Showing 73–81 of 169 results
-
$1.949
Measurement range is 0.275 to 0.5 and 6.925 to 12.7 mm, precise to 0.00005 or 0.001 mm, and accurate to or 0.0001 TiN-coated measuring contact points for durability and impact resistance Contact point geometry allows the instrument to measure to the bottom of blind holes Easy-to-read LCD for convenient recording of measurement with useful functions, including presetting, zero/ABS, data hold, and battery replacement alarm Set includes three complete display units, two setting rings, and fitted wooden case
-
$2.052
Measurement range is 0.5 to 1.0 and 12.7 to 25.4 mm, precise to 0.00005 or 0.001 mm, and accurate to or 0.00015 TiN-coated measuring contact points for durability and impact resistance Contact point geometry allows the instrument to measure to the bottom of blind holes Easy-to-read LCD for convenient recording of measurement with useful functions, including presetting, zero/ABS, data hold, and battery replacement alarm Set includes three complete display units, two setting rings, and fitted wooden case
-
$2.359
TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole (up to 100mm/4models) Large LCD readout Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm With Ratchet Stop for constant force Resolution: 0.001mm or .00005/0.001mm (over 5 models: .0001/0.001mm) Contact point:TiN-coating Measuring method: Three-point method Display: LCD Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 8 months under normal use Range 1-2in 25.4-50.8mm Indv Range 1.2 in DIA.,1.6 in DIA Setting Rings Incl. 1.2 in DIA.,1.6 in DIA With TiN-coated contact points > Each Unit Includes Case
-
$2.616
TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole.(up to 100mm/4models) Large LCD readout. Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm. With Ratchet Stop for constant force. Supplied in fitted plastic case. Range 2-3in 50.8-76.2mm Indv. Range 2-2.5 in,2.5-3 in Setting Rings Incl. 2.5 in DIA. Remarks with TiN-coated contact points
-
$3.129
TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole.(up to 100mm/4models) Large LCD readout. Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm. With Ratchet Stop for constant force. Supplied in fitted plastic case. Range 3-4in 76.2-101.6mm Indv. Range 3-3.5 in,3.5-4 in Setting Rings Incl. 3.5 in DIA. Remarks with TiN-coated contact points
-
$564
The minimum value holding function provides the easy detection of hole diameter Up to three sets of master value and upper/lower tolerance value can be memorized An analog bar indicator is integrated to enhance the intuition in reading GO/±NG judgment is performed by setting the upper and lower tolerances Up to four rods (250mm or 500mm) can be used Accuracy: Wide Range: 0.003mm / .00012†Narrow Range: 0.002mm / .00008†Resolution: .00005 / 0.001mm Display: LCD Battery: SR44 (1 pc.) (938882) Battery life: Approx. 9 months for normal use Dust/Water protection level: Conforming to IP53 Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only), Data output, GO/±NG tolerance judgment Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error Range 1.8-4in 45-100mm Probe 6 in 152.4mm
-
$615
The minimum value holding function provides the easy detection of hole diameter. Up to three sets of master value and upper/lower tolerance value can be memorized. An analog bar indicator is integrated to enhance the intuition in reading. GO/±NG judgment is performed by setting the upper and lower tolerances. Up to four rods (250mm or 500mm) can be used.
-
$615
The minimum value holding function provides the easy detection of hole diameter. Up to three sets of master value and upper/lower tolerance value can be memorized. An analog bar indicator is integrated to enhance the intuition in reading. GO/±NG judgment is performed by setting the upper and lower tolerances. Up to four rods (250mm or 500mm) can be used.
-
$872
Interchangeable anvil is attached to a micrometer head for accurate dimensional setting. Wide measuring range with sub-anvils. Carbide ball contact point for durability. Extension rods (optional) can be attached for measuring deep holes. Range 24-32in Head Travel 2in Sub Anvil 2in,4in With 2923SB-10 Grad .0001in
