Showing 10–18 of 46 results
-
$166
The FLIR CM82 is an industrial grade 600A Power Clamp Meter with variable frequency drive (VFD) and Harmonics functions designed for advanced power analysis. VFD Mode Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment. > Harmonics Mode Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress. > Phase Rotation Analyze three-phase systems to measure power draw and verify if power is evenly balanced. > Inrush Current Measure hard and soft start-up inrush current spikes while equipment is ramping up. > Power Factor and Active Power Monitor power quality improvements, such as start-up realignments on three-phase equipment. > Bright Dual-LED Worklights Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets. > Rugged & Shock-Resistant Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability. >
-
$220
The FLIR CM85 is an industrial grade 1000A True RMS Power Clamp Meter with variable frequency drive (VFD) and Harmonics functions as well as bluetooth and remote data sharing capabilities designed for advanced power analysis. VFD Mode Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment. > Harmonics Mode Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress. > Phase Rotation Analyze three-phase systems to measure power draw and verify if power is evenly balanced. > Inrush Current Measure hard and soft start-up inrush current spikes while equipment is ramping up. > METERLiNK Compatibility Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation. > Power Factor and Active Power Monitor power quality improvements, such as start-up realignments on three-phase equipment. > Bluetooth Connectivity Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords. > Bright Dual-LED Worklights Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets. > Rugged & Shock-Resistant Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability. >
-
$192
The FLIR CM94 tackles high-current measurements on demanding utility and industrial job sites. This rugged meter securely clamps larger conductors with an oversized jaw so you can take readings up to 2000 A AC & DC. With a CAT IV-1000 V safety rating, the CM94 is ready to work on overhead, underground and utility service equipment. Plus, it offers VFD mode to tackle noisy signal environments. The full-featured FLIR CM94 utility clamp meter delivers results for utility and industrial electricians. Designed for safety so you can focus on results Get the right tool for high-current work with a CAT IV 1000 V protection rating and the ability to read up to 2000 A. Functions you need to work faster & smarter This full-featured clamp meter with True RMS, LoZ, and VFD modes ensures accurate troubleshooting optimized for utility and industrial work. Built with features to simplify your workflow The oversized 55 mm jaw helps the ergonomic FLIR CM94 clamp around large conductors or multiple conductors at once Greater Safety So You Can Focus On Results Get the right tool for high current jobs with improved safety built in CAT IV-1000 V rating protects from dangerous transient overvoltage near utility service equipment Get accurate current readings on high current equipment up to 2000 A AC/DC Eliminate errors from residual ghost voltage using LoZ (low impedance) mode > Packed with the functions you need This full-featured clamp meter saves time and helps you troubleshoot effectively Trust accurate AC voltage and current measurements with True RMS, LoZ, and VFD mode to filter signal noise Troubleshoot connections and components with a Continuity test mode Measure resistance, frequency, and temperature Work your way with both auto- and manual-ranging settings > The right tool for industrial jobs The FLIR CM94 features an oversized jaw to clamp around large conductors or multiple conductors Generous jaw opening of 55 mm (2.2 in) Perfect for industrial electricians, utility workers, and electrical contractors Ergonomic design is easy to hold with thumb dial for one-hand operation Bright, large backlit 6000 count display thats easy to read in any conditions
-
$138
The FLIR DM166 is a must-have tool for commercial electricians, automation, electronics, and HVAC technicians. Featuring Infrared Guided Measurement (IGM) thats powered by a built-in 80 x 60 FLIR thermal imager, the DM166 visually guides you to the precise location of potential problems. It includes the essential measurement features you demand from a multimeter including True RMS AC/DC voltage and current, non-contact voltage detection, VFD mode, and more. The DM166 is the most affordable multimeter with built-in thermal imaging to date. A built-in 80 x 60 resolution thermal camera sensor visually guides you to an electrical problem Thermal Image Palettes: Rainbow, iron, gray scale –10 to 150°C (14 to 302°F) Focus: Fixed True RMS 600.0 V 600.0 mV 600.0 V RMS 10.00 A 600.0 mA 4000 µA 99.99 kHz
-
$193
