Showing 496–504 of 504 results
-
$1.201
The GE Druck PV621 95% vacuum to 20 bar (300 psi) pneumatic pressure station has a conventional hand pump, volume adjuster and pressure/vacuum selector, but will generate pressure with half the effort of conventional systems. A uniquely capable, re- rangeable and self contained pressure test system Advanced pressure generation Vacuum to 20 bar (300 psi) pneumatic Vacuum to 100 bar (1500 psi) pneumatic 0 to 1000 bar (15000 psi) hydraulic Stand alone replacements for hand pumps Bench top use as comparators
-
$1.761
Each pressure station is designed for stand-alone operation as a pressure generator and can replace conventional hand pumps to provide greater efficiency and ease of use. They can also be used on the workbench as a comparators. A uniquely capable, re-rangeable and self contained pressure test system Advanced pressure generation 95% vacuum to 20 bar (300 psi) pneumatic 95% vacuum to 100 bar (1500 psi) pneumatic 0 to 1000 bar (15000 psi) hydraulic Stand alone replacements for hand pumps Bench top use as comparators
-
$2.359
The GE Druck PV 621/G is a pneumatic pressure generator for pressures 95% vacuum to 20 bar (300 psi). Each pressure station is designed for stand-alone operation as a pressure generator and can replace conventional hand pumps to provide greater efficiency, ease of use and significantly reduce the risk of repetitive strain injuries. It can also be used on the workbench as a comparators. A uniquely capable, re-rangeable and self contained pressure test system Advanced pressure generation Vacuum to 20 bar (300 psi) pneumatic Vacuum to 100 bar (1500 psi) pneumatic 0 to 1000 bar (15000 psi) hydraulic Stand alone replacements for hand pumps Bench top use as comparators
-
$726
Compatible with All DPI 800 and DPI 150 Series Models GE Druck Universal Pressure Modules provide a cost-effective solution for expanding instrument ranges, adding pressure measurement capability and addressing more applications IDOS = Intelligent Digital Output Sensors Pressure Ranges from 10inH2O to 10,000 PSI (25 mbar to 700 bar) Gauge and Absolute Versions 0.05% Full Scale (FS) All Inclusive Accuracy Fully Interchangeable, No Setup > Each Unit Includes Calibration Certificate User Guide
-
$533
Measure or Source 0 to 24 mA Accuracy 0.01% of reading Dual mA and % readout, linear or flow Step, Span Check, Valve Check, Ramp 60 Volt DC measurement HART® compatible Simultaneous % readout, displays mA and percentage value of 4 to 20 or 0 to 20 mA UPS III also converts to mA readings to % Flow Continuity and switch test facility 1.2 x 2.1 Graphic Display with menu driven interface Adjustable display contrast Adjustable resolution Battery voltage and battery low indicator Information screen reports serial number, software version and calibration date Uses standard AA batteries > Each Unit Includes Rubber over-boot which provides maximum impact protection, Bench stand Hanging loop Certificate of calibration User guide Test leads Set of alkaline batteries
-
$752
Certified for use in hazardous areas, ATEX: II 2G Ex ib IIC T4 (-10°C<,Ta<, 40°C), Certificate number BASEEFA 06ATEX0224X, IEC: Ex ib IIC T4 (-10°C<,Ta<, 40°C), Certificate number IECEx BAS 06.0053X ATEX/IEC intrinsically safe Measure or source 0 to 24 mA Accuracy 0.015% of reading Dual mA and % readout, linear or flow Step, span check, valve check, ramp 50 VDC measurement and continuity HART® compatible Dimensions (w x h x d) 3.5 in x 5.5 in x 1.7 in (90 mm x 140 mm x 42 mm) Weight 16.2 oz (460 g) including batteries and leather case Display Graphic LCD, 1.2 in x 2.1 in (31 mm x 54 mm) > Each Unit Includes Leather case Carry strap Certificate of calibration User guide Test leads Alkaline batteries
-
$300
