Showing 199–207 of 274 results
-
$137
True RMS measurement, allowing it to accurately measure current input despite distortion caused by a poor power supply environment or other issues This capability makes the instrument an excellent choice for use in inverter inspection and maintenance applications Compact, low-profile, lightweight body with exceptional portability DC current 100.0/1,000 A, 2 ranges Basic accuracy: ±1.5% rdg., ±5 dgt. AC current 100.0/1,000 A, 2 ranges Basic accuracy: ±1.5% rdg., ±5 dgt DC voltage 420.0m/4.200/42.00/420.0/600 V, 5 ranges Basic accuracy: ±1.3% rdg., ±4 dgt. Maximum conductor diameter 35 mm Dimensions and weight 57 (W) × 180 (H) × 16 (D) mm, 150 g Continuous operating time 35 h Resistance 420.0/4.200k/42.00k/420.0k/4.200M/42.00MO, 6 ranges Basic accuracy: ±2% rdg., ±4 dgt. Other functions Buzzer at continuity of (50Ω ±40Ω) or less, data hold, auto power save, auto zeroing (DC A) Display LCD, max. 4,199 dgt., display refresh rate: 2.5 times/sec > Each Unit Includes Test Lead Portable Case
-
$192
Measure for leakage current and load all with the same device Innovative flip clamp design Flip display to see measurement readings from any angle 1mA to 1000A accuracy guaranteed, 6 ranges and bar graph display Measure and display only the leakage current of commercial frequency components using the filter function AC Current 30.00m/300.0m/6.000/60.00/600.0/1000A, 6 ranges, 45Hz to 400Hz, True RMS Crest factor 2.8 and under (1.68 and under at 1000 A range) Filter function Cut off frequency 180Hz at filter ON (-3dB) Basic accuracy: ±1.5% rdg. ±5dgt. (50/60Hz, filter ON) Other function Flip-open mechanism (but still retaining proper orientation of display), Back light, Maximum value display, Data hold, Auto power off Display Digital LCD, max. 6000dgt., 91 segments Display refresh rate: 1.1 sec or higher Power consumption Coin type lithium battery (CR2032) × 1, Continuous use 18 hours Core jaw dia. f 24mm (0.94 in) Dimensions, mass 50mm (1.97 in) W × 130mm (5.12 in) H × 26mm (1.02 in) D, 135g (4.8 oz) > Each Unit Includes Strap Carrying Case Coin type lithium battery (CR2032, for trial purposes only) Quick start sticker
-
$133
Easy-to-use, current to voltage transformer Intended primarily for application as an input sensor for a recorder A secondary output provides an AC voltage waveform, and can be connected to an input impedance over 1M-ohm BNC terminal Insulated BNC terminal Rated current 500 A AC (10 A to 500 A full scale, 6 ranges selectable) Frequency band width 40 to 1 kHz (±6 % max.) Accuracy (at 50 or 60 Hz) ±3 % f.s. Output rate 0.2 V AC at full scale range (waveform output), Output terminal: Insulated BNC Max. circuit voltage 600 V AC rms (insulated wire) Core jaw dia. Ø46 mm(1.81 in), or 50 mm(1.97 in) × 20 mm(0.79 in) busbar Dimensions, mass 74 mm(2.91 in)W × 184 mm(7.24 in)H × 37 mm(1.46 in)D, 420 g (14.8 oz), cord length: 3 m(9.84 ft)
-
$204
10 Amp to 50 Amp Rated current 500 A AC (10 A to 500 A full scale, 6 ranges selectable) Frequency band width 40 to 3 kHz (±1 % max.), phase ±2.5 ° max. Accuracy (at 50 or 60 Hz) ±1.5 % rdg. ±0.1 % f.s. Output rate 0.2 V AC at full scale range (waveform output), Output terminal: Insulated BNC Max. circuit voltage 600 V AC rms (insulated wire) Core jaw dia. Ø46 mm(1.81 in), or 50 mm(1.97 in) × 20 mm(0.79 in) busbar Power supply None Dimensions, mass 74 mm(2.91 in)W × 184 mm(7.24 in)H × 37 mm(1.46 in)D, 410 g (14.5 oz), cord length: 3 m(9.84 ft)
-
$166
