Showing 28–36 of 80 results
-
$205
True-rms Voltage Measurement up to 1000V ac/dc, resistance, frequency, THD (total harmonics distortion) and Individual Harmonics form 1 to 25, Power, Power Factor AC Current Measurement Up to 600A (ACD-50NAV, ACD 51NAV, ACDC-52NAV)/Up to 1000A (ACD-53NAV, ACDC-54NAV) DC Current Measurement Up to 600A (ACDC-52NAV)/Up to 1000A (ACDC-54NAV) Capacitance Measurement Temperature Measurement in °F or °C (ACD-51NAV, ACDC 54NAV only) temperature adapter and probe included DC micro amps (ACD-51NAV only) Phase rotation indication Non-contact voltage detection Inrush current measurement for motors Low pass filter for variable frequency drives Continuity beeper Min, max and smart data hold Peak hold Auto torch-light when clamping Large 1000 count display with active backlight and analog bar graph Auto power off 4 feet drop proof Deluxe carrying case included CAT IV 600V /CAT III 1000V Safety Standard > Each Unit Includes Carrying Case User Manual
-
$333
Amprobe Model # ACF-3000DM-A Ruggedly designed yet lightweight and flexible to install around conductors with limited access or where traditional current clamp-on transducers can not gain access. Two switchable AC Current ranges of 300 or 3000 Amps RMS with outputs of 1mV per Amp (300 A range) & 0.1 mV per Amp (3000 A range). Compatible with most multimeters, chart recorders, dataloggers, oscilloscopes that have an ACmV range and Amprobe’s Harmonic Analyzers. Wide frequency bandwidth ( 8Hz to 20KHz) to monitor a much wider range of Currents that contain Harmonic components with extreme accuracy. The ACF-3000DM measures 24 inches in length and can encircle a conductor up to 7.0 inches in diameter 2 “AA” alkaline batteries, instruction manual and leads are included. For continuous use, the ACF-3 external power supply is needed. > Each Unit Includes Transducer Instructions
-
$241
Prevent unplanned downtime by detecting leakage currents with the ALC-110 Leakage Current Clamp. Rated CAT III 600 V to ensure electrical safety, the ALC-110 is designed to resist external magnetic fields for highly accurate readings. Low influence of external low frequency magnetic fields: @ IN: 3.500 mA
-
$112
True RMS (TRMS) Measurements: Voltage up to 1000V AC/DC, Resistance, AC/DC Current, Frequency, Capacitance, Duty Cycle Optical isolated PC interface capability Crest (Peak hold), MAX, MIN MAX-MIN recording Auto and manual ranging Intelligent auto power off Data hold Relative zero mode Audible and visual warning against improper plug-in DC Loop Current 4-20mA dBm reading with 20 selectable impedance values Backlight display Large, easy to read large LCD display High speed analog bar graph Diode Test 4-20mA DC loop current Audible continuity Safety CAT IV 600V, CAT III 1000V > Each Unit Includes Test Leads Instruction Manual
-
$162
True RMS (TRMS) Precision accuracy to 0.02% Measurements: Voltage up to 1000V AC/DC, Resistance, AC/DC Current, Frequency, Capacitance, Duty Cycle Dual Temperature Optical isolated PC interface capability Crest (Peak hold), MAX, MIN MAX-MIN recording Auto and manual ranging Intelligent auto power off Data hold Relative zero mode Audible and visual warning against improper plug-in DC Loop Current 4-20mA dBm reading with 20 selectable impedance values Backlight display Large, easy to read large LCD display High speed analog bar graph Diode Test 4-20mA DC loop current Audible continuity Size: L317.6 x W177.8 x H76.2mm (12.5 x 7 x 3in) with clamshell Weight: 635g (1.4lb) with clamshell Safety: CAT IV 600V, CAT III 1000V > Each Unit Includes Thermocouple Test Leads With Set Of Alligator Clips Instruction Manual
-
$43
13 Features Measures AC/DC voltage up to 1000V, Current, Resistance, Frequency, Capacitance and Temperature Audible continuity Diode Test Auto and manual ranging Relative zero mode Data hold Peak hold (30ms response time) Backlight display Large, easy to read LCD display BEEP-JACK audible warning against improper connection Auto power off Size: 193(L) x 97(W) x 46(H)mm (7.6 X 3.8 X 1.8 in) Weight: Approx. 370 gm / 0.815 lb Safety: CAT III 600V > Each Unit Includes Test leads (pair) Banana plug K-type thermocouple Batteries installed User’s manual
-
$0
18 Features True RMS (TRMS) Measures AC/DC voltage up to 1000V, Current, Resistance,Frequency, Capacitance and Temperature Auto and manual ranging Auto power off Data hold Backlight display Large, easy to read LCD display Audible continuity Diode Test Size: L317.5 x W177.8 x H76.2mm (12.5 x 7 x 3in) with clamshell Weight: 689.46g (1.52lb) with clamshell Safety: CAT III 600V > Each Unit Includes Test leads (pair) Battery (installed) User’s manual Banana plug K type thermocouple
-
$12
Product Highlight Amprobe’s new hand-held Residential Digital Multimeter designed to safely and accurately troubleshoot a variety of automotive, household and commercial electrical issues. With this tool, you can quickly identify and measure ac and dc voltage, dc current, resistance and continuity in residential and commercial circuitry and its components—including outlets, small appliances, light fixtures, batteries (including car batteries) and extension cords— as well as test the continuity of fuses, light bulbs and electrical connections. Measuring under 5 inches long and weighing just over half a pound, its rugged, compact design allow for easy transport and use. With an operating battery life of 100 hours and operating temperature ranging from 32 degrees F to 104 degrees F, this tool is just as rugged and reliable as it is safe. Rated to CAT III 300V/CAT II 600V, it brings a third-party certified standard of safety to residential and commercial applications. It complies with: the requirements of relevant European health, safety and environmental protection legislation, with the applicable technical standards for Electromagnetic Compatibility (EMC), and has been independently certified by CSR for US and Canadian Markets. Measures AC/DC voltage up to 600V Measures DC current Test continuity with audible alert Data Hold Applications: Measuring AC Voltage in a circuitry component such as an outlet, light fixture, extension cord, appliance Measuring DC Voltage coming from a battery Checking if a fuse, lightbulb or battery are still working Detecting harmful levels of voltage Checking circuit load > > Each Unit Includes 9V battery detachable test leads printed user manual
-
$14
Amprobe AM-450 Highlights Verify presence of voltage in electrical sockets, extension cords, batteries and other electrical circuits up to 600 V Measures AC/DC Voltage up to 600 V, AC/DC Current to 10A, Resistance Micro amps function to troubleshoot flame sensors used in gas appliances Audible Continuity Diode test to verify diode polarity Data hold to retain readings on the screen Auto power off to conserve battery life Low battery warning helps avoid losing power in mid-measurement Prop stand for hands free operation Safety rating:C