The 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the 289 be your watchdog for systems or processes while you are off doing other jobs. Now communicate wirelessly with your iOS and Android smart devices with the Fluke Connect mobile app and ir3000 FC wireless connector (sold separately). 50,000 count, 320 x 240 Dot matrix LCD display with white backlight. Multiple sets of measurement information are now available in this easy to read display 0.025% Basic DC accuracy Logging function with TrendView plots measurements as single line to help detect anomalies F1 F4 Soft keys provide flexible user function menus Navigation keys allow the user to quickly select menu choices and scroll through the information screens LoZ: low input impedance function helps prevents false readings due to ghost voltage 50 Ohm Range for motor winding and low ohm measurements Low Pass Filter, allows for accurate measurements on motor drives Saved measurements allows the user to name and recall measurements made in the field Field upgradeable and expandable meter as new capabilities added Record events and trends helpful for troubleshooting intermittent problems or profiling loads i-info button on board help screens for measurement functions. Unsure about a function- Go to that function and Press the i button Multi lingual interface Internal memory allows stand-alone logging for up to 180 hours Preferred measurement setups can be easily saved True-rms ac voltage and current for accurate measurements on complex signals or non linear loads AC bandwidth specified to 100 kHz. Current measurement 20A (30 seconds momentary, 10A continuous) Peak capture to record transients as fast as 250µs Continuity/Conductance/Capacitance Resistance and continuity Min/Max/Average with Time Stamp to record signal fluctuations Compatible with optional magnetic hanger (ToolPak) for hands free operation Optical USB communication interfac CAT III 1000 V / CAT IV 600 V safety rated Limited lifetime warranty > Each Unit Includes 6 AA Batteries, installed TL71 Silicone test leads AC72 Alligator clips
-
$2.458
-1 to 10 bar / -14.5 to 300 psi gauge range For 30 years the DPI 600 series has been the benchmark for accuracy and pressure generation, and today the DPI 610 is the industry standard simply referred to as the Druck. The new DPI 611 builds on this legacy to provide a highly dependable, quick and simple solution to streamline your pressure maintenance and calibration routines. 50% smaller and 33% lighter than the DPI 610 Generates 0 to 300 PSI in less than 30 seconds (test device connected by 3 foot hose) Pressure measurement twice as accurate (accuracy defined as uncertainty including one year stability and temperature errors) Three times better electrical accuracy Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVORITES storage 3-touch set-up for any application Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software > Choose Your Options:
-
$1.488
Universal Quick-test Hose and Adapter Kit Kits take the guesswork out of selecting adapters by providing a selection of the most popular combinations of hoses and adapters A kit that contains all the necessary fittings and hoses to connect to any pressure transmitter, gauge or manifold ABS case with foam cut-outs makes it easy to see if any adapters are missing Construction Brass, Stainless Steel Seal materials Buna-N, Delrin, Teflon 600 PSI Pneumatic Hand Pump (VAC/Pressure)- -28.5 Hg to 600 PSI in a single pump Precision vernier and vent controls Easy to pump Switch between Vacuum & Pressure with a push of a button Designed to endure harsh environments Superior pumping action Size: 8.7 High Weight: 1.5 lbs ProLine Digital Pressure Gauge w/ Boot, 500 PSI, 0.05% Accuracy- Accuracy: ±0.05% F. S (Temperature Compensated) Rubber Boot Standard Available in Pressure Ranges VAC to 10,000 Psi Displays in 18 standard or Fully Custom Engineering Units Displays Ambient Temperature in °F or °C Large, Back-lit, 5-1/2 Digit Display Rugged Stainless Steel Case Meets NEMA 4/IP65 CSA Intrinsically Safe, Class 1, Div.2 / CE Approved Rear Mount and 24 VDC Versions Available > Each Unit Includes 1/8 , 1/4 3/8 1/2 Male NPT 1/8 , 1/4 Male NPT Quick-disconnect 1/8, 1/4, 3/8, 1/2 Female NPT 1/8, 1/4, 1/2 Female NPT Quick-disconnect adapters 1/4, 3/8, 1/2 Tube adapters Tee to connect 3 Quick-test hoses Union to connect 2 Quick-test hoses DP Transmitter stinger probes Pneumatic Hand Pump 3 Low volume hose with integral 1/4 fitting Instructions Proline Digital Gauge with Boot
