Showing 334–342 of 633 results
-
$740
Ideal for industrial applications, the Series IF Industrial Direct Reading Flowmeters are fully enclosed in a brushed stainless steel case. The flowmeters can directly measure flow rates up to 116 GPM (439 lpm) for water and 250 SCFM (7080 lpm) for air service. The detachable, clear 3/16 thick polycarbonate front shield provides protection at maximum rated temperature and pressure. Each unit is designed with female NPT end fittings for easy in-line installation. Max. flow rate 86 GPM (326 LPM) water, pressure drop 25 w.c., 2 female NPT
-
$740
Ideal for industrial applications, the Series IF Industrial Direct Reading Flowmeters are fully enclosed in a brushed stainless steel case. The flowmeters can directly measure flow rates up to 116 GPM (439 lpm) for water and 250 SCFM (7080 lpm) for air service. The detachable, clear 3/16 thick polycarbonate front shield provides protection at maximum rated temperature and pressure. Each unit is designed with female NPT end fittings for easy in-line installation. Max. flow rate 116 GPM (439 LPM) water, pressure drop 45 w.c., 2 female NPT
-
$1.090
For Series MC Multi-Cal Pressure Calibrator > Each Unit Includes NIST calibration certification
-
$2.017
Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable pressure modules (sold separately) in any combination of range or accuracy. Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of twelve preprogrammed engineering units or any single user-defined unit. Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates. Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. The automatic % error calculation simplifies transmitter calibration. Easily upload stored data to an IBM compatible computer via the RS232 two-way communications port. Calibrators and modules include certification to NIST traceabilityideal as a secondary standard for calibrating pressure equipment. Multi-Cal Pressure Calibrator includes utility software, protection module, adjustment handle, AC adapter, and instruction manual. Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Benchtop calibrator accepts up to two pressure modules. Modules include NIST calibration certification.
-
$215
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2 to 24 and can be used with compatible liquids and gases. Mounted with standard flanges Standard corner tap configuration Corrosion free material Simplified installation Built in metering taps (1/4 female NPT STD) Proven through a wide range of applications for accuracy and energy efficiency Assures long term reliability and accuracy 2.5 line size 0.750 bore 0.30 Beta water capacity: 20 d.p. W/C, 8.63 GPM flow air capacity: 20 d.p. W/C, 32.71 SCFM @ 14.7 psia, 50.64 SCFM @ 20 psig, 92.48 SCFM @ 100 psig 4 lb
-
$215
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2 to 24 and can be used with compatible liquids and gases. Mounted with standard flanges Standard corner tap configuration Corrosion free material Simplified installation Built in metering taps (1/4 female NPT STD) Proven through a wide range of applications for accuracy and energy efficiency Assures long term reliability and accuracy 2.5 line size 1.250 bore 0.50 Beta water capacity: 100 d.p. W/C, 55.54 GPM flow air capacity: 100 d.p. W/C, 197.54 SCFM @ 14.7 psia, 317.58 SCFM @ 20 psig, 590.91 SCFM @ 100 psig 4 lb
-
$215
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2 to 24 and can be used with compatible liquids and gases. Mounted with standard flanges Standard corner tap configuration Corrosion free material Simplified installation Built in metering taps (1/4 female NPT STD) Proven through a wide range of applications for accuracy and energy efficiency Assures long term reliability and accuracy 2.5 line size 1.750 bore 0.70 Beta water capacity: 320 d.p. W/C, 216.30 GPM flow air capacity: 200 d.p. W/C, 543.99 SCFM @ 14.7 psia, 936.56 SCFM @ 20 psig, 1798.86 SCFM @ 100 psig 4 lb
-
$236
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2 to 24 and can be used with compatible liquids and gases. Mounted with standard flanges Standard corner tap configuration Corrosion free material Simplified installation Built in metering taps (1/4 female NPT STD) Proven through a wide range of applications for accuracy and energy efficiency Assures long term reliability and accuracy 3 line size 0.920 bore 0.30 Beta water capacity: 20 d.p. W/C, 12.97 GPM flow air capacity: 20 d.p. W/C, 49.17 SCFM @ 14.7 psia, 78.13 SCFM @ 20 psig, 139.06 SCFM @ 100 psig 5 lb
-
$236
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2 to 24 and can be used with compatible liquids and gases. Mounted with standard flanges Standard corner tap configuration Corrosion free material Simplified installation Built in metering taps (1/4 female NPT STD) Proven through a wide range of applications for accuracy and energy efficiency Assures long term reliability and accuracy 3 line size 1.500 bore 0.49 Beta water capacity: 100 d.p. W/C, 79.94 GPM flow air capacity: 100 d.p. W/C, 282.9 SCFM @ 14.7 psia, 454.77 SCFM @ 20 psig, 846.21 SCFM @ 100 psig 5 lb
