Cable Tracers and Locators

Measures these AWG wire gages: 18, 16, 14, 12, 10, 8, 6,4, 2 , 1/0, 2/0, 3/0, 4/0 Measures these kcmil wire sizes: 250, 350, 400, 500, 600, 750, 1000 Eight user-programmable settings for other gages Powered by (6) 1.5V AA batteries Application : Use to measure the length of insulated copper or aluminum conductors on a spool, and to measure low resistance values. Display : 4-1/2 digit LCD Resistance Range : 199.99 milliohms to 1999.9 ohms in 5 ranges Voltage Rating : Not intended for connection to live voltage

Measures these metric wiresizes: 0.75, 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300, 400,500 mm2 Eight user-programmable settings for other sizes Powered by (6) 1.5V AA batteries Replacement calibration rods (pair) available as CLM-ROD, UPC 02721 Replacement Kelvin clips (pair) available as CLM-CLIPS, UPC 02722

Inductive coupling with 33kHz signal by integrated antenna Direct coupling with 33kHz by external accessories Selectable transmitted power of signal Blinking or continuous signals Level battery indication Passive mode without transmitter Active mode with transmitter Automatic measurement of depth Manual/Automatic sensitivity selection Display backlight Speaker with volume control Headphone jack for use in loud environment Floor cap for housing protection > Each Unit Includes TX5000 : Transmitter for HT-5000 RX5000 : Receiver for HT-5000 Cable banana-alligator clip, 2m, 2 pcs Cable banana-alligator clip, 10m Metal probe Batteries Carrying bag User manual

Verify if new VDV installations are wired correctly Troubleshoot existing VDV wiring installations Locate hard to find cables Test & Identify all common errors in modular plug/jack terminations that lead to slow/no connections: Shorts, Opens, Miswires, Split Pairs, and Reversals Verify custom made cables for proper wiring and continuity (RJ-45, RJ-11, F, BNC, RCA) Identify shielded and 568A to 568B uplink cables Identify a single cable within a bunch of cables Tone & Trace entire cables, select pairs, or individual wires within a cable > Each Unit Includes VDV Main Test unit with 1 Remote Amplifier Probe with volume control Carrying case RJ-45 Alligator clip cable assembly 2 RJ-45 Patch cable (12“) 2 RJ-11 Patch cables (4“) 2 F-Male Coax patch cables (4“) F-Male to BNC-Female adapter F-Female to BNC-Female adapter F-Male to RCA-Female adapter F-Female to RCA-Female adapter F-81 adapter 2 Instruction manuals 2 9V batteries

Identifies Breakers and Fuses with High Level of Confidence Trace Wires Behind Walls and under Floors Pinpoints Ground Faults, Line Breaks, Opens and Shorts Can be Used on Circuits from 0-600V AC/DC “0-99” Display of Signal Strength Audible Intensifies in Tone/Pitch with Signal Strength Works on Energized or De-Energized Circuits Four Mode Sensitivity Peak Bar Graph Auto Rotating LED Displays Battery Level Indicator Inductive Clamp Not Included

Identifies Breakers and Fuses with High Level of Confidence Trace Wires Behind Walls and under Floors Pinpoints Ground Faults, Line Breaks, Opens and Shorts Can be Used on Circuits from 0-600V AC/DC “0-99” Display of Signal Strength Audible Intensifi es in Tone/Pitch with Signal Strength Works on Energized or De-Energized Circuits Four Mode Sensitivity Peak Bar Graph Auto Rotating OLED Displays Battery Level Indicator Inductive Clamp Not Included

Suretrace 959 Ckt Tracer Kit TR-955 Transmitter Tests energized circuits up to 600V AC/DC Tests de-energized circuits Injects a powerful signal into the circuit Can be used on GFCI protected circuits Indicates presence of AC/DC voltage Low battery indicator Supplied with four AA batteries > RC-959 Receiver Super bright OLED display Rotating display (in 90º increments) Displays 0-99 numeric signal strength Four modes of sensitivity CertainCircuit detection Peak detecting bar graph Audible indication (pitch/tone) Displays battery life remaining Supplied with three AA batteries > Inductive Clamp & Battery Pack Induces a signal onto the circuit 1 in. jaw opening 6 ft. cord Powered solely by a separate battery pack Battery pack has a magnetic strap forhanging in panels > Ruggedized overmolding for enhanced impact resistance Handset signal communication is tuned tighter to reduce false signaling on noisy circuits Bolder display for effortless viewing Sensitivity range expanded – no signal saturation on multiple breakers. Enhanced power management – 10% longer battery life and smart low  battery indicator prevents performance degradation Peak detector displays signal intensity fluidly CertainCircuit feature now on all models

Offers all standard copper testing including: Coax, 6Pin (RJ-11/12), 8Pin (RJ-45) Connectors for Copper Cable Testing Wiremap for Miswires, Split Pairs, Shorts and Opens Analog Tone Generator Voltage Protection Shielded Cable Testing Single Screen Results > > Larger 2.9 Display Backlight Hub Blink Cable Length Distance to Open Carry Case & Cables > Each Unit Includes 1 x tester 1 x dual port remote unit 1 x coax remote unit 1 x alkaline battery 1 x multi-language user guide 2 x RJ45 to alligator clip cable 15” 2 x screened RJ45 to RJ45 cable 6” 2 x RJ11/12 to RJ11/12 cable 4” 1 x F-type plug to F-type plug cable 9” 1 x F-81 barrel splice 1 x BNC female to F-type male adapter 1 x BNC female to F-type female adapter 1 x RCA female to F-type male adapter 1 x RCA female to F-type female adapter 1 x wallet wiring card 1 x carry case