Test Fully Exercises Output and Verifies Current Accuracy Pre-Programmed Daily Verification Test With Optional PVD Test Load 150µS Safety Shutdown Ramped Discharge Capability Selectable ARC Detection 1-20mA Meets UL, CSA, IEC Safety Tester Requirements CE Safety Mark Certified to EN61010 2 Year Parts & Labor Warranty > Each Unit Includes 1 TL-209 Test Lead Set 1- Power Cord 1 Operating Manual 1 QTPro-7 45 Day Free Trial 1 NIST Traceable calibration certificate without data
-
$1.162
5KV AC-DC Hipot Insulation Resistance Tester 4.3 Color Touch Display—Easy To Use Intuitive User Interface 6 Functions to Choose From—AC/DC Hipot, IR, Ground Bond, Continuity and Built-in Switching Made in the USA—Designed and Built in San Diego CA Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) and Accurate 5KV AC/DC Hipot, 20mA max source current Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution 100 nano-Amp Leakage Current Resolution Low Cost of Ownership—Two Year Calibration Interval USB 2.0, Serial/RS232, Digital I/O Interfaces are Standard Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max Multi Mode IR with Steady/Rising Pass Mode Test Memory Stores up to 999 Steps and 60 Test Sequences Internal Self Test Fully Exercises Output and Verifies Current Accuracy Pre-Programmed Daily Verification Test With Optional PVD Test Load 150µS Safety Shutdown Ramped Discharge Capability Selectable ARC Detection 1-20mA Meets UL, CSA, IEC Safety Tester Requirements CE Safety Mark Certified to EN61010 Two Year Parts and Labor Warranty
-
$872
4.3_ Color Touch Display – Easy To Use Intuitive User Interface 6 Functions Choose From – AC/DC Hipot, IR, Ground Bond, Continuity & Built-in Switching Made in the USA – Designed & Built in San Diego CA Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) & Accurate 5KV AC/DC Hipot, 20mA max source current Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution 100 nano-Amp Leakage Current Resolution Low Cost of Ownership – 2 Year Calibration Interval USB 2.0, Serial/RS232, Digital I/O Interfaces are Standard Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max Multi Mode IR with Steady/Rising Pass Mode Test Memory Stores up to 999 Steps and 60 Test Sequences Internal Self Test Fully Exercises Output and Verifies Current Accuracy Pre-Programmed Daily Verification Test With Optional PVD Test Load 150µS Safety Shutdown Ramped Discharge Capability Selectable ARC Detection 1-20mA Meets UL, CSA, IEC Safety Tester Requirements CE Safety Mark Certified to EN61010 2 Year Parts & Labor Warranty
-
$77
Yokogawa Model # CL130 Approved for comformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V) Method of detection: Mean value Display: LCD (Digital display: 1999 counts) Response Time: Approx. 1 second (approx. 2 seconds on resistance renge) Range Switching: Manual-range Data Hold: On all range Ambient temperature and humidity: -10 to 50 °C (no condensation), up to 30 deg.C, 90% RH up to 40 deg.C, 75% RH, up to 50 deg.C, 45% RH Influence of external magnetic field: 2A or less at 400A/m Influence of conductor position: ±2% or less Circuit Voltage: 600Vrms or less Withstanding Voltage: 5.55kV AC for one minute Power Supply: 6F22(006P)9V ×1 or 6LR61 ×2 Battery Life: Approx. 200 hours (continuous) Consumed Current: Approx. 2mA Auto power-off: Approx. 10 minutes Diameter of measurable conductor: 30mm at maximum Dimensions: Approx. 93(W) × 210(H) × 40(D)mm Weight: Approx. 400g > Each Unit Includes Users manual (IM CL130) Batteries Carrying case (93032)
-
$132
Yokogawa Model # CL135 Approved for comformity to safety standard EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V) Method of detection: True RMS Display: LCD (Digital display: 1999 counts) Response Time: Approx. 1 second (approx. 2 seconds on resistance renge) Range Switching: Manual-range Data Hold: On all range Ambient temperature and humidity: -10 to 50 °C (no condensation), up to 30 deg.C, 90% RH up to 40 deg.C, 75% RH, up to 50 deg.C, 45% RH Influence of external magnetic field: 2A or less at 400A/m Influence of conductor position: ±2% or less Circuit Voltage: 600Vrms or less Withstanding Voltage: 5.55kV AC for one minute Power Supply: 6F22(006P)9V ×1 or 6LR61 ×2 Battery Life: Approx. 200 hours (continuous) Consumed Current: Approx. 2mA Auto power-off: Approx. 10 minutes Diameter of measurable conductor: 30mm at maximum Dimensions: Approx. 93(W) × 210(H) × 40(D)mm Weight: Approx. 400g > Each Unit Includes Users manual (IM CL130) Batteries Carrying case (93032)
