Showing 10–18 of 504 results
-
$2.458
The GE Druck DPI 611 is a fully self-contained pressure test and calibration system which combines pressure generation, signal measurement and loop power to provide all the convenience necessary to be an everyday tool for maintaining and calibrating pressure instruments. -1 to 1 bar / -14.5 to 15 psi gauge range For 30 years the DPI 600 series has been the benchmark for accuracy and pressure generation, and today the DPI 610 is the industry standard simply referred to as the Druck. The new DPI 611 builds on this legacy to provide a highly dependable, quick and simple solution to streamline your pressure maintenance and calibration routines. 50% smaller and 33% lighter than the DPI 610 Generates 0 to 300 PSI in less than 30 seconds (test device connected by 3 foot hose) Pressure measurement twice as accurate (accuracy defined as uncertainty including one year stability and temperature errors) Three times better electrical accuracy Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVORITES storage 3-touch set-up for any application Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software
-
$2.453
The GE Druck DPI 611 is a fully self-contained pressure test and calibration system which combines pressure generation, signal measurement and loop power to provide all the convenience necessary to be an everyday tool for maintaining and calibrating pressure instruments. -1 to 7 bar / -14.5 to 100 psi gauge range For 30 years the DPI 600 series has been the benchmark for accuracy and pressure generation, and today the DPI 610 is the industry standard simply referred to as the Druck. The new DPI 611 builds on this legacy to provide a highly dependable, quick and simple solution to streamline your pressure maintenance and calibration routines. 50% smaller and 33% lighter than the DPI 610 Generates 0 to 300 PSI in less than 30 seconds (test device connected by 3 foot hose) Pressure measurement twice as accurate (accuracy defined as uncertainty including one year stability and temperature errors) Three times better electrical accuracy Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVORITES storage 3-touch set-up for any application Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software
-
$2.453
The GE Druck DPI 611 is a fully self-contained pressure test and calibration system which combines pressure generation, signal measurement and loop power to provide all the convenience necessary to be an everyday tool for maintaining and calibrating pressure instruments. -1 to 10 bar / -14.5 to 150 psi gauge range For 30 years the DPI 600 series has been the benchmark for accuracy and pressure generation, and today the DPI 610 is the industry standard simply referred to as the Druck. The new DPI 611 builds on this legacy to provide a highly dependable, quick and simple solution to streamline your pressure maintenance and calibration routines. 50% smaller and 33% lighter than the DPI 610 Generates 0 to 300 PSI in less than 30 seconds (test device connected by 3 foot hose) Pressure measurement twice as accurate (accuracy defined as uncertainty including one year stability and temperature errors) Three times better electrical accuracy Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVORITES storage 3-touch set-up for any application Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software
-
$8.823
GE Druck DPI 620 GENII IS Genii intrinsically safe advanced modular calibrator and HART/Fieldbus communicator 3 tools in 1 – calibrator, test meter and HART® communicator Foundation Fieldbus and Profibus communicator Easy to use including large colour screen and one touch menus Automates procedures, documents results and integrates with calibration software Best in class accuracy for pressure, electrical, temperature and frequency Modular: re-range in the field, configure by application, expand when needs change ATEX and IECEx approval for hazardous use Multi-function capabilities allows significant inventory reductions and simplifies training Temperature range extended: -10 to 50 oC Improved battery management – exchange in hazardous areas, no tools required Independent battery charge indicator Improved daylight readability of display HART®, Foundation Fieldbus and Profibus communicator options Complete device description libraries and free updates Internal mA loop power and communicator power hubs Internal menu selected HART® loop resistor Simple and user friendly touch screen interface. Quick launch menu applications such as DASHBOARD, TASK selection & FAVORITES Accuracy from 0.006%RDG 0.005%FS for mA Pressure accuracy from 0.005%FS Fully documenting – automated procedures, PASS/FAIL errors, results storage Interface to GE calibration software or other leading calibration software packages More than enough storage for a complete plant database of procedures, results and supporting documents Pressure Generation Stations: Advanced pressure generation 95% vacuum to 20 bar/300 psi pneumatic 95% vacuum to 100 bar/1500 psi pneumatic 0 to 1000 bar/15,000 psi hydraulic Replace hand pumps > Pressure Measurement Modules: 25 mbar to 1000 bar (10 inH2O to 15000 psi) Accuracy from 0.005%FS Fully interchangeable modules with no need for set-up, calibration or tool. Quick-to-fit pressure adaptors and hoses – no tools or seals required > > Each DPI 620G-IS-FF Includes rechargeable lithium ion battery P/N DPI620G-IS-BATTERY universal mains adaptor P/N IO620-PSU charger P/N DPI620-IS-CHARGER test leads calibration certificate quick reference guide
