Showing 1–9 of 53 results
-
$221
The AEMC Cable Locator Model 6681 detects buried (in ground or in walls) telecommunications cables, electric power and other cables, and metal pipes, during modification or maintenance work on installations of category III (or lower), at voltages of 300V (or less) with respect to ground. The system can locate open circuits, shorts, track cables and locate fuses or circuit breakers. The instrument is a portable system that includes a transmitter, a receiver, and accessories. The transmitter and receiver both have a large back-lit LCD and large keys. The transmitter applies a modulated AC to the circuit that is to be located, which creates a proportional alternating electric field. The transmitter is also an AC/DC voltmeter, the display of the measured voltage is accompanied by a symbol warning of the presence of a voltage. In addition, the transmitter has a self-test function, indicating good transmission between transmitter and receiver. Both the transmitter and receiver units include a flashlight feature that assist the operator when working in dark unlit areas. The receiver features a sensitive sensor that generates a display proportional to the electric field detected. The variations of this signal, after decoding, processing, and shaping, enable the user to determine the location of underground cables and pipes, and detect any faults in them. The receiver also includes a buzzer that changes pitch as a function of the strength of the detected signal. Operates in both single-pole and two-pole modes Locates and traces hidden cables Detects and locates line breaks Detects faults in floor radiant heating systems Detects constricted sections of non-metallic pipes Detects circuit breakers/fuses Detects short circuits Backlight and flashlight functions Compliant with standards electrical safety standard EN 61010-1 and electromagnetic compatibility standard EN 61326-1 Applications: Detects breaks in conductors in walls or under a floor detects faults in a floor radiant heating system, finds constricted sections in pipes made from non-conducting materials such as plastic, locates metallic water pipes and heating radiators, identifies branch circuits on the same floor, performs underground circuit tracing, detects circuit breakers and fuses, finds short circuits, sorts and identifies conductor pairs, measures line voltage
-
$555
11 range scales indicating cable faults and terminations up to 19,000 ft (6000m) in feet or meters Detects opens, shorts, taps, faulty taps, bridge taps, splitters, high resistance, wet cables, splices and more Identifies impedance mismatches Works with twisted pair, parallel and coaxial cable Selectable cable impedance (25ohms, 50ohms, 75ohms, 100ohms) Over-voltage protection up to 250V Adjustable cursor assists in locating faults and termination Built-in tone generator for tracing and locating cables Large high-visibility blue electroluminescent backlit display
-
$247
Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires Unique graphical and digital display of fault information and length Indicates distances to opens and shorts and identifies locations Built-in tone generator for tracing and locating cables Built-in service check function to detect telephone, 10BaseT, 100Mbit and token ring Visual and audible warning of live telephone network voltages Works with all Category 6 cables Large high-visibility blue electrolumiscent backlit display Active remote identifiers indicate Pass/Fail at remote end Up to 16 unique remote identifiers available Works with TIA 568A/B, USOC and ISDN wiring schemes CE Mark > Each Unit Includes CA7028 Meter Remote ID Two patch cords Four 1.5V AA Batteries User Manual Soft Carrying Case
-
$1.975
Locates underground energized and de-energized wires, cables and pipes Three testing modes for best accuracy – Passive Power (50 / 60 Hz), Passive Radio (RF), Active T-3500 signal generator with induction mode or directly connected to the cable with test leads or optional clamp Active Mode Depth measurement up to 16’ (4.9m) Semi-automatic gain control – fast signal location and control 33 kHz active frequency – best frequency for general locating Full featured transmitter – quality locating capability Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple-segment bar-graph digital display and audible indicators Rugged durable construction, weatherproof and drop resistant up to 5’ Complete instrument, ready for use with receiver, transmitter, connection cable, ground stake and ground cable Eliminates exploratory digging in parking lots or under floors for buried pipes and wires
-
$332
The AT-6010 offers the ergonomic form factor and safety of the AT-6020/6030 family at an affordable value. From homeowners and electricians to industrial technicians, the world
-
$537
