Hioki

±0.16% accuracy & 0.01µohm resolution performance in automated systems Superb repeatable measurement accuracy Provide advanced contact-check, comparator, and data export functions It is intuitive user interface and strong noise immunity are suitable for use in automated systems Measurement method Four-terminal, constant-current DC Resistance range 10 mohm (Max. 12.00000 mohm, 0.01 µohm resolution) to 1000 ohm range (Max. 1200.000 ohm, 1 mohm resolution), 7 steps Display Monochrome graphic LCD 240 × 64 dot, white LED backlight Measurement accuracy [at 10 mohm range, with SLOW mode, average 16 times settings] ±0.060 % rdg. ±0.001 % f.s. Testing current [at 10 mohm range] 1 A DC to [at 1000 ohm range] 1 mA DC Open-terminal voltage 20 V DC max. Note: Voltage when not measuring is 20 mV or less, with current mode set at PULSE and Contact Improver Setting set at OFF/PULSE (measured with a voltmeter having 10 Mohm) Sampling rate FAST, MEDIUM, SLOW, 3 settings Integration time [at 10 mohm range, default value] FAST 2.0 ms, MED 5.0 ms, SLOW 1 PLC, Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period) Other functions Comparator (compare setting value with measurement value), Delay, OVC (offset voltage compensation), Average, Measurement fault detection, Probe short-circuit detection, Improve contact, Current mode setting (A pulse application function that applies current only during measurement), Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,. Interface External I/O, RS-232C, Printer, GP-IB (Model RM3543-01) External I/O Trigger, Hold input, Comparator output, Settings monitor terminal, Service power output 5V, 12V, etc. Power supply, consumption 100 to 240 V AC, 50/60 Hz, 40 VA max. Dimensions, mass 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 3.0 kg (105.8 oz) > Each Unit Includes Power cord EXT I/O male connector Operation manual Operation guide

±0.16% accuracy & 0.01µohm resolution performance in automated systems Superb repeatable measurement accuracy Provide advanced contact-check, comparator, and data export functions It is intuitive user interface and strong noise immunity are suitable for use in automated systems Measurement method Four-terminal, constant-current DC Resistance range 10 mohm (Max. 12.00000 mohm, 0.01 µohm resolution) to 1000 ohm range (Max. 1200.000 ohm, 1 mohm resolution), 7 steps Display Monochrome graphic LCD 240 × 64 dot, white LED backlight Measurement accuracy [at 10 mohm range, with SLOW mode, average 16 times settings] ±0.060 % rdg. ±0.001 % f.s. Testing current [at 10 mohm range] 1 A DC to [at 1000 ohm range] 1 mA DC Open-terminal voltage 20 V DC max. Note: Voltage when not measuring is 20 mV or less, with current mode set at PULSE and Contact Improver Setting set at OFF/PULSE (measured with a voltmeter having 10 Mohm) Sampling rate FAST, MEDIUM, SLOW, 3 settings Integration time [at 10 mohm range, default value] FAST 2.0 ms, MED 5.0 ms, SLOW 1 PLC, Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period) Other functions Comparator (compare setting value with measurement value), Delay, OVC (offset voltage compensation), Average, Measurement fault detection, Probe short-circuit detection, Improve contact, Current mode setting (A pulse application function that applies current only during measurement), Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,. Interface External I/O, RS-232C, Printer, GP-IB (Model RM3543-01) External I/O Trigger, Hold input, Comparator output, Settings monitor terminal, Service power output 5V, 12V, etc. Power supply, consumption 100 to 240 V AC, 50/60 Hz, 40 VA max. Dimensions, mass 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 3.0 kg (105.8 oz) > Each Unit Includes Power cord EXT I/O male connector Operation manual Operation guide

Wide Range Capability 0mO to 3.5MO (RM3544), 0µO to 3.5MO (RM3548) 0.02% Accuracy Quick Identifiable Pass/ Fail Judgement (Both Audible and Visual) Capture up to 1000 Data Points (RM3548 Only) > Each Unit Includes Power Cord L2101 Clip lead Manual

0.006% basic accuracy, 0.01 µO max. resolution, 1A max. testing current Measure from 0.00 µO (testing current 1 A) to 1200 MO Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only) Low-power resistance measurement with an open voltage not exceeding 20 mV High-speed, comprehensive productivity support delivers decisions in as little as 2.2 ms from start to finish

0.006% basic accuracy, 0.01 µO max. resolution, 1A max. testing current Measure from 0.00 µO (testing current 1 A) to 1200 MO Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only) Low-power resistance measurement with an open voltage not exceeding 20 mV High-speed, comprehensive productivity support delivers decisions in as little as 2.2 ms from start to finish

Resistance Meter with Multiplex Interface 0.006% basic accuracy, 0.01 µO max. resolution, 1A max. testing current Measure from 0.00 µO (testing current 1 A) to 1200 MO Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only) Low-power resistance measurement with an open voltage not exceeding 20 mV High-speed, comprehensive productivity support delivers decisions in as little as 2.2 ms from start to finish