WIKA

The model CPH7000 process calibrator is a precise, portable calibrator for the calibration and checking of analogue pressure measuring instruments, pressure transmitters and process transmitters. Furthermore, pressure switches can be checked and the switching point determined. With the CPH7000, not only can transmitters be checked, but also simulated and tested.DesignThe CPH7000 optionally features an integrated reference pressure sensor and also a manual pressure generation, with which pressures of -0.85 25 bar (12.3 360 psi) can be generated. It is possible to simultaneously power an external transmitter via the electrical module and to measure (or also simulate) its output signal.FunctionsThe calibrator offers the possibility to set calibration routines quickly and easily, but also to run preconfigured calibration routines and automatically save the measured values. Over the WIKA-Wireless interface, the completed calibration processes can be transmitted to a PC. This data can subsequently be evaluated and archived using WIKA-Cal software. Thus a completely paperless transmitter calibration is possible with just the CPH7000.AccuracyThe CPH7000 is compensated over a wide temperature range of 10 50 °C (50 122 °F) and achieves an accuracy of 0.025 % of span. In order to avoid intricate calculations, the measured values can also be displayed directly in customer-specific units. Min Pressure: -14.5 PSIG Max Pressure: 15 PSIG Accuracy: 0.025% 3 different measurements in one view Graphic display via bar graph Optional settable functions: Min, max, tare, tilter, alarm min., alarm max., men value, rate, sensor temperature Testing of pressure switches Remote communication via WIKA‐wireless Large graphic color touchscreen Datalogger with high measuring rate and large memory Accredited Calibration Certificate available Carrying case included

The model CPH7000 process calibrator is a precise, portable calibrator for the calibration and checking of analogue pressure measuring instruments, pressure transmitters and process transmitters. Furthermore, pressure switches can be checked and the switching point determined. With the CPH7000, not only can transmitters be checked, but also simulated and tested.DesignThe CPH7000 optionally features an integrated reference pressure sensor and also a manual pressure generation, with which pressures of -0.85 25 bar (12.3 360 psi) can be generated. It is possible to simultaneously power an external transmitter via the electrical module and to measure (or also simulate) its output signal.FunctionsThe calibrator offers the possibility to set calibration routines quickly and easily, but also to run preconfigured calibration routines and automatically save the measured values. Over the WIKA-Wireless interface, the completed calibration processes can be transmitted to a PC. This data can subsequently be evaluated and archived using WIKA-Cal software. Thus a completely paperless transmitter calibration is possible with just the CPH7000.AccuracyThe CPH7000 is compensated over a wide temperature range of 10 50 °C (50 122 °F) and achieves an accuracy of 0.025 % of span. In order to avoid intricate calculations, the measured values can also be displayed directly in customer-specific units. Min Pressure: -14.5 PSIG Max Pressure: 70 PSIG Accuracy: 0.025% 3 different measurements in one view Graphic display via bar graph Optional settable functions: Min, max, tare, tilter, alarm min., alarm max., men value, rate, sensor temperature Testing of pressure switches Remote communication via WIKA‐wireless Large graphic color touchscreen Datalogger with high measuring rate and large memory Accredited Calibration Certificate available Carrying case included

The model CPH7000 process calibrator is a precise, portable calibrator for the calibration and checking of analogue pressure measuring instruments, pressure transmitters and process transmitters. Furthermore, pressure switches can be checked and the switching point determined. With the CPH7000, not only can transmitters be checked, but also simulated and tested.DesignThe CPH7000 optionally features an integrated reference pressure sensor and also a manual pressure generation, with which pressures of -0.85 25 bar (12.3 360 psi) can be generated. It is possible to simultaneously power an external transmitter via the electrical module and to measure (or also simulate) its output signal.FunctionsThe calibrator offers the possibility to set calibration routines quickly and easily, but also to run preconfigured calibration routines and automatically save the measured values. Over the WIKA-Wireless interface, the completed calibration processes can be transmitted to a PC. This data can subsequently be evaluated and archived using WIKA-Cal software. Thus a completely paperless transmitter calibration is possible with just the CPH7000.AccuracyThe CPH7000 is compensated over a wide temperature range of 10 50 °C (50 122 °F) and achieves an accuracy of 0.025 % of span. In order to avoid intricate calculations, the measured values can also be displayed directly in customer-specific units. Min Pressure: -14.5 PSIG Max Pressure: 150 PSIG Accuracy: 0.025% 3 different measurements in one view Graphic display via bar graph Optional settable functions: Min, max, tare, tilter, alarm min., alarm max., men value, rate, sensor temperature Testing of pressure switches Remote communication via WIKA‐wireless Large graphic color touchscreen Datalogger with high measuring rate and large memory Accredited Calibration Certificate available Carrying case included

