Cable Tracers and Locators

The Megger 656621 AccuTrace cable route tracer is a cable tracer for locating, tracing, and measuring the depth of energized electrical cables. The tracer includes a transmitter and separate receiver. The transmitter sends an energized signal down a line either by magnetic induction, which does not require direct contact with the cable, or through a direct conductive connection. Signal strength and proximity to the cable are indicated visually on the receiver or audibly. Cable tracer for locating, tracing, and measuring the depth of buried energized electrical cables Transmitter can energize line either by magnetic induction or by conductive connection with metallic cable Signal strength indicated visually or audibly with adjustable volume that can be heard without headphones Distance range of 1.5m to 5km (5 ft. to 3 mi.) and buried up to 9m (30 ft.) deep Both peak- and null-tracing modes can be used on same trace for speed and accuracy

Energized and De-energized Line Tracing Conductive or Inductive Coupling “Locate Mass” Function to Locate Buried Metal Masses Such as Manhole Covers Peak and Null Detection Capabilities > Each Unit Includes Four “C” Alkaline Batteries Protective Tote Bag Operating Instructions

Dramatically reduces measuring time Inherently safe Designed for ease-of-use Hand-held portability Calibration and maintenance free operation No physical connection to cables or wires Measures the height of up to six overhead cables

The Megger CFL510G Hand-held Time Domain Reflectometer is ideal for locating faults on metallic telephone, CATV and power cables. It is equipped with four output impedances (25, 50, 75, & 100 Ω) and has a velocity between 0.2 and 0.99 which will meet any cable test requirements. Simple to Operate Auto Set-up for Instant Use Ultra Fast Pulse for Near-End Fault Identification Designed for Use on all Metallic Cable Pairs Dual Cursors Allow Complete Flexibility, Giving the User Full Control and Instant Indication of Distance Between Two Points A Unique, Easy One-Button Press and HOLD Feature Allows Comparison Between Cable Conditions Extra High Resolution, a White-Light Backlight, and Grayscale Tones Gives a Vibrant Graphical Display, Useful in Identifying Key Events on the Trace Resolution to 0.1 m For Use on Telecom TNV-3 Circuit or 150 V CATIV Power Circuit Power Blocking Filter not Required Environmental Protection to IP54 Auto Selected Output Impedance (Between 25, 50, 75 and 100 ohms) 2 ns Pulse for Near-End Fault Location AUTO Option Selecting Gain and Pulse for Each Range Display Distance in Meters or Feet > Each Unit Includes Hard carrycase Miniature clip test lead set User guide CD

The Megger CFL535F series time domain reflectometer (TDR) is a cable fault locator for identifying and locating faults in metallic cabling. The TDR has single- or dual-cursor measurement. Single-cursor measurement indicates the distance from the start of the cable to the cursor, while dual-cursor measurement indicates the distance between identified faults. Automatic event finder key No blocking filter required for live line testing up to 480 VAC Dual input and output ports Graphical help menu 5 user selectable pulse widths per range Trace averaging Real time and Xtalk memory modes > Each Unit Includes Rechargeable batteries

The Megger® CFL535G is a state of the art, dual channel, high resolution, compact Time Domain Reflectometer with a color screen for locating faults on paired metallic cables. The CFL535G has a minimum resolution of 0.3 ft /0.1 m and a 60 kft/20 km maximum range depending on the velocity factor selected and the cable type. Five output impedances are available (25, 50, 75, 100, 125 ohms) and an auto impedance matching feature. The velocity factor can be set between 0.2 and 0.99 to meet any cable test requirements Comprehensive Dual Channel capability with dual aspect display Auto set up mode for instant use Ultra fast pulse for near end fault identification IP 54 rating offers real life working

The CHM2000 Series of Cable Height Meter utilizes ultrasonic sound to determine the height of up to six overhead cables and wires. The instrument is designed to address specific measuring requirements on cables up to 75 feet (23 m). The CHM2000 is designed for telecommunication applications. Dramatically reduces measuring time Inherently safe Designed for ease-of-use Hand-held portability Calibration and maintenance free operation No physical connection to cables or wires Measures the height of up to six overhead cables

The Megger CHM600 Cable Height Meter utilizes ultrasonic sound to determine the height of up to six overhead cables and wires. The instrument is designed to address specific measuring requirements on cables up to 50 feet. The CHM600 is designed primarily for power cable applications. Measures the height of up to six overhead cables without touching or connecting to the wires Built-in temperature sensor improves measurement accuracy by accounting for variations in the speed that sound travels in different ambient temperatures Provides readings in meters, feet, or inches Calibration feature helps ensure accuracy of readings Automatically turns off after three minutes of non-use to conserve battery life > Each Unit Includes Megger cable height meter (1) 9V battery (installed) Instructions