-
$837
Source and Measure mA, mV or V Dual Reading Capability 24V Loop Supply to Power Transmitters and Loops Large Backlit Display, Menu Driven Interface HART® Loop Resistor Impact Resistant, Elastomer Protected Robust and Weatherproof Compact, Simple to Use, Easy to Carry Compatible with IDOS Pressure Modules from 10 inH20 to 10,000 PSI 1000 Screen Data Storage with Real Time Clock > Each Unit Includes Calibration Certificate Batteries Test Leads
-
$991
The GE Druck DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on. Frequency Meter and Generator with Three Output Waveforms from 0.1V to 24V Amplitude Measure or Source 0.01 Hz to 50 kHz CPM, CPH and Totalizing Counter Sine, Square and Triangular Waveforms mA Measure, Switch Test and 24V Loop Power Large Backlit Display, Menu Driven Interface Hart® Loop Resistor Compatible with IDOS Pressure Modules from 10 inH20 to 10,000 PSI Impact Resistant, Elastomer Protected > Each Unit Includes Calibration Certificate Batteries Electrical Test Lead Set
-
$2.453
The GE Druck DPI 611 is a fully self-contained pressure test and calibration system which combines pressure generation, signal measurement and loop power to provide all the convenience necessary to be an everyday tool for maintaining and calibrating pressure instruments. -1 to 2 bar / -14.5 to 30 psi gauge range For 30 years the DPI 600 series has been the benchmark for accuracy and pressure generation, and today the DPI 610 is the industry standard simply referred to as the Druck. The new DPI 611 builds on this legacy to provide a highly dependable, quick and simple solution to streamline your pressure maintenance and calibration routines. 50% smaller and 33% lighter than the DPI 610 Generates 0 to 300 PSI in less than 30 seconds (test device connected by 3 foot hose) Pressure measurement twice as accurate (accuracy defined as uncertainty including one year stability and temperature errors) Three times better electrical accuracy Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVORITES storage 3-touch set-up for any application Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software
-
$4.044
These fully self-contained pressure test and calibration systems have interchangeable pressure modules for flexible ranging, generate hydraulic pressure, measure process signals and supply loop power. They provide all the convenience of the Druck DPI 610/615 series with significantly improved generation capabilities, higher accuracy and simplified touch screen operation. Pressure Range: 0 to 10,000 gauge/absolute Maximum working pressure: 1000 bar / 15000 psi hydraulic Pressure media: De-mineralized water or mineral oil (ISO viscosity grade <, 22). 100cc internal reservoir Pressure connection: Quick-to-fit connection system with G1/8 female and 1/8 NPT female adaptors Size and weight: 350 mm x 170 mm x 170 mm ( 13.7 in x 6.7 in x 6.7 in) excluding accessories 4.7 kg (10.4 lb) including battery and pressure module Priming pump, pressure intensifier/fine adjuster, non-return valve, precision release valve > Each Unit Includes PM 620 pressure module, 0 to 10,000 psi Rechargeable battery Hose kit Carry case Pressure relief valve includes battery charger ( IO620-PSU) carrying strap (IO612-STRAP) test leads (IO61X-LEADS) fluid bottle user guide calibration certificate
-
$4.044
These fully self-contained pressure test and calibration systems have interchangeable pressure modules for flexible ranging, generate hydraulic pressure, measure process signals and supply loop power. They provide all the convenience of the Druck DPI 610/615 series with significantly improved generation capabilities, higher accuracy and simplified touch screen operation. Pressure Range: 0 to 15,000 gauge/absolute Maximum working pressure: 1000 bar / 15,000 psi hydraulic Pressure media: De-mineralized water or mineral oil (ISO viscosity grade <, 22). 100cc internal reservoir Pressure connection: Quick-to-fit connection system with G1/8 female and 1/8 NPT female adaptors Size and weight: 350 mm x 170 mm x 170 mm ( 13.7 in x 6.7 in x 6.7 in) excluding accessories 4.7 kg (10.4 lb) including battery and pressure module Priming pump, pressure intensifier/fine adjuster, non-return valve, precision release valve > Each Unit Includes PM 620 pressure module, 0-15,000 psi Rechargeable battery Hose kit Carry case Pressure relief valve includes battery charger ( IO620-PSU) carrying strap (IO612-STRAP) test leads (IO61X-LEADS) fluid bottle user guide calibration certificate
