Clamp-ons

AC current measurement to 60A Leakage current measurement with resolution of 0.01mA AC voltage to 400V Resistance measurement and continuity beeper Min/Max control to see largest or smallest values in a series of measurements Relative value measurement to determine differentials Data Hold to freeze measurement value on the display Digital display with Analog bargraph Jaw opening 30 mm (1.2 in) Auto-Power-Off to save battery life Minimum Resolution 0.01mA Display: 3-3/4, LCD incl. functions and symbols Bargraph: 40 segments Range Selection: manual Auto-Power-Off: approx. 30 min. Overload display: the left digit is blinking Measuring rate: 20 measurements/sec. (Bargraph), 2 measurements/sec. (LCD) Clamp opening: ca. 30 mm (1.2”) Overvoltage Categorie: CAT II, 600 V, CAT III, 300 V Pollution degree: 2 Height above MSL.: up to 2000 m, indoor operation Battery display: at low battery Power supply: Battery 2 x 1,5 V IEC LR6 (alkaline) Current Consumtion: approx. 10 mA Operation temperature: -10° C … 50° C (14° F 122° F) Storage temperature: -20° C … 60° C (-4° F 140° F) Humidity: &lt, 75 % relative humidity > Each Unit Includes Batteries Carrying case test leads Users manual

8 functions/11 ranges Data and AC Peak Hold DC auto zero Carrying case included 33/4 digit, LCD, max reading of 3999 9V battery Maximum Jaw Opening: 40 mm (1.57?) Autoranging for frequency measurement, Low Battery Indication Auto-Power Off after 30 minutes Manual function and range selection with rotary selector > Each Unit Includes Test Leads Battery Manual Carrying case

Dual Displays – Permits simultaneous reading of Amperage & Voltage AC Current to 600A New thin jaws, 5mm thinner than others to access tight measurement spaces Micro Amps measurement for testing Flame Sensors Capacitance to 3000 µF Temperature with Type-K Thermocouple probe AC and DC Voltage to 600V Resistance to 40M? Continuity Buzzer Frequency measurement Diode test Hold and Maximum reading functions In rush current Accommodates conductors up to 28 mm (1.1”) in diameter Auto ranging Auto power off and low battery indication Rubber over-molded case Battery Life: 95 hours approx. (in DCV mode) Size: L190mm X W 63mm X H 32mm (L 7.48” X W 2.48” X H 1.25”) Weight: 204 g (0.450 lb approx.) Safety: CE EN61010-1, EN61010-2-032 Pollution Degree 2 > Each Unit Includes Test Leads Carrying Case Bead Type Thermocouple with banana plug Users Manual

TRMS Dual Displays – Permits simultaneous reading of Amperage & Voltage AC Current to 600A Micro Amps DC measurement for testing Flame Sensors Capacitance to 3000 µF Temperature with Type-K Thermocouple probe AC and DC Voltage to 600V Resistance to 40MΩ Continuity Buzzer Frequency measurement Hold and Maximum reading functions In rush current Accommodates conductors up to 26mm (1.02”) in diameter Auto ranging Auto power off and low battery indication Rubber over-molded case Overload protected CAT III 600V, cULus Listed > Each Unit Includes Industrial test leads Carrying case Type K probe Temperature Adapter