Clamp-ons

Measuring up to 1500 A ac or dc the DCM1500 also offers 750 Vac and 1000 Vdc ranges making the instrument ideal for use in the installation, maintenance, monitoring or checking of large a.c. or d.c. electrical systems and equipment. The large clear digits of the numeric display are complemented by the high-resolution digital bar graph, useful for indicating trending and fluctuation of measurement. The backlight assists use in poorly lit areas such as distribution cupboards and corners of switchrooms, and the data-hold feature enables use on difficult access cables where otherwise the display may be impossible to see. DC and AC current up to 1500 A True RMS measurement for greater accuracy Large jaw size safely assists with uninsulated conductor measurements 750 VAC and 1000 VDC Resistance , continuity and frequency Peak, min/max and data-hold functions > Each Unit Includes Battery Pouch Test leads red and black Test lead set and crocodile clips 1002-001 Fused test lead set 1002-015

The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications. Digital ground leakage clamp meter measures alternating current (AC) and locates earth leakage faults Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform Clamp with 1.57 (40 mm) jaw opening measures current without touching or interrupting the circuit 10-microamp minimum resolution detects small amounts of leaking current in ground faults Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V and category III installations up to 500V > Each Unit Includes Megger DCM300E average-sensing digital clamp meter (2) 1.5V LR44 batteries (installed) Carrying pouch Instructions

The Megger DCM320-EN Digital Clampmeter has both clampmeter and multimeter functions, measures AC current up to 400A, AC and DC voltage up to 600V, and resistance up to 20 Megaohms. The multimeter has clamp jaws for use in industrial and domestic electrical system installation. Current only and multimeter models Measures up to 400 A a.c. with low current ranges for improved resolution 600 V ac/dc 20 M Resistance IEC61010 CAT III 600 V Data Hold Small pocket-size design Exceptional battery lifetime Supplied with carry case Weight 225 g including batteries 56 mm (W) x 188 mm (H) x 28 mm (D) Warranty 1 year > Each Unit Includes Battery Pouch User guide Test leads

The Megger DCM330-EN digital multimeter with non-contact voltage detection is an average-sensing meter for measuring current, voltage, and resistance in electrical testing applications. The meter has an open-jaw clamp with a 0.63-Inch (16 mm) jaw opening that measures alternating current (AC) to 200 amp without touching or interrupting the circuit. 200.0 A a.c. open-jaw current measurement 0.1 V to 1000 V auto-ranging a.c. and d.c. voltage measurement 0.1 ohm to 20.00 ohm resistance range Continuity buzzer Diode check Non-contact detection of a.c. voltage CAT IV 600V The Megger DCM330 Fork Multimeter is a convenient, compact instrument designed to measure ac current up to 200 A, and additionally perform all the functions of a basic multimeter.

The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of a.c. or d.c. electrical systems and equipment. DC and AC current and voltage 600 A and 600 V Resistance and continuity 3 1/2 digit, 4000 count display with backlight High resolution digital bargraph Peak, min/max and data-hold functions Dimensions 68 mm (W) x 237 mm (H) x 42 mm (D) Weight 225 g including batteries > Each Unit Includes Batteries Pouch Test leads User guide

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions. CAT IV 600 V current measurement to 1000 A AC 1 mA/1 A sensitivity with rated burden of 1 Ω Large jaws for cables up to 52 mm Overvoltage protection of the output terminals Suitable for leakage currents

4-Range, rain-tight, flexible current clamp for the MPQ and PA9 series. Self-Identifying on MPQ. Supports 60, 600, 3000, 6000A ranges. Powered by unit. 37cm I.D. (Cable to instrument 1.82m/6ft) MCCV6000-37 Transformer Current 4 Range, Rain Tight Flex CT PQ 18CM ID Flexible Multi-Range Auto Identifying

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions. CAT IV 600 V current measurement to 1000 A AC 1 mA/1 A sensitivity with rated burden of 1 Ω Large jaws for cables up to 52 mm Overvoltage protection of the output terminals Suitable for leakage currents