The FLIR DM166 is a must-have tool for commercial electricians, automation, electronics, and HVAC technicians. Featuring Infrared Guided Measurement (IGM) thats powered by a built-in 80 x 60 FLIR thermal imager, the DM166 visually guides you to the precise location of potential problems. It includes the essential measurement features you demand from a multimeter including True RMS AC/DC voltage and current, non-contact voltage detection, VFD mode, and more. The DM166 is the most affordable multimeter with built-in thermal imaging to date. With NIST A built-in 80 x 60 resolution thermal camera sensor visually guides you to an electrical problem Thermal Image Palettes: Rainbow, iron, gray scale –10 to 150°C (14 to 302°F) Focus: Fixed True RMS 600.0 V 600.0 mV 600.0 V RMS 10.00 A 600.0 mA 4000 µA 99.99 kHz
-
$526
The FLIR DM285-FLEX-KIT makes finding, measuring, and sharing problem hot spots easier and more efficient than ever. Use the unique features of the DM285 to quickly pinpoint problems, wirelessly transfer data, and streamline inspections with the new FLIR InSite™ workflow management tool. This kit also includes a TA74 flex current probe for taking measurements in tight spaces, a carrying case, and a rechargeable battery. DM285 Identify energized and faulty equipment from safe distances with non-contact temperature measurement Streamline inspections and simplify data collection, sharing, and reporting by wirelessly connecting to FLIR InSite professional workflow management tool Save electrical parameter data and thermal images with onboard data storage Solve challenging problems with 18-function DMM including VFD mode, True RMS, LoZ, NCV, a built-in worklight, and laser pointer Measure voltage, current, frequency, resistance, continuity, diode, capacitance, and temperature Operate easily with intuitive menu system Rely on meters drop-tested durability in any working condition Change the battery quickly and easily with no tool battery compartment See readings clearly on TFT display with wide viewing angle > TA74 Compatible with most DMMs and clamp meters, regardless of brand Has a flex coil length of 18 and a max conductor diameter of 4.7 Snake the coil around obstacles with ease, even in deep, crowded cabinets Measure multiple conductors and targets with limited clearance Switchable AC current range 30A, 300A, 3000A Adds 3000A AC current measurements to existing meters Standard banana plug connectors fit most meters AC voltage output for wide compatibility Bright, dual LED worklights provide built-in illumination for dark cabinets Rugged design drop-tested to 3 meters, portable and lightweight > TA10-F Case Only (Instruments not included) Form-fitting instrument compartment Concealed zipper resists dirt Resilient nylon carry strap Rugged, non-slip finish > TA04-KIT Lithium Polymer Rechargeable battery kit For use with Model DM285
-
$415
The FLIR DM285-KIT makes finding, measuring, and sharing problem hot spots easier and more efficient than ever. Use the unique features of the DM285 to quickly pinpoint problems, wirelessly transfer data, and streamline inspections with the new FLIR InSite™ workflow management tool. This kit also includes a TA04 Lithium-Polymer Rechargeable Battery Kit. DM285 Identify energized and faulty equipment from safe distances with non-contact temperature measurement Streamline inspections and simplify data collection, sharing, and reporting by wirelessly connecting to FLIR InSite professional workflow management tool Save electrical parameter data and thermal images with onboard data storage Solve challenging problems with 18-function DMM including VFD mode, True RMS, LoZ, NCV, a built-in worklight, and laser pointer Measure voltage, current, frequency, resistance, continuity, diode, capacitance, and temperature Operate easily with intuitive menu system Rely on meters drop-tested durability in any working condition Change the battery quickly and easily with no tool battery compartment See readings clearly on TFT display with wide viewing angle > TA04-KIT Lithium Polymer Rechargeable battery kit For use with Model DM285
-
$499
The FLIR DM284/DM285 combine thermal imaging with a rich set of digital multimeter features in one convenient diagnostic tool. Infrared Guided Measurement (IGM) technology – powered by the built-in FLIR thermal imager – helps pinpoint the exact location of electrical issues, so you can troubleshoot them fast. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools or the new FLIR InSiteTM workflow management app. IGM™ With NIST A built-in 160 x120-resolution thermal camera sensor visually guides you to an electrical problem 18 measurement functions Performs 18 measurement functions including True RMS, VFD mode, LoZ, NCV, and more Thermocouple input & test leads The DM284/DM285 come with high-quality test probes and a Type-K thermocouple input Durable and drop-tested, with an Intuitive user interface, large display screen, onboard laser pointer, LED worklights Drop-tested and IP rated for splash and water resistance FLIR 10-year warranty on product and detector
-
$154
The DM62 has essential measurement features including True RMS AC/DC voltage and current, non-contact voltage detection, VFD mode, and extended voltage measurement range up to 600 V. Whether youre a commercial electrician, electronics technician, or just need the right tool for DIY, the DM62 provides precise measurements and quality construction for everyday use. With NIST
