Showing 1–9 of 53 results
-
$1.547
Accurate, in accordance with CTL voltage and time specifications. Disconnects input test voltage at positive or negative peak, normal and reversed polarity Tests Line-Ground, Line-Neutral and Neutral-Ground. Micro-controller Technology, one button test, easy setup, LCD display indicates test results. Maximum Rated Test Current 8A, 15A optional. Ergonomically designed for safety, speed and efficiency. Designed for product development, production and laboratory use. Rugged construction that can withstand a 6 drop with no damage. Cables, manual and calibration certificate included. One year warranty.
-
$709
Pairing with a Compliance West Hipot Tester and our HTT-1R Function Checker makes a complete TUV Production Test Package. Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. AC output. Constant current delivers 25 amps to any ground circuit with resistance of 0 to 0.1ohm. Virtual voltage sense circuit. ignores resistance of test leads for accuracy. NEMA 5-15 Receptacle for plugging in the device being tested. Universal receptacle available for testing products with International plugs, order Option 30AC-T-W. 0.1ohm calibration resistor mounted on rear panel. Designed for TUV, NEMKO and CE Safety Agency production line testing, including IEC601.
-
$1.752
AC output constant current delivers up to 200 amps at up to 5 volts for ground resistance measurements of up to 12.5 milliohms. Current is adjustable from the front panel. Analog meter indicates output current and voltage. Four wire voltage measurement for accuracy. Rear panel outputs for safety. Test leads included. Calibrated to ANSI Z540 Standards.
-
$1.949
HT-10KVPAC Hipot / Dielectric Tester with microcontroller technology for ease of use. AC output 0-10,000Vac @ 10mA. Ships complete with cables, manual, and Calibration Certificate. Made in the USA. Features HT10000P AC: AC output to 10000 Volts. Delivers 1 through 8 milliamps. Custom outputs to 25 mA. Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures. Rear panel adjustments, leakage limit, ramp time, test time and voltage. Ergonomic design for safety and ease of use. High voltage output jack. Automatic voltage ramp-down circuit eliminates residual voltage. Designed for product development and laboratory use. High efficiency design, low power consumption. All test leads included. Calibrated to NIST standards. 1 year warranty HTT-1 and HTT-1RHipot and Ground Continuity Function Checker Compatible
-
$8.276
HT-10KVac-100mA Hipot Tester, 0-10KVac @ 100mA. Ships complete with cables, manual and Calibration Certificate. Made in the USA. AC output: up to 10,000 V. Microcontroller Technology, one button test, easy to setup, LEDs indicate test progress. Upon failure, buzzer sounds and testing is terminated. Output voltage, leakage current limit and test duration are controlled from the front panel. Arc detection and test timer are defeatable. Separate arc detection circuitry. Main shutdown switch on front panel for safety.
-
$2.530
HT10000P AC: AC output to 10000 Volts. Delivers 1 through 8 milliamps. Custom outputs to 25 mA. HT10000P DC: DC output to 14000 Volts. Delivers 1 through 5 milliamps. Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures. Rear panel adjustments, leakage limit, ramp time, test time and voltage. Ergonomic design for safety and ease of use. High voltage output jack. Automatic voltage ramp-down circuit eliminates residual voltage. Designed for product development and laboratory use. High efficiency design, low power consumption. All test leads included. Calibrated to NIST standards. 1 year warranty HTT-1 and HTT-1RHipot and Ground Continuity Function Checker Compatible
-
$799
High precision leakage current, duration and ground continuity settings. Allows no load setup of leakage current and test dwell times. Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing. Leakage currents can be set from 1-20 mA AC in 0.1mA increments. Dwell times can be set from 1-60 seconds in 1 second increments. Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed. Small and light. 9.25 wide x 4.75 high x 10 deep. 11 lbs. But rugged enough to test manufactured housing. Ground continuity check is defeatable for testing two-wire products. Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed! J2 and J3 cords allow connection of pigtail power leads. Simple test outcome judgement. Green lights mean pass red lights mean fail. Failing tests sound a buzzer as well. Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance. Operation Instructions are printed on the rear panel for easy reference. In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems. RED lights and a buzzer leave no question if a failure has occurred. Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™. Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
-
$3.231
AC output up to 20,000 V Leakage current up to 5.0 mA. Microcontroller technologies, one button test, easy to setup, LEDs indicates test in progress. Upon failures buzzer sounds and testing is terminated. Output voltage, Leakage current and test duration are controlled in the front panel. Test timer is defeatable. HV connector output with a quarter turn twist lock. Designed for product development and laboratory use. One year calibration cycle. Main shutdown switch in front panel for safety.
-
$2.941
DC output: up to 25,000 V. Microcontroller Technology, one button test, easy to setup, LEDs indicate test progress. Upon failure, buzzer sounds and testing is terminated. Leakage current limit, voltage ramp and test duration are controlled from the rear panel. Voltage ramp, arc detection and test timer are defeatable. Separate arc detection circuitry.
