Megger

Offering CAT IV, the Megger MIT1025 10-kV Insulation Resistance Tester is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than its predecessor making it even easier to carry and store. Save over $735 with the Megger MIT1025 VIP Kit Limited Time Offer FREE Megger MIT410/2 Smaller size and lighter weight allows easier transport and use without compromising performance. High measurement range enables installation testing and long-term trending of higher value apparatus. Unique dual case design allows for fire-retardant protection while maintaining ruggedness. High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy. Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability. Operate from line power when battery fully discharged (charges while operating). Two and one-half hour full battery charge time (one half hour charge for one hour testing) significantly increases productivity. Up to six hours continuous testing (5 kV) on a single battery charge. Industry best guard terminal performance to insure highest accuracy of measured values. Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures. Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages. CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications. Large LCD with automatic backlight. Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments. High altitude operation up to 3000 m while maintaining CATIV 600 V rating. Rotary switch operation for easy, intuitive field use. Field replaceable battery > Each Unit Includes FREE MIT410/2 User guide CD Power lead 10 ft (3 m) leadset x 3, medium insulated clips 10 ft (3 m) 3 m leadset x 3, large insulated clips

Save over $490 with this VIP Kit! (FREE transit case included) Insulation resistance up to 30 TO @ 15 kV, 20 TO @ 10kV, 10 TO @ 5 kV IR, Timed IR, DAR, PI, DD, SV and ramp diagnostic tests High current 3 mA short circuit current High noise immunity 3mA (5kV and 10kV) 6mA (15kV) of noise rejection Li-ion battery up to 6 hrs continuous testing @ 5 kV with a 100M load, battery meets IEC 62133 Safety rating: CATIV 600 V to 3000 m (5 kV, 10 kV) CATIV 1000 V to 3000 m (15 kV) Large LCD display with backlight Dedicated voltmeter function (30 V to 660 V) Advanced memory, on screen recall and real time clock for date/time stamped results Download of on-board results via USB interface PowerDB Lite asset management software Recorded temperature (measured by independent instruments) can be saved with test result PowerDB Lite asset management software supplied > Each Unit Includes FREE transit case (Over a $490 value!!!) Power lead USB cable PowerDB Lite software Product Information CD

The Megger MIT200 series digital/analog handheld insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. Insulation testing to 1000 MW Continuity testing at 200 mA down to 0.01W Live Circuit Warning (voltage display) and Test Inhibit Digital/Analog Display Alkaline or Rechargeable Batteries –10ºC to 55ºC Operating Temperature CATIII 600 V Conforms to EN61557-1, IEC 61010-1 3 Year Warranty Calibration Certificate > Each Unit Includes Lead set with prods and clips Carrying Case

The Megger MIT200 series digital/analog handheld insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing The MIT200 series will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments. The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems. Their small size and light weight make them ideal for those engineers that need to carry them for extended periods. Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Dual digital display with analog arc function to replicate response of analog meters Measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms Safety rated to European Standard EN61010-1 Category III, 600V and IP40 rated for protection against accidental contact with hazardous parts

Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Dual digital display with analog arc function to replicate response of analog meters Measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms Safety rated to European Standard EN61010-1 Category III, 600V and IP40 rated for protection against accidental contact with hazardous parts

The MIT2500 insulation and continuity tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed. The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be “dialed in”. This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test. Designed for Motor and Cable Testing, Specialist Applications and Electrical Testing Markets Insulation Testing to 2.50 Kv (New) 200 GΩ Measurement Range at ≥ 1.00kv Guard Terminal for Testing of Equipment With High Surface Leakage Issues Stabilized Insulation Test Voltage to -0% 2% ±2V Variable Insulation Test Voltage from 50V to 999 V in 1V Steps Variable Insulation Test Voltage from 1.00 Kv to 2.50kv in 10V Steps Single Range, Fast Continuity Testing from 0.01Ω to 1MΩ 0.01mv to 600V TRMS AC and DC Voltage Measurement Test Result Storage and Bluetooth® Downloading Live Circuit Detection and Protection CATIV 600V Applications & IP54 Environmental Protection Rechargeable Options for Mains and Car Charging > Each Unit Includes Red/Black/Blue 1 kV silicone test leads with probes and clips 1007-781 Red/Black/Blue 2.50 kV silicone test leads with clips 1007-637 Owners Information CD download at www.megger.com Batteries 6 x AA Alkaline 1002-753 Hard carry case 2006-649 Download manager software