Showing 1–9 of 1343 results
-
$876
Pressure ranges to 36,000 psi (2500 bar) 0.025%, 0.05%, 0.1% or 0.2% FS accuracy % pressure indication with fan-shaped graph scale for visual reference Fully temperature compensated accuracy Panel mount version is available Large, easy to read display with 5-digit resolution Back lighted display % pressure indication with fan-shaped graph scale for visual reference Display flash warning when pressure over 120% of FS Bottom mount or panel mount ATEX certified intrinsically safe (Model ADT 681IS) NIST traceable calibration with data(included) 9V battery power or AC adapter (optional)
-
$380
AEMC Model # 1015 Catalog # 1403.01 Measures Insulation Resistance ay 500V and 1000V Push Button for Battery Check Compact and Light Weight Large, Direct Reading, Colored Scale CE Mark > Each Unit Includes Carrying Case Shockproof rubber housing Two color coded leads Red insulated alligator clip Black test probe Spare fuse Batteries Users manual
-
$166
AEMC Model # 1026 AEMC Catalog # 2117.72 Test Voltages of 250, 500 & 1000V Measures Insulation Resistance to 4000M Ohm Measures AC and DC Voltage for 600V Measures Resitance to 4000 Ohm Lock Feature to Apply Test Voltage for Extended Time > Each Unit Includes Test leads with large alligator clips Soft carrying case Battery Users manual
-
$936
True Megohmmeter Test voltage combinations of 50V, 100V, 250V, 500V and 1000V Insulation measurement to 4000GΩ (4TΩ) Direct measurement of DAR and PI values Direct measurement of sample Capacitance Display of test voltage and run time Programmable test run times and PI times Smooth and Alarm functions Automatic test inhibition if live sample >,25V Automatic discharge after use with voltage display Large dual display with time, voltage and measurement Bright blue electrolumenescent backlight Battery powered Auto power-down when not in use Remote operation with optional test probe Rugged dual wall weatherproof field case with detachable lead/accessory pouch EN 61010-1, 600V Cat. III Includes detachable accessory pouch, one red, one blue test lead, one black shielded lead, three color-coded alligator clips, batteries, spare fuses, and manual
-
$1.077
AEMC Model # 16 Catalog # 213.3 5, 1, 25, 5, 1V Digital Megohmmeter with Analog Bargraph &Memory Automatic DAR, PI and Capacitance Automatic Discharge with Voltage Display Programmable test run time CE marked and IEC 11-1 CAT III, 6V RS-232 Communication Direct Printing > Each Unit Includes Detachable accessory pouch (one red, one bluetest lead, one black shielded lead, three color coded(black, red and blue) Alligator clips, One black test probe) (1) 6ft RS-232 DB9/DB25 F/F Cable Recharable battery DataView Lite Software US 12V power cord Spare fuses User Manual
-
$282
Each Unit Includes Two 150 foot color-coded leads on spools, one red and one blue One 30 foot green lead Two 14.5 T-shaped auxiliary ground electrodes One set of five spaded lugs 100 foot tape measurer Carrying bag
-
$126
UL94 VI flame retardant self-extinguishing 6000-count blue electroluminescent backlit display Measures up to 1000VAC (1400V peak), 1400VDC and AC DC with resolution to 10mV Measures up to 600AAC and 900ADC Model 205 measures single- and three-phase power (real, reactive, and apparent) up to 600kW with resolution to 1W Measures frequency to 20kHz with 0.1Hz resolution Auto selects AC or DC voltage measurement True InRush® current measurement with 1ms capture Jaw opening to 1.33 (34mm), IP54 Rated Leads are constructed with a flexible silicone material
-
$332
Very high sensitivity Differential or leakage current from 5A Current up to 4A Two switch-selectable measurement ranges: 4AAC/4AAC Large inside jaw diameter (>,4) allows use on large or multiple conductors Work with single-, dual- and three-phase networks Connect directly to DMMs on mV or VAC range
-
$188
The AEMC 275HVD Non-Contact High Voltage Detector detects radiated electrical fields from about 10 (25 cm) away (and farther for lower voltage), is for use with hot sticks incorporating a universal spline adapter, and has an audible buzzer and bright red LED to indicate live voltage. The eight voltage sensitivity ranges, selected by rotary selector, are 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and 275kV. The self-test position ensures that circuitry, annunciators, and battery work before use. The detector is for use only with an insulated rod or hot stick rated at the appropriate working voltage and is not for use on shielded cables. It weighs 1.30 lbs. (0.59 kg) with batteries. The case measures 9 (229 mm) in height and 3.78 (98 mm) in width. Applications include identifying and checking live cables, checking and detecting live high voltage cables, finding faults in flexible cables, checking grounding equipment, servicing neon lighting, tracing live wires, checking high frequency radiation, and detecting residual or induced voltages. AEMC Model # 275HVD Catalog # 2131.12 Non-contact voltage detector Wide range of detection, finds 8V to 275kV, one instrument fits all applications Eight switch selectable voltage ranges Lightweight, minimizes sway at the end of long hot sticks Audible and visual indication of live voltage Self-test position ensures that all system functions and indicators are working properly by energizing the complete system Designed for use with hot sticks incorporating a universal spline adaptor Powered by three standard Alkaline C cell batteries > Each Unit Includes (3) C Batteries Padded Carrying Case User Manual