Hioki Model# 9660 Rated input current 100 A AC Rated output voltage 0.1 V AC Accuracy (at 45 to 66 Hz) Amplitude: ±0.5 % rdg. ±0.2 % f.s. , Full scale (f.s.) is the 3196 range value, Phase: ±1 ° or less (at 90 A or less), ±1.3 ° or less (at 90 A to 100 A) Frequency characteristics 66 Hz to 5 kHz (±1 % or less from accuracy) Max. allowable input continuous 130 A rms (45 to 66 Hz) Max. circuit voltage 300 V AC rms (insulated wire) Core jaw dia. Ø15 mm(0.59 in) Dimensions, mass 46 mm(1.81 in)W × 135 mm(5.31 in)H × 21 mm(0.83 in)D, 230 g (8.1 oz), cord length: 3 m(9.84 ft)
-
$180
For inverter devices or commercial power lines Up to 500 A, or 1000 A measure Rated primary current AC 500 A Output voltage AC 500 mV f.s. (AC 1 mV/A) Amplitude accuracy ±0.3 % rdg. ±0.01 % f.s. (45 to 66 Hz, f.s.= rated primary current) Phase accuracy ±0.5° (at 45 Hz 5 kHz) Max. allowable input Continuous 550 A rms (at 45 66 Hz) Frequency characteristics 40 Hz to 5 kHz: ± 1.0% (deviation from accuracy) Max. rated voltage to earth AC 600 V rms (insulated wire) Core jaw dia. 46 mm (1.81 in) Dimensions, mass 77 mm (3.03 in) W × 151 mm (5.94 in) H × 42 mm (1.65 in) D, 380 g (13.4 oz), cord length 3 m (9.84 ft)
-
$277
Product Description Hioki clamp meters are best in class handheld current and voltage meters for safely and accurately measuring power lines. The CM3286 clamp on power meter can measure voltage, current, power, power factor, phase angle, reactive power or frequency, as well as detect phase sequence on live lines at any desired point of a single-phase circuit or three-phase circuit. CAT IV 600V, CAT III 1000V Display four parameters simultaneously A handheld power meter that measures from 5 W of power and 60 mA of current Measure power ranging from 5 W at a low current of 60 mA to 360 kW In addition to current, voltage, and power, measure simple integral power consumption and phase sequence Features and functions deliver fast and efficient testing Hold measured values to send them to a smartphone, quick and easy data recording (CM3286-01 only) > Each Unit Includes Connection cord L9257 LR03 Alkaline battery ×2 Carrying case C0203 Instruction manual
-
$304
Hioki clamp meters are best in class handheld current and voltage meters for safely and accurately measuring power lines. The CM3286 clamp on power meter can measure voltage, current, power, power factor, phase angle, reactive power or frequency, as well as detect phase sequence on live lines at any desired point of a single-phase circuit or three-phase circuit. Built in Bluetooth® wireless technology CAT IV 600V, CAT III 1000V Display four parameters simultaneously A handheld power meter that measures from 5 W of power and 60 mA of current Measure power ranging from 5 W at a low current of 60 mA to 360 kW In addition to current, voltage, and power, measure simple integral power consumption and phase sequence Features and functions deliver fast and efficient testing Hold measured values to send them to a smartphone, quick and easy data recording (CM3286-01 only) > Each Unit Includes Connection cord L9257 LR03 Alkaline battery ×2 Carrying case C0203 Instruction manual Notice Regarding Equipment That Emits Radio Waves
-
$143
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. Model CM4371 is a 600A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment. CAT IV 600 V, CAT III 1000 V Multiple measurement functions Automatic AC/DC function helps boost work efficiency Measure DC voltages of up to 1700 V Simultaneously measure inrush current in RMS and crest values Expanded -25 °C to 65 °C operating temperature range IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50
