Showing 145–153 of 169 results
-
$1.231
Tin-Coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole Large LCD digits of 85mm height for error-free reading 330-degree rotatable display unit for easy reading at any angle Go/No-Go judgment function
-
$2.205
Total measurement range of 2 to 4 (50.8 to 101.6 mm) SPC data output for recording and storing measurements on a computer LCD offers quick and error-free measurement reading with both inch and metric modes Three-point contact for detection of lobing or triangular form error TiN-coated contact points provide durability and impact resistance
-
$2.462
Total measurement range of 0.275 to 0.5 (6.985 to 12.7 mm) Accurate to or 0.00025 (0.006 mm) Set includes three complete display units and two setting rings Three-point contact for detection of lobing or triangular form error TiN-coated contact points provide durability and impact resistance
-
$615
Range10-200mm Accuracy 0.10mm Resolution 0.01mm Mass 482g Specially designed to measure the distance between two centers or the distance from an edge to center. Provided with jaws on the back of the slider, measurements can be read easily by looking down. Direct reading of pitch measurements is available due to the offset value setting function. With SPC data output. Supplied fitted in wooden case.
-
$1.179
If using only one length repeatedly it is a good idea to purchase discrete gage blocks Each gage block is supplied with a certificate of inspection Each grade K gage block of ASME standard is specially supplied with a certificate of calibration which certificates that the gage block was manufactured through interferometry
-
$1.949
Each gage block is supplied with a certificate of inspection Grade K gage block of ASME standard is specially supplied with a Certificate of Calibration which certificates that the gage block was manufactured through interferometry
-
$769
If using only one length repeatedly it is a good idea to purchase discrete gage blocks Each gage block is supplied with a certificate of inspection Each grade K gage block of ASME standard is specially supplied with a certificate of calibration which certificates that the gage block was manufactured through interferometry
-
$1.898
Each gage block is supplied with a certificate of inspection Each grade K gage block of ASME standard is specially supplied with a certificate of calibration which certificates that the gage block was manufactured through interferometry
-
$5.130
High-Accuracy Non-contact Excellent linearity: down to /-0.3 microns High speed scanning capable: 3200 scans per second Various ranges available for selecting the best laser for your application Statistical calculation mode