Showing 46–54 of 254 results
-
$3.915
The Megger 550005B is a single phase TTR Test Set which measures excitation current and turns ratio of windings for potential, power and current transformers. Megger Model # 550005B High Sensitivity—Measures Turn Ratios from 0.0000:1 to 129.999:1 Measures Excitation Current from 0 to 1A Three Separate Analog-Meter Displays Identifies Incorrect Connections, Opens, Shorts, Internal Faults, Tap-Changer Defects Reliable Hand-Crank Operation > Each Unit Includes Cable Assembly Two C-Clamps for X (low voltage) Windings, 10 ft. (3 m) Two Spring Clips for H (high voltage) Windings, 13 ft. (4 m) Operating Instructions
-
$914
The Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Megger Model# 560060 Max. Voltage: 600V Frequency: 50/60 Hz Ensures Proper Phase Hookup in One Easy Test Determines Rotation Direction, Phase Sequence, Polarity 7.5 x 7.5 x 9 HWD/3.5 lbs. > Each Unit Includes Attached Test Leads Line, 6ft (1.8m) Motor, 4ft (1.2m) Instruction Manual Alkaline D Battery Fuses, standard 250V, 3A
-
$1.282
The Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Therefore, the test set eliminates the need for temporary connections that can be time consuming, costly and quite hazardous, particularly where many large, high-voltage motors are involved. Megger Model # 560400 Max. Voltage: 600V Frequency: 25, 50, 60, 400 Hz Ensures Proper Phase Hookup in One Easy Test Determines Rotation Direction, Phase Sequence, Polarity 7.5 x 7.5 x 9 HWD/3.5 lbs. > Each Unit Includes Attached Test Leads Line, 6ft (1.8m) Motor, 4ft (1.2m) Instruction Manual Alkaline D Battery Color Coded 36 Inch Leads Carrying Case
-
$1.796
The Ultrasonic Leak and Corona Detector is a low-cost, portable system that receives air-borne ultrasonic signals, converts them to the audible range, amplifies them and displays the output visibly on a meter and audibly through a speaker or headset. The system is designed for locating gas leaks and electrical corona sources, all of which emit strong ultrasonic signals that are inaudible to the unaided human ear.
-
$374
Insulation & Ground Testers Super-Deluxe Kit Super-Deluxe Kit for 250202, DET5/4R, DET5/4D & DET62D > Each Unit Includes Carrying Case Four Galvanized Spikes(L shape) 10mm dia. x 350mm 30m of cable on a winder 50m of cable on a winder Two 3m leads complete with connectors and clips Hammer
-
$96
The Megger 6380-138 case is used to carry and protect a Megger DLRO10 or DLRO10X digital low resistance microhmmeter (sold separately). The padded canvas case has a shoulder strap and holds the instrument and all standard accessories. The 6380-138 is used to carry and protect a DLRO10 or DLRO10X microhmmeter, which is used to conduct resistance tests of electrical equipment. Case used to carry and protect a digital microhmmeter Works with a Megger DLRO10 or DLRO10X digital microhmmeter (sold separately) Padded case holds instrument and all standard accessories
-
$516
Lightweight, battery operated Locates, traces and measures depth of buried power cables Two sensitivity ranges Peak and null location methods
-
$1.381
The Megger 656621 AccuTrace cable route tracer is a cable tracer for locating, tracing, and measuring the depth of energized electrical cables. The tracer includes a transmitter and separate receiver. The transmitter sends an energized signal down a line either by magnetic induction, which does not require direct contact with the cable, or through a direct conductive connection. Signal strength and proximity to the cable are indicated visually on the receiver or audibly. Cable tracer for locating, tracing, and measuring the depth of buried energized electrical cables Transmitter can energize line either by magnetic induction or by conductive connection with metallic cable Signal strength indicated visually or audibly with adjustable volume that can be heard without headphones Distance range of 1.5m to 5km (5 ft. to 3 mi.) and buried up to 9m (30 ft.) deep Both peak- and null-tracing modes can be used on same trace for speed and accuracy
-
$691
Energized and De-energized Line Tracing Conductive or Inductive Coupling “Locate Mass” Function to Locate Buried Metal Masses Such as Manhole Covers Peak and Null Detection Capabilities > Each Unit Includes Four “C” Alkaline Batteries Protective Tote Bag Operating Instructions
