Bench Multimeters

13 built-in measurement functions 2000 readings/second at 4-1/2 digits Optional scanner cards for multipoint measurements IEEE-488 and RS-232 interfaces Fluke 8840/42 command set DC voltage sensitivity as low as 100nV and basic accuracy of 0.002% Accessories: Instruction Manual and Model 1751 Safety Test Leads > The Keithley 2000 61/2-Digit Multimeter is part of Keithleys family of high performance DMMs. Based on the same high speed, low noise A/D converter technology as the Model 2001 and 2002, the 2000 is a fast, accurate, and highly stable instrument thats as easy to operate as it is to afford. It combines broad measurement ranges with superior accuracy specifications DC voltage from 100nV to 1kV (with 0.002% 90-day basic accuracy) and DC resistance from 100µW to 100MW (with 0.008% 90-day basic accuracy). Optional switch cards enable multiplexing up to 20 different input signals for multipoint measurement applications. The 2000 offers exceptional measurement speed at any resolution. At 61/2 digits, it delivers 50 triggered rdgs/s over the IEEE-488 bus. At 41/2 digits, it can read up to 2000 rdgs/s into its internal 1024 reading buffer, making it an excellent choice for applications where throughput is critical.

The Keithley 2000-20 Scanning Multimeter is a special version of the Model 2000 6.5 Digit DMM. Its designed especially for switch-and-measure applications involving up to 20 inputs (channels). The DMM comes complete with the 20-channel scanner card already installed in the option slot, so its easy to create a self contained multi-point measurement solution. A quick-disconnect connector on the rear panel simplifies system set-up. The switching card can be controlled from the front panel or via the RS-232 or IEEE-488 interface. 6-1/2 Digit Multimeter with factory-installed 20-channel scanner card AC Current: 1A-3A AC Voltage Range: 100 mV-750 V DC Current: 10 mA-3 A DC Voltage Range: 100 mV 1000 V Frequency Range: 3 Hz 500 kHz Interface: HP-IB and RS-232 Number of Digits: 6.5 Resistance Range: 100 ohm 100 Mohm Switch up to 20 (2-pole) or 10 (4-pole) channels Scan rates up to 90 ch/s (DCV) Quick-disconnect rear panel connector Compatible with existing test software

6.5 Digital Multimeter at 220v Order #: 2000-20/E Mfg #: 2000-20/E

Digital Multimeter with scanner option Order #: 2000/2000-SCAN Mfg #: 2000/2000-SCAN

6.5 Digit Multimeter at 220v Order #: 2000/E Mfg #: 2000/E

The Keithley 2002 offers 8 .5 -digit resolution and basic DCV accuracy of 0.0018%, offering exceptional resolution, accuracy, and sensitivity. This high performance digital multimeter not only delivers performance specifications usually associated only with instruments that cost thousands more, but it also offers a broad range of functions not typically available in DMMs. For greater flexibility, a built-in card slot on the rear panel allows an additional multiplexer card for multi-point measurement applications. True 8-1/2 digit resolution Exceptional measurement integrity with high speed Broad range of built-in measurement functions High speed function and range changing Multiple measurement display Built-in 10 channel scanner option IEEE-488.2 and SCPI compatible HP 3458A emulation mode Accessories supplied: Model 8605 High Performance Modular Test Leads, users manual, option slot cover, and full calibration data.

With a noise floor of just 100nV RMS, the 7-1/2-digit Model 2010 is designed for high accuracy millivolt- and microvolt-level measurements. It also wraps up all the functions needed for characterizing the resistance, linearity, or isolation of contacts, connectors, switches, or relays in a single instrument. With built-in capabilities like a low power ohms mode, dry circuit testing, offset-compensated ohms, and a 10ohm range, the Model 2010 DMM is ideal for developing, validating, or production testing sensors, transducers, A/D and D/A converters, regulators, references, connectors, switches and relays. 7-1/2 Digit resolution 100nV rms noise floor 7ppm DCV repeatability Built-in 10-channel scanner mainframe Dry circuit and low power measurement mode 15 measurement functions including support for RTD and thermocouple temperature measurements Built-in ratio measurement function GPIB and RS-232 Interface

The Model 2100 provides stability, accuracy, and speed at a very low cost. It has 0.0038% 1-year basic DC voltage accuracy on the 10V range and 0.013% 1-year basic resistance accuracy on the 10kW range. At 6.5 digits, the Model 2100 delivers 50 triggered rdgs/s via the USB remote interface. At the fast 4.5 digit setting, it reads over 2000 rdgs/s into its 2000 reading internal buffer. High precision 6.5-digit DMM for critical measurements at a 5.5-digit price 11 measurement functions cover most commonly measured parameters Fully specified accuracies on all functions for ISO -compliant results Included PC software utilities for graphing and data sharing in both Microsoft Word and Excel Rugged construction for durability in bench/portable applications Selectable front/rear inputs facilitate bench or rack use Includes all accessories, such as startup software, USB cable, power cable, and safety test lead, for lowest total cost CE compliant and UL listed TMC compliant USB 2.0 interface for use with SCPI test programs