Showing 10–18 of 19 results
-
$1.333
The MIC-5010 is a portable, rugged, easy-to-use, 5 kV class insulation test meter. The MIC-5010 has a wide measurement range, selectable test voltages, and excellent safety features. Measurement to 15 TΩ User-selectable test voltage any from 50 to 1,000 V (with 10 V resolution) and 1,000 to 5,000 V (with 25 V resolution) Continuous indication of measured insulation resistance or leakage current Audio beeps every five-second periods to indicate measurement progress Indication of actual test voltage during measurement 1.2 mA and 3 mA test current Step voltage insulation resistance measurement (SV) Selectable test times (T1, T2 , T3 from 1 to 600 seconds) to measure one or two absorption coefficients Adjustable measuring time to 99 59’ Polarization index (PI) and dielectric absorption ratio (DAR) measurements Dielectric Discharge calculation (DD) High-noise immunity, digital filters function for measurements in high noise environment (10 s, 30 s , 60 s) Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 Adjustable limits for measured resistance RISO and RCONT Measurement of capacitance during the measurement of RISO DC and AC voltage measurement in the range of 0 to 600 V Meter conforms to EN 61557 > Safety First Features: CAT-IV 600V, CAT-III 1000V Automatic discharge of tested object after the insulation resistance measurement completes to remove high-voltage charge remaining due to cable capacitance Protection against measuring live objects, measurement will not proceed Measurements with test leads up to 66 ft / 20 m length > Construction: Backlit keyboard and display Rugged IP 54 case Protected from water spray from any direction Power supply from battery packs, low battery warning indicator, built-in fast charger > Memory Features: 990 cells of memory (11,880 records) to save test results Data transmission to a PC via USB cable
-
$2.698
The MMR-650 is a compact, portable microohmmeter for measuring very low resistances of resistive and inductive objects. This product is designed to measure welded and soldered connections, equipotential bondings, earthing conductors, contacts, bolted connections, windings of motors and power transformers, including amorphous core transformers. The MMR-650 can be also deployed on production lines in manufacturing industries. Its rugged enough for field work in power plants and maintenance yards, it comes with an IP54 rating, and will perform well in extreme temperatures (-10°C to 50°C). Sonel has made several design innovations with the MMR-650, it is a high-performance measuring device with a modern user interface, and advanced data management to store results. It can be connected to a PC or network via WIFI for creating reports. An optional printer can print labels to identify test items, or print results in the field.
-
$1.639
THE MRU-200-GPS OFFERS A VARIETY OF MEASUREMENT METHODS FOR GROUND RESISTANCE AND RESISTIVIY. The MRU-200-GPS is the only meter which can perform all ground resistance measurement methods, 2-pole, 3-pole, 4-pole, and impulse earth impedance methods. Ground resistance using auxiliary electrodes, or with electrodes and clamp for measurements in the presence of multiple ground paths Ground resistance using double clamps when it is not possible to use auxiliary electrodes Impulse ground resistance without disconnecting measured grounding Soil resistivity using Wenner method Leakage current using current clamp or flexible Rogowsky probe Measurement of continuity of equipotential bonding and protective conductors (meets IEC 60364-6-61:2000 section 6.12.2) with auto-zero function and 200 mA current Ground resistance measurement, with 2-pole, 3-pole, or 4-pole methods Leakage current measurement Selective measurement with clamp excludes influence from parallel ground points No opening of rusted conductors needed Impulse ground resistance measurement at 4/10 µs, 8/20 µs, or 10/350 µs Two clamps resistance measurement method without auxiliary test probes GPS coordinates of measurement location are stored with test results Resistance measurement of auxiliary electrodes Measurement of interference voltage and interference frequency Measurement in the presence of interference voltages at 162/3 Hz, 50 Hz, 60 Hz, and 400 Hz Automatic or manual selection of frequency of measuring signal Selection of maximum measuring voltage (25 V and 50 V) Distance between the electrodes noted in meters (m) and feet (ft) Memory storage for 990 measurements Calibration information of test clamp(s) Real-time clock USB interface for PC connection Internal battery with indication of state of charge Backlit LCD graphic display Double insulated meets IEC 61010-1 and IEC 61557 standards CAT IV 300 V
-
$577
The Sonel MRU-30 is a rugged, portable tool for earth ground resistance measurements. Tests can be performed using the 2-pole, 3-pole, 4-pole, or 3-pole with current clamp methods. Additionally, the MRU-30 can perform the current clamp method using two clamps (one to generate, and one to measure current) for situations when test electrodes cant be used. The MRU-30 provides measurements of soil resistivity, continuity measurement of protective and equipotential conductors, interference voltages, and with current clamp leakage current. Robust and weatherproof (IP65) protection against ingress of dust and water Ergonomic casing small, light-weight, convenient for carrying and field work Built-in rechargeable battery can be recharged from an outlet or 12V Car socket Clear on-screen display to view results Safety alerts user of possible dangers and irregularities before and after the measurement User can use choose between measurement methods Test leads, test electrodes, and power adapter are included