The AT-6000-R Receiver detects the signal in wires and cables using two methods: active tracing method (with the Transmitter) and passive tracing method (without the Transmitter). In hard-to reach areas, the Receiver’s Tip Sensor can be used to trace wires in corners, tight spaces and junction boxes. The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal. Traces wires in walls, ceilings, floors and corners Locates breakers and fuses Pinpoints shorts and opens High resolution 2.5 TFT LCD color display Three Transmitter signal modes: High Signal mode for normal circuits, Low Signal mode for precision tracing in difficult areas, and Loop mode for closed loop de-energized circuits Four Receiver tracing modes Two auto-selected frequency modes for reliable tracing on energized and de-energized circuits Clamp-on attachment (CT-400) for inducing signal into wires without access to bare conductors (optional for AT-6020, included with AT-6030) One-year warranty > Applications Trace Energized and De-energized wires Identify breakers and fuses Non-contact voltage mode and passive tracing GFCI-protected circuit wire tracing Find breaks, openings, and shorts Trace wires in metal conduit Trace non-metallic pipes and conduits Trace shielded/underground wires Trace low voltage wires and data cables Sort bundled wires Map circuits using test leads connection Trace breakers on system with light dimmers CT-400 signal clamp (AT-6030 kit) to improves accuracy and performance when there is no access to bare conductors > Each Unit Includes AT-6000-R Receiver AT-6000-T Transmitter TL-6000 Test Lead and Accessory Kit CC-6000 Hard Carrying Case User Manual
-
$752
The AT-6000-R Receiver detects the signal in wires and cables using two methods: active tracing method (with the Transmitter) and passive tracing method (without the Transmitter). In hard-to reach areas, the Receiver’s Tip Sensor can be used to trace wires in corners, tight spaces and junction boxes. The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal. Traces wires in walls, ceilings, floors and corners Locates breakers and fuses Pinpoints shorts and opens High resolution 2.5 TFT LCD color display Three Transmitter signal modes: High Signal mode for normal circuits, Low Signal mode for precision tracing in difficult areas, and Loop mode for closed loop de-energized circuits Four Receiver tracing modes Two auto-selected frequency modes for reliable tracing on energized and de-energized circuits Clamp-on attachment (CT-400) for inducing signal into wires without access to bare conductors (optional for AT-6020, included with AT-6030) One-year warranty > Applications Trace Energized and De-energized wires Identify breakers and fuses Non-contact voltage mode and passive tracing GFCI-protected circuit wire tracing Find breaks, openings, and shorts Trace wires in metal conduit Trace non-metallic pipes and conduits Trace shielded/underground wires Trace low voltage wires and data cables Sort bundled wires Map circuits using test leads connection Trace breakers on system with light dimmers CT-400 signal clamp (AT-6030 kit) to improves accuracy and performance when there is no access to bare conductors > Each Unit Includes AT-6000-R receiver AT-6000-T transmitter CT-400 signal clamp for tracing wires with no direct connection access 12 rechargeable batteries 3 battery chargers Carrying case Instruction manual Warranty: 1-year manufacturer’s warranty
-
$64
The Amprobe BT-250 circuit breaker tester identifies circuit breakers on energized electrical systems. Automatic sensitivity adjustment and automatic polarity selection remove ambiguity about readings. The tester indicates the presence of a circuit breaker with a buzzer and an indicator light. The tester includes a transmitter, which is plugged into an electrical outlet, and a receiver, which is powered by a 9V battery. It is compatible with standard 90 to 280V AC and 40 to 70Hz breaker systems. The unit is UL listed and complies with European Standard EN61010B-1: 2001, CAT II, 280V. The BT-250 is designed for use by electricians and electrical contractors. Circuit breaker tracer identifies circuit breakers on energized electrical systems Automatic sensitivity adjustment and automatic polarity selection for accuracy Indicates circuit breaker with buzzer and indicator light Compatible with standard 90 to 280V AC 40 to 70Hz breaker system UL listed and complies with European Standard EN61010B-1: 2001, Category II 280V > Each Unit Includes BT-250 Circuit Breaker Tester (1) Transmitter (1) Receiver Carrying case Connection cable Light fixture adapter (1) 9V battery Instructions
-
$71
Amprobes BT-250/KIT Electric Installation Test Kit offers two electrical tools designed for use in residential and light commercial environments. The kit comes with the Amprobe BT-250 Circuit Breaker Tester and an ST-102B Receptacle Tester with GFCI. Kit comes with a transmitter, receiver, socket/test lead cable set with insulated alligator clips and a light fixture adapter. Identifies circuit breaker location Works on all electrical systems from 90 to 250V AC Perfect for office, residential and HVAC applications Test GFCI breakers for proper wiring and operation Easy to read light indicators show common wiring problems Confirm GFCI socket is wired for protection GFCI circuit trips to confirm tester is working Input Voltage Level: BT-250: 90 to 250V AC ST-102B: 110-125V AC Electrical CAT Rating: BT-250: CATII 250V
