Electric

HALO I high voltage true RMS digital ammeter 0-2000 amps AC with fork style sensing head For use on voltages up to 69kV class 40kV line-to-ground) True RMS reading instrument 0-2000 amp auto-ranging LCD display Track and peak-hold modes available Hook style sensing heads Universal spline for standard hotstick attachment Powered by a field replaceable 9-volt alkaline battery Auto shut-off > Each Unit Includes Padded Nylon Carrying Bag

HALO II high voltage true RMS digital ammeter 0-2000 amps 9390 AC with peak-hold and tracking mode and hook style sensing head, Peak Hold and Track Modes Auto-ranging LCD display True RMS reading Display: 3.5 digit, Liquid Crystal Display (LCD) Maximum Amperes: 1999 Minimum Amperes: 0.1 Overload: Above 1999, display indicates 1 Display Response Time: 3 seconds to full scale Accuracy: 3% of reading ± 1 digit Temperature Range: 0°F 122°F (-18°C 50°C) Auto shut-off Operating Humidity Range: 80% RH at 120°F Maximum Voltage: 69kVAC (phase-to-phase) Power Supply: Replaceable 9V DC alkaline battery with 40 hours of continuous operation Control Panel: Membrane type, tactile response Dimensions: 28 long (71 cm) Dimensions Core Opening: 2.3 wide x 3.7 deep with conductor centering design (5.8 cm x 9.4 cm) Weight: 2 lbs. 13 oz. (1.28 kg) > Each Unit Includes Padded Nylon Carrying Case

HALO II high voltage true RMS digital ammeter 0-2000 amps AC with peak-hold and tracking mode and fork style sensing head For use on voltages up to 69kV class (40kV line-to-ground) True RMS reading instrument 0-2000 amp auto-ranging LCD display Track and peak-hold modes available Hook or fork style sensing heads Universal spline for standard hotstick attachment Powered by a field replaceable 9-volt alkaline battery Auto shut-off > Each Unit Includes Padded Nylon Carrying Bag

The CFT-35 is for use only with two stick voltmeters for testing leakage current in underground primary voltage cables Can be used on grounded systems with a maximum line-to-ground voltage of 21.1kV Operation at higher voltages may damage the CFT-35 and provide erroneous test results

The Dual Display Digital Voltmeter, model DDVM-40, is a compact, high accuracy dual display voltmeter and phasing set with capacitive test point mode and peak hold. Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions. The two LED displays are synchronized so that the same voltage reading is shown on both displays. Measures Voltage from 5V-40kV Oversized, Bright LED Display on Both Displays One Button Operation for Test Modes: Line to Line Measurements Line to Ground Measurements Capacitive Test Point Cable Fault Testing Real Time & Peak Hold Reporting > Use in Overhead and Underground Applications Dual Hot Stick Connections Universal Spline and Shotgun Stick Dual Battery Monitor with Auto Shut Off > Each Unit Includes (2) 025-OLPS-5 Overhead Hook Brass Probes CS-DDVM Case

Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions. The two LED displays are synchronized so that the same voltage reading is shown on both displays. Measures Voltage from 5V-40kV Oversized, Bright LED Display on Both Displays One Button Operation for Test Modes: Line to Line Measurements Line to Ground Measurements Capacitive Test Point Cable Fault Testing Real Time & Peak Hold Reporting > Use in Overhead and Underground Applications Dual Hot Stick Connections Universal Spline and Shotgun Stick Dual Battery Monitor with Auto Shut Off > Each Unit Includes DDVM-40 (2) 025-OLPS-5 (1) PT-5000B (2) ASP-15/25 (1) CFT-35 CS-DDVM Case

For use on system voltages up to 161kV Large LED display indicates the line-to-ground voltage level Display is easy to read in bright or dark conditions Voltage readout allows user to distinguish between nominal and induced voltage levels Audible indication when voltage is detected Built-in universal spline for standard hotstick attachment Auto shut-off with low battery function DVI Voltage Detector Tester (PT-DVI, optional) available as a power source to test the DVI before and after use > Each Unit Includes HP-DVI-2 CS-DVI Case

For use on system voltages up to 161kV (reads up to 99kV line-to-ground) Large auto-ranging LED display indicates the line-to-ground voltage level Audible indication when voltage is detected Voltage readout allows user to distinguish between nominal and induced voltage Measure Elbow Test Points with the DVI-100T (underground probe required) Use on overhead lines or in underground applications with bushing probe Built-in universal spline for standard hotstick attachment LED’s operate in extreme temperatures Easy-to-read in bright or dark conditions Built-in self-test to verify proper operation Auto-shutoff with low battery function Powered by a field-replaceable 9V lithium or alkaline battery No range selector switch or settings required Compact, rugged and lightweight polycarbonate housing > Each Unit Includes DVI-100 (1) HP-DVI-2 (1) IEP-DVI-5 (1) PT-DVI CS-DVI Case