-
$13.338
The SRP-50k0-100GO calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters. The resistance set by the calibrator can be maintained for long periods under external direct voltage up to 2500 V, provided that the current in the measuring circuit does not exceed 1.5 mA. The required resistance is set by the user using the calibrators touch keypad, or via an external PC application. The required value is set automatically thanks to the switching of a precise resistance matrix. A controlling processor calculates the required combination of resistors, ensuring adequate resistance precision. Software The SRP software is used to connect the SRP-50k0-100GO calibrator with a PC. The software is easy to use and is a useful tool for testing of devices by means of the calibrator. The calibrator connects to a computer via the USB port. Remote control of the calibrator Create and save the automatic programs to check the tested devices Set the keypad lock and time to sleep mode Change the display brightness and keypad tones Software language selection Calibrator software update from the PC via the USB interface > Each Unit Includes CD with the SRP software 1.8 m test lead with 5kV banana plugs, blue 1.8 m test lead with 5kV banana plugs, red 2.2 m shielded cable with banana plugs, black Operating manual Power cord
-
$10.499
The SRP-50k0 10GO calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters. The resistance set by the calibrator can be maintained for long periods under external direct voltage up to 2500 V, provided that the current in the measuring circuit does not exceed 1.5 mA. The required resistance is set by the user using the calibrators touch keypad, or via an external PC application. The required value is set automatically thanks to the switching of a precise resistance matrix. A controlling processor calculates the required combination of resistors, ensuring adequate resistance precision. Software The SRP software is used to connect the SRP-50k0-10GO calibrator with a PC. The software is easy to use and is a useful tool for testing of devices by means of the calibrator. The calibrator connects to a computer via the USB port. Remote control of the calibrator Create and save the automatic programs to check the tested devices Set the keypad lock and time to sleep mode Change the display brightness and keypad tones Software language selection Calibrator software update from the PC via the USB interface > Each Unit Includes: CD with the SRP software 1.8 m test lead with 5kV banana plugs, blue 1.8 m test lead with 5kV banana plugs, red 2.2 m shielded cable with banana plugs, black Operating manual Power cord
-
$9.370
The SRP-50k0-5TO calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters. The resistance set by the calibrator can be maintained for long periods under external direct voltage up to 5000 V, provided that the current in the measuring circuit does not exceed 3 mA. The required resistance is set by the user using the calibrators touch keypad, or via an external PC application. The required value is set automatically thanks to the switching of a precise resistance matrix. A controlling processor calculates the required combination of resistors, ensuring adequate resistance precision. Software The SRP software is used to connect the SRP-50k0-5T0 calibrator with a PC. The software is easy to use and is a useful tool for testing of devices by means of the calibrator. The calibrator connects to a computer via the USB port. Remote control of the calibrator Create and save the automatic programs to check the tested devices Set the keypad lock and time to sleep mode Change the display brightness and keypad tones Software language selection Calibrator software update from the PC via the USB interface > Each Unit Includes: CD with the SRP software 1.8 m test lead with 5kV banana plugs, blue 1.8 m test lead with 5kV banana plugs, red 2.2 m shielded cable with banana plugs, black Operating manual Power cord
-
$795
The TDR-410 is a Time-Domain-Reflectometer (TDR) that detects breaks, short circuits, moisture damage, and changes in impedance of cables, and locates fault position. The backlit display gives automatic indication of the type of fault and the distance to the fault. Power cables Copper telecom cables Coaxial cables Wiring infrastructures Automatic or manual operation modes Scan automatically or manually trigger Single measurements triggered manually Continuous scanning operation Automatic fault location (AFL) Range and sensitivity can be set manually or automatically Maximum length of cable up to 4000 m / 14000 ft (2.5 miles) “Dead zone” measurement limited to 0.5 m / 1.64 ft Adjustable impedance matching Propagation coefficient adjustment 1% to 99% 2.5” backlit LCD screen Waterproof, IP 54 / NEMA 3 rugged case construction Small size and weight Low power usage – up to 30 hours of operation on 4 AA batteries
-
$555
Type of insulation: double, according to EN 61010 1 Measurement category: CAT III 600 V acc. to EN 61010 1 Protection class acc. to EN 60529: IP42 Rated phase-to-phase voltage range: 120 to 690 V AC Maximum operation phase-to-phase voltage: 760 V AC Frequency range: 10 to 70 Hz Operating temperature: 14 F to 113 F / -10 to 45°C Storage temperature: -4 F to 140 F / -20 to 60°C Power supply: from the tested electrical installation, up to 15 min for max. voltage Dimensions: 5.1 x 2.8 x 1.4 / 130 x 70 x 35 mm Weight (without test leads): approx. 0.44 lbs / 200g