The model CPH7000 process calibrator is a precise, portable calibrator for the calibration and checking of analogue pressure measuring instruments, pressure transmitters and process transmitters. Furthermore, pressure switches can be checked and the switching point determined. With the CPH7000, not only can transmitters be checked, but also simulated and tested.DesignThe CPH7000 optionally features an integrated reference pressure sensor and also a manual pressure generation, with which pressures of -0.85 25 bar (12.3 360 psi) can be generated. It is possible to simultaneously power an external transmitter via the electrical module and to measure (or also simulate) its output signal.FunctionsThe calibrator offers the possibility to set calibration routines quickly and easily, but also to run preconfigured calibration routines and automatically save the measured values. Over the WIKA-Wireless interface, the completed calibration processes can be transmitted to a PC. This data can subsequently be evaluated and archived using WIKA-Cal software. Thus a completely paperless transmitter calibration is possible with just the CPH7000.AccuracyThe CPH7000 is compensated over a wide temperature range of 10 50 °C (50 122 °F) and achieves an accuracy of 0.025 % of span. In order to avoid intricate calculations, the measured values can also be displayed directly in customer-specific units. Min Pressure: -14.5 PSIG Max Pressure: 350 PSIG Accuracy: 0.025% 3 different measurements in one view Graphic display via bar graph Optional settable functions: Min, max, tare, tilter, alarm min., alarm max., men value, rate, sensor temperature Testing of pressure switches Remote communication via WIKA‐wireless Large graphic color touchscreen Datalogger with high measuring rate and large memory Accredited Calibration Certificate available Carrying case included

Additional benefit for CPH7000 models: Barometer Integratedbarometer,8501100mbarabs(12,316psiabs)

Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instrument’s memory. The communication with a PC is used to remotely control the unit and to download the calibration reports. The Pascal ET is the most advanced portable multifunction calibrator for the measurement and simulation of the following parameters: relative and absolute pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse. The calibrator Pascal ET has a new large colour touchscreen display with a new intuitive and user-friendly interface, that allows an easy and fast configuration of the calibrator. The availability of ATEX approval II 2G Ex ib IIC T4 Gb Tamb: -10 50 °C (14 122 °F) expands the possible applications of this calibrator into hazardous areas (only for Pascal ET/IS). Even in the ATEX version the DC 24 V voltage supply for external transmitters is available. The calibrator has four measurement channels and is thus capable to carry out up to four simultaneous measures. For more flexibility on on-field calibrations, the Pascal ET has an on-board memory for data storage that allows the evaluation of logged measuring values and calibration reports. In laboratory applications the real-time communication allows the remote control of the Pascal ET from a PC. Instrinsically safe HART® module Measurement and simulation of the following parameters: pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse Large colour display with touchscreen with new intuitive and user-friendly interface Integrated data logger and calibration function

Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instrument’s memory. The communication with a PC is used to remotely control the unit and to download the calibration reports. The Pascal ET is the most advanced portable multifunction calibrator for the measurement and simulation of the following parameters: relative and absolute pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse. The calibrator Pascal ET has a new large colour touchscreen display with a new intuitive and user-friendly interface, that allows an easy and fast configuration of the calibrator. The availability of ATEX approval II 2G Ex ib IIC T4 Gb Tamb: -10 50 °C (14 122 °F) expands the possible applications of this calibrator into hazardous areas (only for Pascal ET/IS). Even in the ATEX version the DC 24 V voltage supply for external transmitters is available. The calibrator has four measurement channels and is thus capable to carry out up to four simultaneous measures. For more flexibility on on-field calibrations, the Pascal ET has an on-board memory for data storage that allows the evaluation of logged measuring values and calibration reports. In laboratory applications the real-time communication allows the remote control of the Pascal ET from a PC. Instrinsically safe Measurement and simulation of the following parameters: pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse Large colour display with touchscreen with new intuitive and user-friendly interface Integrated data logger and calibration function

Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instrument’s memory. The communication with a PC is used to remotely control the unit and to download the calibration reports. The Pascal ET is the most advanced portable multifunction calibrator for the measurement and simulation of the following parameters: relative and absolute pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse. The calibrator Pascal ET has a new large colour touchscreen display with a new intuitive and user-friendly interface, that allows an easy and fast configuration of the calibrator. The availability of ATEX approval II 2G Ex ib IIC T4 Gb Tamb: -10 50 °C (14 122 °F) expands the possible applications of this calibrator into hazardous areas (only for Pascal ET/IS). Even in the ATEX version the DC 24 V voltage supply for external transmitters is available. The calibrator has four measurement channels and is thus capable to carry out up to four simultaneous measures. For more flexibility on on-field calibrations, the Pascal ET has an on-board memory for data storage that allows the evaluation of logged measuring values and calibration reports. In laboratory applications the real-time communication allows the remote control of the Pascal ET from a PC. HART® module Measurement and simulation of the following parameters: pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse Large colour display with touchscreen with new intuitive and user-friendly interface Integrated data logger and calibration function