Showing 10–18 of 254 results
-
$1.518
Megger 230315 3 kV AC High-Pot Tester is designed for safety and ease of operation, and readily adapt to development, maintenance or production testing. It features a front-panel, NEMA 5-15R three-prong output receptacle. Booted, alligator-clip output and return probes are also supplied with Megger 230315. Megger Model # 230315 0-3 kV AC Applied Test Voltage Front-panel adjustable leakage current trip from 0.3 to 12 mA Ground Continuity Check of 3-Wire Devices One-Second or Continuous Testing Automatic Failure Shutdown, Zero Start/Reset 8.11 x 9 X 8.4 HWD 12.5 LBS Recessed high-voltage connections Front-panel NEMA 5-15R three-prong receptacle on ac models Zero start/reset in event of failure Meets UL 120-kΩ requirement > Each Unit Includes Test Leads Input Power Cord (17032) Instructions
-
$1.518
Ground continuity check of three-wire devices with high-voltage interlock Front-panel adjustable leakage current trip from 0.3 to 12 mA One-second or continuous testing Automatic failure shutdown, with visual and audible alarms Recessed high-voltage connections Front-panel NEMA 5-15R three-prong receptacle Zero start/reset in event of failure Meets UL 120-k½ requirement Available in alternate configurations: ?230315 0-3 kV AC applied test voltage 230425 0-4 kV AC and 0-5 kV DC applied test voltage > Test probes with alligator clips for ac models one Cat. No. 25507 high-voltage probe Cat. No. 25149 complete assembly, 4 ft [1.2 m] Power cord 17032 Instruction manual
-
$1.902
Front-panel adjustable leakage current trip from 0.3 to 12 mA One-second or continuous testing Automatic failure shutdown, with visual and audible alarms Recessed high-voltage connections Front-panel NEMA 5-15R three-prong receptacle on ac models Zero start/reset in event of failure Meets UL 120-k½ requirement > Each Unit Includes Test probes with alligator clips for ac models Cat. No. 25507 high-voltage probe Cat. No. 25136 return probe Cat. No. 25149 complete assembly, 4 ft [1.2 m]
-
$752
The Megger 241005-7 series duplex test lead with gold-plated Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. Megger Catalog # 241005-7 Duplex Kelvin Clips (2) .5 (1.3 cm) old Plated 10A Max Test Current 7 Ft
-
$551
The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35 (9 mm) between the current and potential probe tips on the duplex hand spikes. Megger Model # 242002-18 Fixed-Point, Heavy-Duty Hand Spike Terminations, 10A Max. Test Current Duplex Test Leads 10A Maximum Current 18ft Long
-
$658
The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. Duplex Test Leads Heavy-Duty Fixed Point Hand Spikes 10 A 30 ft
-
$466
Digital Low Resistance Ohmmeters (DLRO®) are a family of highly accurate instruments that provide a simple, practical and reliable means of making low-resistance tests in the field. They also are ideal for production quality control. They operate on the four-wire measurement principle, thus eliminating lead and contact resistances. Megger Model # 242002-7 Heavy Duty Fixed Point Hand Spikes
-
$577
The Megger 242003-7 duplex test lead with replaceable needlepoint tips is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, and 247002 digital low-resistance ohmmeters. This 7(2 m) long duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The lead has needlepoint tips on both the current and potential leads that are for use with small and hard-to-reach conductors and can be replaced when they show signs of wear. 10A Max. Test Current
-
$414
The Megger 242002 series duplex test lead with C-clamp is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. Terminations are 2 (5 cm) Heavy-Duty C Clamps, 10 A Max. Test Current
